Filter by
Mount Type
Capacity per Mount
Overall Height
Mounting Hole Center-to-Center
Shear Capacity per Mount
Hardness
Hardness Rating
Diameter
Base Width
Base Material
Mounting Hole Diameter
Deflection @ Capacity
Base Length
Export Control Classification Number (ECCN)
DFARS Specialty Metals
About Vibration-Damping Mounts
Choose the right vibration-damping mounts to protect equipment from damage and reduce noise.
Vibration-Damping Bolt-Down Mounts
 |  |  |  |
Threaded-Insert Mount, Style 1 | Threaded-Insert Mount Style 2 | Threaded-Insert Mount, Style 3 | Threaded-Insert Mount, Style 4 |
 |  |  |  |
Threaded-Insert Mount Style 5 | Threaded-Insert Mount Style 6 | Threaded-Insert Mount, Style 7 | Unthreaded-Hole Mount, Style 8 |
 |  |  | |
Unthreaded-Hole Mount, Style 9 | Unthreaded-Hole Mount, Style 10 | Unthreaded-Hole Mount, Style 11 |
These mounts reduce vibration and noise while anchoring machinery from below. Bolt them to the bases of fans, pumps, and generators so vibration from moving components doesn't wear out parts, crack floors, and push equipment out of place.
Multipurpose Neoprene with Threaded-Insert Mount
| |
Style 1 | Style 2 |
| |
Style 3 | Style 4 |
| |
Style 5 | Style 6 |
| |
Style 7 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Style 1—The economical choice, these mounts absorb enough shock and vibration for most machinery.
Style 2—If you can't drill bolt holes into your equipment or floor, use these ribbed, antislip mounts without fasteners.
Styles 3 and 5—The arched construction dissipates the heavy thuds of punch presses and other high-impact machinery.
Style 4—Offset slow, rumbling vibrations, such as those caused by vehicles and large machinery. These mounts compress (deflect) at two separate points to absorb low-frequency vibration better than mounts that only deflect in one place.
Style 6—In addition to high load capacities, the wide, rigid mounting surface minimizes leaning and wobbling.
Style 7—Built to absorb vibration and support weight when installed at any angle, these mounts withstand both head-on force (Cap. per Mount) and force from the side (Shear Cap. per Mount).
Base | Mounting | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount, lb. | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | |||
| 1 | 5/16"-18 | 50 | 0.12" | Not Rated | Not Rated | 1" | 1.2" | 3.13" | 1.75" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 00000 | ||
| 1 | 5/16"-18 | 80 | 0.12" | Not Rated | Not Rated | 1" | 1.2" | 3.13" | 1.75" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 0000 | ||
| 1 | 5/16"-18 | 110 | 0.12" | Not Rated | Not Rated | 1" | 1.2" | 3.13" | 1.75" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 0000 | ||
| 1 | 5/16"-18 | 160 | 0.12" | Not Rated | Not Rated | 1" | 1.2" | 3.13" | 1.75" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 0000 | ||
| 1 | 3/8"-16 | 130 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 3/8"-16 | 250 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 3/8"-16 | 350 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 3/8"-16 | 480 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 1/2"-20 | 130 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 1/2"-20 | 250 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 1/2"-20 | 350 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 1/2"-20 | 480 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 2 | 1/2"-13 | 1,500 | 0.25" | Not Rated | Not Rated | 1.63" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 1,500 | 0.5" | Not Rated | Not Rated | 2.75" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 2,250 | 0.25" | Not Rated | Not Rated | 1.63" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 2,250 | 0.5" | Not Rated | Not Rated | 2.75" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 3,000 | 0.25" | Not Rated | Not Rated | 1.63" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 3,000 | 0.5" | Not Rated | Not Rated | 2.75" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 4,000 | 0.25" | Not Rated | Not Rated | 1.63" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 4,000 | 0.5" | Not Rated | Not Rated | 2.75" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 60 | 0.2" | Not Rated | Not Rated | 1.5" | 1.53" | 4.41" | 2" | -20 to 180 | No | 2 | 0.41" | 3.75" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 100 | 0.2" | Not Rated | Not Rated | 1.5" | 1.53" | 4.41" | 2" | -20 to 180 | No | 2 | 0.41" | 3.75" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 130 | 0.2" | Not Rated | Not Rated | 1.5" | 1.53" | 4.41" | 2" | -20 to 180 | No | 2 | 0.41" | 3.75" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 200 | 0.2" | Not Rated | Not Rated | 1.5" | 1.53" | 4.41" | 4" | -20 to 180 | No | 2 | 0.41" | 3.75" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 260 | 0.2" | Not Rated | Not Rated | 1.5" | 1.53" | 4.41" | 4" | -20 to 180 | No | 2 | 0.41" | 3.75" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 700 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 1,000 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 4 | 5/16"-18 | 45 | 0.35" | Not Rated | Not Rated | 1.5" | 1.19" | 3.19" | 1.63" | -20 to 225 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 00000 | ||
| 4 | 5/16"-18 | 75 | 0.35" | Not Rated | Not Rated | 1.5" | 1.19" | 3.19" | 1.63" | -20 to 225 | No | 2 | 0.34" | 2.38" | Steel | 0000000 | 00000 | ||
| 4 | 5/16"-18 | 125 | 0.35" | Not Rated | Not Rated | 1.5" | 1.19" | 3.19" | 1.63" | -20 to 225 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 00000 | ||
| 4 | 3/8"-16 | 150 | 0.4" | Not Rated | Not Rated | 1.88" | 1.75" | 3.88" | 2.31" | -20 to 225 | No | 2 | 0.34" | 3" | Steel | 0000000 | 00000 | ||
| 4 | 3/8"-16 | 380 | 0.4" | Not Rated | Not Rated | 1.88" | 1.75" | 3.88" | 2.31" | -20 to 225 | No | 2 | 0.34" | 3" | Steel | 0000000 | 00000 | ||
| 4 | 3/8"-16 | 600 | 0.4" | Not Rated | Not Rated | 1.88" | 1.75" | 3.88" | 2.31" | -20 to 225 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 4 | 1/2"-13 | 600 | 0.5" | Not Rated | Not Rated | 2.75" | 2.56" | 5.5" | 3.31" | -20 to 225 | No | 2 | 0.56" | 4.13" | Steel | 00000000 | 00000 | ||
| 4 | 1/2"-13 | 1,000 | 0.5" | Not Rated | Not Rated | 2.75" | 2.56" | 5.5" | 3.31" | -20 to 225 | No | 2 | 0.56" | 4.13" | Steel | 00000000 | 00000 | ||
| 4 | 1/2"-13 | 2,100 | 0.5" | Not Rated | Not Rated | 2.75" | 3.38" | 6.25" | 4" | -20 to 225 | No | 2 | 0.56" | 5" | Steel | 00000000 | 00000 | ||
| 4 | 1/2"-13 | 4,300 | 0.5" | Not Rated | Not Rated | 2.75" | 3.38" | 6.75" | 4.38" | -20 to 225 | No | 2 | 0.56" | 5.5" | Steel | 00000000 | 00000 | ||
| 5 | 5/8"-11 | 1,500 | 0.03" | Not Rated | Not Rated | 1.19" | 4" | 7" | 2.5" | 0 to 180 | No | 2 | 0.66" | 5.5" | Steel | 00000000 | 000000 | ||
| 5 | 5/8"-11 | 3,000 | 0.03" | Not Rated | Not Rated | 1.19" | 4" | 7" | 4" | 0 to 180 | No | 2 | 0.66" | 5.5" | Steel | 00000000 | 000000 | ||
| 6 | 1/2"-13 | 1,500 | 0.19" | Not Rated | Not Rated | 1.61" | 5.31" | 7.25" | 3" | -20 to 180 | No | 2 | 0.44" | 6.25" | Steel | 000000000 | 000000 | ||
| 6 | 1/2"-13 | 1,500 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | 1/2"-13 | 2,000 | 0.19" | Not Rated | Not Rated | 1.61" | 5.31" | 7.25" | 3" | -20 to 180 | No | 2 | 0.44" | 6.25" | Steel | 000000000 | 000000 | ||
| 6 | 1/2"-13 | 2,500 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | 1/2"-13 | 3,000 | 0.19" | Not Rated | Not Rated | 1.61" | 5.31" | 7.25" | 3" | -20 to 180 | No | 2 | 0.44" | 6.25" | Steel | 000000000 | 000000 | ||
| 6 | 1/2"-13 | 4,400 | 0.19" | Not Rated | Not Rated | 1.61" | 5.31" | 7.25" | 3" | -20 to 180 | No | 2 | 0.44" | 6.25" | Steel | 000000000 | 000000 | ||
| 6 | 3/4"-10 | 700 | 0.25" | Not Rated | Not Rated | 1.5" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | 3/4"-10 | 1,000 | 0.25" | Not Rated | Not Rated | 1.5" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | 3/4"-10 | 1,500 | 0.25" | Not Rated | Not Rated | 1.5" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | M12 × 1.75 mm | 700 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | M12 × 1.75 mm | 1,000 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | M12 × 1.75 mm | 1,500 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | M12 × 1.75 mm | 2,500 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 7 | 1/4"-20 | 14 | 0.01" | 14 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | -20 to 180 | No | 4 | 0.2" | 1.938" | Steel | 00000000 | 00000 | ||
| 7 | 1/4"-20 | 24 | 0.01" | 24 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | -20 to 180 | No | 4 | 0.2" | 1.938" | Steel | 00000000 | 00000 | ||
| 7 | 1/4"-20 | 60 | 0.01" | 60 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | -20 to 180 | No | 4 | 0.2" | 1.938" | Steel | 00000000 | 00000 | ||
| 7 | 3/8"-16 | 50 | 0.01" | 50 | 0.01" | 1.5" | 3" | 3" | 3" | -20 to 180 | No | 4 | 0.27" | 2.5" | Steel | 00000000 | 00000 | ||
| 7 | 3/8"-16 | 110 | 0.01" | 110 | 0.01" | 1.5" | 3" | 3" | 3" | -20 to 180 | No | 4 | 0.27" | 2.5" | Steel | 00000000 | 00000 | ||
High-Temperature Silicone Rubber with Threaded-Insert Mount
|
Style 1 |
These mounts handle temperatures about twice as high as natural rubber and neoprene. Use them to reduce vibration on and around ovens, kilns, and other heat-generating equipment.
Style 1—The economical choice, these mounts absorb enough shock and vibration for most machinery.
Base | Mounting | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | |||
| 1 | 5/16"-18 | 35 | 0.2" | Not Rated | Not Rated | 1" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 000000 | ||
| 1 | 5/16"-18 | 35 | 0.4" | Not Rated | Not Rated | 1.25" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 45 | 0.2" | Not Rated | Not Rated | 1" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 45 | 0.4" | Not Rated | Not Rated | 1.25" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 70 | 0.2" | Not Rated | Not Rated | 1" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 70 | 0.4" | Not Rated | Not Rated | 1.25" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 120 | 0.2" | Not Rated | Not Rated | 1" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 120 | 0.4" | Not Rated | Not Rated | 1.25" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 135 | 0.25" | Not Rated | Not Rated | 1.25" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 135 | 0.5" | Not Rated | Not Rated | 1.75" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 170 | 0.25" | Not Rated | Not Rated | 1.25" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 170 | 0.5" | Not Rated | Not Rated | 1.75" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 240 | 0.25" | Not Rated | Not Rated | 1.25" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 240 | 0.5" | Not Rated | Not Rated | 1.75" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 380 | 0.25" | Not Rated | Not Rated | 1.25" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 380 | 0.5" | Not Rated | Not Rated | 1.75" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 550 | 0.25" | Not Rated | Not Rated | 1.25" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 550 | 0.5" | Not Rated | Not Rated | 1.75" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 250 | 0.25" | Not Rated | Not Rated | 1.75" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 250 | 0.5" | Not Rated | Not Rated | 2.88" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 525 | 0.25" | Not Rated | Not Rated | 1.75" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 525 | 0.5" | Not Rated | Not Rated | 2.88" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 750 | 0.25" | Not Rated | Not Rated | 1.75" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 750 | 0.5" | Not Rated | Not Rated | 2.88" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 1,100 | 0.25" | Not Rated | Not Rated | 1.75" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 1,100 | 0.5" | Not Rated | Not Rated | 2.88" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
Natural Rubber with Unthreaded-Hole Mount
|
Style 8 |
|
Style 9 |
These mounts don’t scuff or tear easily, and they stay strong and flexible at subfreezing temperatures.
Styles 8 and 9—Our low-profile options block vibration around wiring, circuit boards, and other components installed in narrow gaps. Install a washer (sold separately) to support equipment and avoid costly downtime if the rubber fails.
Aluminum Base—Won't weaken and rust as quickly as steel when exposed to moisture and chemicals.
Vibration-Damping Mounts | Washers | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Base | Mounting | |||||||||||||||||||||
Style | Hole Dia. | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Thk. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | Each | ||||
| 8 | 0.166" | 2 | 0.06" | Not Rated | Not Rated | 0.78" | 1" | 1.69" | 1.69" | 0.025" | 0 to 170 | No | 4 | 0.141" | 1.375" | Aluminum | 0000000 | 000000 | 0000000 | 00000 | ||
| 8 | 0.166" | 4 | 0.06" | Not Rated | Not Rated | 0.78" | 1" | 1.69" | 1.69" | 0.025" | 0 to 170 | No | 4 | 0.141" | 1.375" | Aluminum | 0000000 | 00000 | 0000000 | 0000 | ||
| 8 | 0.166" | 8 | 0.06" | Not Rated | Not Rated | 0.5" | 1" | 1.25" | 1.25" | 0.032" | 0 to 170 | No | 4 | 0.141" | 1" | Aluminum | 0000000 | 00000 | 0000000 | 0000 | ||
| 8 | 0.166" | 8 | 0.06" | Not Rated | Not Rated | 0.81" | 1" | 1.69" | 1.69" | 0.025" | 0 to 170 | No | 4 | 0.141" | 1.375" | Aluminum | 0000000 | 00000 | 0000000 | 0000 | ||
| 8 | 0.257" | 30 | 0.06" | Not Rated | Not Rated | 1.41" | 1.5" | 2.38" | 2.38" | 0.032" | 0 to 170 | No | 4 | 0.196" | 1.938" | Steel | 0000000 | 00000 | 0000000 | 0000 | ||
| 8 | 0.391" | 45 | 0.06" | Not Rated | Not Rated | 1.56" | 2" | 3" | 3" | 0.032" | 0 to 170 | No | 4 | 0.257" | 2.5" | Steel | 0000000 | 00000 | 0000000 | 0000 | ||
| 9 | 0.257" | 30 | 0.06" | Not Rated | Not Rated | 1.12" | 1.5" | 1.75" | 1.75" | 0.05" | 0 to 170 | No | 4 | 0.166" | 1.375" | Steel | 0000000 | 00000 | 0000000 | 0000 | ||
| 9 | 0.391" | 90 | 0.06" | Not Rated | Not Rated | 1.81" | 2" | 2.25" | 2.25" | 0.062" | 0 to 170 | No | 4 | 0.196" | 1.75" | Steel | 0000000 | 00000 | 0000000 | 0000 | ||
Multipurpose Neoprene with Unthreaded-Hole Mount
|
Style 10 |
|
Style 11 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Style 10—Our low-profile options block vibration around wiring, circuit boards, and other components installed in narrow gaps. Install a washer (sold separately) to support equipment and avoid costly downtime if the rubber fails.
Style 11—Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.
Aluminum Base—Won't weaken and rust as quickly as steel when exposed to moisture and chemicals.
Vibration-Damping Mounts | Washers | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Base | Mounting | |||||||||||||||||||||
Style | Hole Dia. | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Thk. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | Each | ||||
| 10 | 0.166" | 2 | 0.06" | Not Rated | Not Rated | 0.41" | 1" | 1.25" | 1.25" | 0.032" | -20 to 180 | No | 4 | 0.141" | 1" | Steel | 0000000 | 00000 | 0000000 | 00000 | ||
| 10 | 0.166" | 4 | 0.06" | Not Rated | Not Rated | 0.41" | 1" | 1.25" | 1.25" | 0.032" | -20 to 180 | No | 4 | 0.166" | 1" | Steel | 0000000 | 0000 | 0000000 | 0000 | ||
| 10 | 0.257" | 12 | 0.09" | Not Rated | Not Rated | 0.63" | 1.5" | 1.75" | 1.75" | 0.05" | -20 to 180 | No | 4 | 0.169" | 1.375" | Steel | 000000 | 0000 | 0000000 | 0000 | ||
| 10 | 0.391" | 20 | 0.185" | Not Rated | Not Rated | 1.06" | 2" | 2.25" | 2.25" | 0.062" | -20 to 180 | No | 4 | 0.196" | 1.75" | Steel | 0000000 | 0000 | 0000000 | 0000 | ||
| 10 | 0.391" | 45 | 0.185" | Not Rated | Not Rated | 1.06" | 2" | 2.25" | 2.25" | 0.062" | -20 to 180 | No | 4 | 0.196" | 1.75" | Steel | 0000000 | 0000 | 0000000 | 0000 | ||
| 11 | 0.26" | 4 | 0.12" | Not Rated | Not Rated | 0.75" | 0.9" | 1.68" | 1.25" | — | -20 to 180 | No | 2 | 0.17" | 1.41" | Aluminum | 0000000 | 0000 | ——— | 0 | ||
| 11 | 0.26" | 6.5 | 0.12" | Not Rated | Not Rated | 0.75" | 0.9" | 1.68" | 1.25" | — | -20 to 180 | No | 2 | 0.17" | 1.41" | Aluminum | 00000000 | 0000 | ——— | 0 | ||
| 11 | 0.26" | 11 | 0.12" | Not Rated | Not Rated | 0.75" | 0.9" | 1.68" | 1.25" | — | -20 to 180 | No | 2 | 0.17" | 1.41" | Aluminum | 00000000 | 0000 | ——— | 0 | ||
| 11 | 0.26" | 15 | 0.12" | Not Rated | Not Rated | 0.75" | 0.9" | 1.68" | 1.25" | — | -20 to 180 | No | 2 | 0.17" | 1.41" | Aluminum | 00000000 | 0000 | ——— | 0 | ||
| 11 | 0.26" | 18 | 0.12" | Not Rated | Not Rated | 0.75" | 0.9" | 1.68" | 1.25" | — | -20 to 180 | No | 2 | 0.17" | 1.41" | Aluminum | 00000000 | 0000 | ——— | 0 | ||
Fail-Safe Vibration-Damping Bolt-Down Mounts
Avoid the cost and hassle of a mount suddenly giving out. Even if the rubber fails, the interlocking steel body holds up to minimize downtime while you find a replacement. These mounts absorb shock and vibration to extend the life of heavy machinery and prevent cracking in nearby equipment, floors, and walls.
Multipurpose Neoprene with Threaded-Insert Mount
 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Base | Mounting | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | |||
| 1/4"-20 | 46 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 00000 | ||
| 1/4"-20 | 87 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| 1/4"-20 | 115 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| 1/4"-20 | 137 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| 5/16"-18 | 85 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| 5/16"-18 | 170 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| 5/16"-18 | 250 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| 5/16"-18 | 340 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| 3/8"-16 | 210 | 0.1" | Not Rated | Not Rated | 1.12" | 1.78" | 3.75" | 2.27" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| 3/8"-16 | 210 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 0000000 | 00000 | ||
| 3/8"-16 | 360 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 3/8"-16 | 370 | 0.1" | Not Rated | Not Rated | 1.12" | 1.78" | 3.75" | 2.27" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| 3/8"-16 | 520 | 0.1" | Not Rated | Not Rated | 1.12" | 1.78" | 3.75" | 2.27" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| 3/8"-16 | 520 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 3/8"-16 | 680 | 0.1" | Not Rated | Not Rated | 1.12" | 1.78" | 3.75" | 2.27" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| 3/8"-16 | 680 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 3/8"-16 | 750 | 0.08" | Not Rated | Not Rated | 1.12" | 1.78" | 3.75" | 2.27" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| 1/2"-13 | 471 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| 1/2"-13 | 713 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| 1/2"-13 | 940 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| 1/2"-13 | 1,064 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 900 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 1,106 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 1,630 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 2,270 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 2,500 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 3,520 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 4,124 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 6,600 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 000000000 | 00000 | ||
| M6 × 1 mm | 46 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| M6 × 1 mm | 87 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| M6 × 1 mm | 115 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| M6 × 1 mm | 137 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| M8 × 1.25 mm | 85 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| M8 × 1.25 mm | 170 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| M8 × 1.25 mm | 210 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| M8 × 1.25 mm | 250 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| M8 × 1.25 mm | 340 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| M8 × 1.25 mm | 360 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| M8 × 1.25 mm | 520 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| M8 × 1.25 mm | 680 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| M12 × 1.75 mm | 470 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| M12 × 1.75 mm | 715 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| M12 × 1.75 mm | 940 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| M12 × 1.75 mm | 1,064 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| M20 × 2.5 mm | 900 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| M20 × 2.5 mm | 1,106 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| M20 × 2.5 mm | 1,630 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| M20 × 2.5 mm | 2,500 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
Multipurpose Neoprene with Unthreaded-Hole Mount
 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Base | Mounting | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Hole Dia. | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | |||
| 0.5" | 375 | 0.13" | Not Rated | Not Rated | 1.66" | 3.25" | 5.38" | 3.25" | 10 to 180 | No | 2 | 0.53" | 4.12" | Steel | 00000000 | 000000 | ||
| 0.5" | 800 | 0.13" | Not Rated | Not Rated | 1.66" | 3.25" | 5.38" | 3.25" | 10 to 180 | No | 2 | 0.53" | 4.12" | Steel | 00000000 | 00000 | ||
| 0.5" | 925 | 0.13" | Not Rated | Not Rated | 1.66" | 3.25" | 5.38" | 3.25" | 10 to 180 | No | 2 | 0.53" | 4.12" | Steel | 00000000 | 00000 | ||
| 0.5" | 1,425 | 0.13" | Not Rated | Not Rated | 1.66" | 3.25" | 5.38" | 3.25" | 10 to 180 | No | 2 | 0.53" | 4.12" | Steel | 00000000 | 00000 | ||
| 0.625" | 525 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.625" | 1,000 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.625" | 1,250 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.625" | 1,950 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.75" | 525 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.75" | 1,000 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.75" | 1,250 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.75" | 1,950 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
Shock-Absorbing Spring Vibration-Damping Mounts
Absorb higher-intensity shocks and vibration than mounts without springs. These mounts compress (deflect) four times farther than other mounts when force is applied to protect shaking, thudding machinery and nearby equipment. They also dissipate the low, slow-moving vibrations other mounts can't handle, such as the rumbling of traffic or a large air compressor. With a durable antislip base that secures equipment without the help of fasteners, these mounts are ideal for floors you can't drill into and equipment without bolt holes.
Steel with Threaded-Insert Mount
 |
Vibration-Damping Mounts | Replacement Springs | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Base | Mounting | ||||||||||||||||||||
Thread Size | Cap. per Mount, lb. | Thread Lg. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Bolt Material | Base Material | Each | Each | ||||
| 3/8"-16 | 50 | 3" | 1" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 000000 | 0000000 | 00000 | ||
| 3/8"-16 | 100 | 3" | 1" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 0000 | ||
| 3/8"-16 | 150 | 3" | 1" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 0000 | ||
| 3/8"-16 | 250 | 3" | 0.83" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 0000 | ||
| 3/8"-16 | 370 | 3" | 0.75" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 0000 | ||
| 3/8"-16 | 520 | 3" | 0.75" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 00000 | ||
| 1/2"-13 | 675 | 3 1/2" | 1.32" | Not Rated | Not Rated | 5.25" | 7.75" | 3" | -20 to 180 | No | 2 | 0.625" | 6.5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 00000 | ||
| 1/2"-13 | 900 | 3 1/2" | 1.02" | Not Rated | Not Rated | 5.25" | 7.75" | 3" | -20 to 180 | No | 2 | 0.625" | 6.5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 00000 | ||
| 1/2"-13 | 1,200 | 3 1/2" | 0.9" | Not Rated | Not Rated | 5.25" | 7.75" | 3" | -20 to 180 | No | 2 | 0.625" | 6.5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 00000 | ||
| 1/2"-13 | 1,785 | 3 1/2" | 0.88" | Not Rated | Not Rated | 5.25" | 7.75" | 3" | -20 to 180 | No | 2 | 0.625" | 6.5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 00000 | ||
Shock-Absorbing Air Spring Vibration-Damping Mounts
Neutralize shock and vibration from your machine no matter how hard it heaves or hammers. These mounts use air pressure rather than a steel frame to support a load. That means four times the deflection and vibration control of a typical bolt-down mount. Fill them with air and stick them under heavy machinery to keep floors intact, seals tight, and fasteners secure. They’ll also soak up the vibration from floors and mounting plates that bumps optical and other precision tools out of alignment.
Multipurpose Neoprene with Threaded-Insert Mount
 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Base | Mounting | Air Inlet | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Ht. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Max. Pressure, psi | Thread Size | Thread Type | Base Material | Each | |||
| 3/8"-16 | 100 | 1" | Not Rated | Not Rated | 2.5" | 2.88" | 2" | 3" | 3" | -20 to 180 | No | 4 | 0.3" | 2.38" | 60 | 0.305"-32 | Schrader | Aluminum | 00000000 | 0000000 | ||
| 1/2"-13 | 300 | 1" | Not Rated | Not Rated | 2.45" | 4.14" | 1.91" | 4.19" | 4.19" | -20 to 180 | No | 4 | 0.3" | 3.5" | 60 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 1/2"-13 | 600 | 1.5" | Not Rated | Not Rated | 3.5" | 5" | 2.94" | 5.12" | 5.12" | -20 to 180 | No | 4 | 0.3" | 4.25" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 1/2"-13 | 1,200 | 1.5" | Not Rated | Not Rated | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | -20 to 180 | No | 4 | 0.3" | 6" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 5/8"-11 | 2,400 | 1.25" | Not Rated | Not Rated | 3.5" | 9.66" | 2.94" | 10" | 10" | -20 to 180 | No | 4 | 0.56" | 8.5" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 5/8"-11 | 4,800 | 1.5" | Not Rated | Not Rated | 3.5" | 13.31" | 2.94" | 13.5" | 13.5" | -20 to 180 | No | 4 | 0.56" | 12" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M10 × 1.5 mm | 100 | 0.5" | Not Rated | Not Rated | 2.5" | 2.89" | 1.94" | 3" | 3" | -20 to 180 | No | 4 | 0.3" | 2.38" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 00000 | ||
| M12 × 1.75 mm | 300 | 0.5" | Not Rated | Not Rated | 2.5" | 4.14" | 1.94" | 4.19" | 4.19" | -20 to 180 | No | 4 | 0.3" | 3.5" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M12 × 1.75 mm | 550 | 0.5" | Not Rated | Not Rated | 3.5" | 5" | 2.94" | 5.13" | 5.13" | -20 to 180 | No | 4 | 0.3" | 4.25" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M12 × 1.75 mm | 1,200 | 0.5" | Not Rated | Not Rated | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | -20 to 180 | No | 4 | 0.3" | 6" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M16 × 2 mm | 2,400 | 0.5" | Not Rated | Not Rated | 3.5" | 9.66" | 2.94" | 10" | 10" | -20 to 180 | No | 4 | 0.56" | 8.5" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
Seismic Vibration-Damping Mounts
Offset shock and vibration under normal conditions while preventing sheared bolts and other costly damage during an earthquake. With two rows of bolt holes and a steel covering to remain rigid and stable, these mounts withstand 1g of lateral force. Ideal for large industrial machinery, they stay rigid and strong under loads of up to 3,500 pounds.
Multipurpose Neoprene
 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Steel Base and Cadmium-Plated Steel Bolt—The cadmium adds lubricity so the bolt threads on smoothly and won’t seize or gall if you need to adjust the height of your equipment.
Base | Mounting | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Cap. per Mount, lb. | Thread Lg. | Deflection @ Cap. | Shear Cap. per Mount, lb. | Deflection @ Shear Cap. | Seismic Rating, g | Temp. Range, ° F | Overall Ht. | Lg. | Wd. | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Steel Base and Cadmium-Plated Steel Bolt | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/2"-13 | 250 | 1 1/4" | 0.15" | 200 | 0.09" | 1 | -20 to 225 | 2.3" | 4.75" | 3" | No | 6 | 0.438" | 3.875", 2" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/2"-13 | 525 | 1 1/4" | 0.15" | 420 | 0.09" | 1 | -20 to 225 | 2.3" | 4.75" | 3" | No | 6 | 0.438" | 3.875", 2" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/2"-13 | 1,000 | 1 1/4" | 0.15" | 800 | 0.09" | 1 | -20 to 225 | 2.3" | 4.75" | 3" | No | 6 | 0.438" | 3.875", 2" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 1,400 | 1 1/4" | 0.15" | 400 | 0.09" | 1 | -20 to 225 | 2.375" | 6.25" | 3.75" | No | 6 | 0.563" | 5", 2.5" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 2,100 | 1 1/4" | 0.15" | 600 | 0.09" | 1 | -20 to 225 | 2.375" | 6.25" | 3.75" | No | 6 | 0.563" | 5", 2.5" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 3,500 | 1 1/4" | 0.15" | 1,000 | 0.09" | 1 | -20 to 225 | 2.375" | 6.25" | 3.75" | No | 6 | 0.563" | 5", 2.5" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
