Vinyl Repair | McMaster-Carr

Filter by

Color

Container Type

For Use On

Consistency

Begins to Harden

Formulation

Container Size

Mixing Required

Clarity

Reaches Full Strength

Maximum Temperature

For Use Outdoors

Minimum Temperature

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

REACH

RoHS

Mix Ratio

Process After Hardening

Approximate Coverage @ Thickness

12 Products

Surface Fillers for Vinyl Fabric

Mend rips, tears, and holes on vinyl surfaces, such as awnings and upholstery, with these flexible, waterproof surface fillers. They cannot be sold to regions outside the United States due to product labeling requirements.

Container
Size, fl. oz.	Type	Consistency	Begins to Harden, min.	Reaches Full Strength, hrs.	Temp. Range, °F	Color	For Use Outdoors	For Use On	Cannot Be Sold To		Each
1	Tube	Thin Liquid	30	4	-10° to 200°	Clear	Yes	Vinyl Fabric	Outside United States	0000000	00000

Surface Filler Patches

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Surface Fillers
Lg.	Wd.	Begins to Harden, min.	Reaches Full Strength	Mix Ratio	For Use Outdoors	Temp. Range, ° F	Color	Finishing Method	For Use On		Each
4"	6"	1	30 min.	1:1	Yes	Not Rated to 425°	Clear	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	000000

Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Paste fillers resist alkalies, solvents, gasoline, and oil.

Container
Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
2	Tube	5	60 min.	Paste	1:1	12 sq. in. @ 1/4"	1/2"	Not Rated to 200°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	000000
2	Jar, Bottle	20	24 hrs.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
2	Jar, Bottle	20	24 hrs.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
14	Can, Jar	20	24 hrs.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
14	Can, Jar	20	24 hrs.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000

Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.

Container
Size, pt.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
1.5	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	000000
3	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	00000

Surface Fillers for Plastic

Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.

Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.

	Container
Mfr. Model No.	Net Weight	Type	Begins to Harden	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Devcon Flexane 80 Putty
15820	1 lbs.	Can	20 min.	7 days	Putty	2.6:1	90 sq. in. @ 1/4"	-40° to 180°	Black	Sand	Vinyl Plastic, EPDM Rubber, SBR Rubber	00000000	0000000

Shoe and Boot Protective Epoxy Coatings

Extend the life of your footwear with these abrasion- and water-resistant epoxies. Stronger and more durable than most footwear materials, these epoxies are often used to coat and repair high-wear areas prone to rips, cracks, and water exposure, such as safety toes. They permanently bond to leather, plastic, and rubber. Each cartridge includes enough epoxy to coat the toes on one pair of shoes or boots. They fully harden in 24 hours and dry with a gloss finish, which can be rubbed away for a matte finish.

Material	Clarity	Consistency	Container Size, fl. oz.	Begins to Harden	Reaches Full Strength	Mixing Required	Mix Ratio	For Use On	Includes	Choose a Color		Each
Polyurethane Epoxy	Opaque	Gel	1.69	90 sec.	24 hrs.	Yes	1:1	Leather, Plastic, Rubber	Three Mixer Nozzles, Plunger, Applicator, Sandpaper	Beige, Black, Brown	000000	000000

Footwear Repair Adhesives

Repair rips, split seams, and detached soles to stop leaks in shoes, boots, and waders. These polyurethane adhesives create a strong, flexible seal that keeps water out, so they’re also used to coat seams. Use on leather, plastic, and rubber. They fully harden in 10 hours and dry clear.

Material	Color	Clarity	Consistency	Container Size, fl. oz.	Container Type	Begins to Harden	Reaches Full Strength	Mixing Required		Each
Polyurethane Epoxy	Clear	Clear	Thick Liquid	0.75	Tube	60 min.	10 hrs.	No	0000000	00000