Get NEMA 4 and IP66 protection from dirt and water. Switch is rated for hazardous locations for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G. If vibration or shock exceeds a set activation point, the contacts actuate to either shut down your machine or activate an alarm. Reset the switch with the push of a button. The activation point is adjustable between 0 to 5 gravity units (g) at 0 to 60 Hz.

These monitors are constructed entirely of stainless steel for excellent corrosion resistance and are IP68 and IP69K rated for protection from temporary submersion and high-pressure washdowns. Connect to your data collector or programmable logic controller to monitor vibration. The 4-pole micro M12 plug connects to the included cable and socket to quickly connect and disconnect it.

To view wiring diagrams, select a part number and click Product Detail.

Use an optional magnetic base for temporary mounting or a glue-on base for more permanent mounting.

Two easy-to-set dials allow you to adjust a set activation point for vibration as well as a time delay to avoid false triggering from start-up vibration. An LED alarm signals if the set activation point is exceeded. Plug the included cable into your data collector or programmable logic controller. IP67 rated for protection from dust and temporary submersion.

Use an optional magnetic base for temporary mounting or a glue-on base for more permanent mounting.

A built-in display makes it easy to view vibration levels, warnings, and the status of these switches. Use the push-buttons to set and adjust activation points for vibration as well as a start delay to avoid false triggering from start-up vibration. Memory storage captures readings at regular intervals, which lets you analyze your process. These switches have a 5-pole M12 plug that connects to cables with a socket (sold separately), so you can quickly connect and disconnect them. They are IP67 rated for protection from dust and brief submersion. Switches meet American, Canadian, and European safety standards. They also meet ISO standards for vibration monitoring.

Use Nano M8/USB adapter cords to connect these switches to your computer.

Use a magnetic base for temporary mounting or a glue-on base for more permanent mounting.

For technical drawings and 3-D models, click on a part number.

Gauge your machine’s health with more precision than vibration monitors. These sensors measure acceleration, vibration, and frequency. Mount them to motors, fans, and gearboxes. Made entirely of stainless steel, they stand up to prolonged exposure to water and mild chemicals. These sensors use the IEPE communication protocol, so you can connect them to a vibration controller or edge device.

Three-axis sensors pick up motion in three directions—up and down, side to side, and back and forth—for a more comprehensive assessment than single-axis sensors.

All of these sensors are IP67 rated to block out dust and water if briefly submerged. IP68 and IP69K rated sensors also stand up to spraying water during high-pressure washdowns.

For technical drawings and 3-D models, click on a part number.

Mount these sensors to robot arms, cranes, and vehicles to accurately track their movements. Also known as inertial measurement units (IMUs), they hold sensors for altitude, angular velocity (rotation speed), and acceleration in a housing about the size of a hockey puck. As your machine moves, these sensors send data to vehicle systems and computers in real time using SAE J1939 protocols. They can trigger on-board safety systems, which alert operators to dangerous conditions, adjust a vehicle’s path to avoid accidents, and keep machines working in safe zones. Use these sensors right out of the box with the standard settings or customize them for specific applications with the included software. They’re rated IP67 and IP69K to hold up to dirty, dusty environments and washdowns with hot, high-pressure water.

For technical drawings and 3-D models, click on a part number.