Locking-Collar Rivets
Also known as magna-grip lockbolts, these are the strongest rivets we offer. Consisting of a ribbed rivet and a collar (sold separately), they have the holding power to withstand excessive vibration, expansion, and contraction.
Installation requires access to both sides of the material and a locking collar rivet tool. The tool pulls the rivet to the collar, clinches it in place, and clips off any excess length.
For technical drawings and 3-D models, click on a part number.
Rivets | Collars | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs.  | Material | Pkg. Qty. | Pkg. | Flange Dia. | Flange Ht. | Pkg. Qty. | Pkg. | ||
3/16" Dia. | ||||||||||||||||
| 0.063"-0.625" | 1.875" | 0.203" | 7/32" | 0.394" | 0.125" | 1,700 | 1,400 | Zinc-Plated Steel | 10 | 000000000 | 00000 | 0.385" | 0.052" | 10 | 000000000 | 00000 |
| 0.313"-1.25" | 2.75" | 0.203" | 7/32" | 0.394" | 0.125" | 1,700 | 1,400 | Zinc-Plated Steel | 10 | 000000000 | 0000 | 0.385" | 0.052" | 10 | 000000000 | 0000 |
1/4" Dia. | ||||||||||||||||
| 0.063"-0.625" | 2" | 0.265" | K | 0.525" | 0.152" | 2,200 | 2,550 | Zinc-Plated Steel | 10 | 000000000 | 0000 | 0.525" | 0.07" | 10 | 000000000 | 0000 |
| 0.313"-1.25" | 2.625" | 0.265" | K | 0.525" | 0.152" | 2,200 | 2,550 | Zinc-Plated Steel | 10 | 000000000 | 0000 | 0.525" | 0.07" | 10 | 000000000 | 0000 |
Air Inlet | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pull Capacity, lbs. | Stroke Lg. | Operating Air Pressure, psi | Average Air Consumption, cfm | Pipe Size | Gender | Air Hose Included | Each | |
| 5,200 | 5/8" | 90-100 | 1.5 | 1/4 | Female | No | 000000000 | 000000000 |
Steel Hex-Drive Rivets
Also known as fab-lock fasteners, these rivets consist of a sleeved screw with hex-washer head. The sleeve fans out when installed to resist vibration, expansion, and contraction.
Rivets install with a wrench and socket and require access to only one side of the material. For faster installation, use the tool for hex-drive rivets with an adjustable torque power driver (each sold separately).
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Thread Size | Washer Dia. | Shear Strength, lbs. | Tensile Strength, lbs. | Washer Material | Sleeve Material | Pkg. Qty. | Pkg. | |
5/16" Hex Wd. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.062"-0.25" | 1.373" | 0.313" | 5/16" | 0.688" | 0.375" | 10-24 | 0.5" | 2,150 | 200 | EPDM Rubber | 5052 Aluminum | 10 | 000000000 | 000000 |
| 0.25"-0.5" | 1.612" | 0.313" | 5/16" | 0.688" | 0.375" | 10-24 | 0.5" | 2,150 | 200 | EPDM Rubber | 5052 Aluminum | 10 | 000000000 | 00000 |
| 0.5"-0.75" | 1.807" | 0.313" | 5/16" | 0.688" | 0.375" | 10-24 | 0.5" | 2,150 | 130 | EPDM Rubber | 5052 Aluminum | 5 | 000000000 | 00000 |
| Material | No. of Pieces | Includes | Each | |
| Steel | 2 | Sleeve Socket | 000000000 | 0000000 |
18-8 Stainless Steel Hex-Drive Rivets
18-8 stainless steel has good corrosion resistance. Also known as fab-lock fasteners, these rivets consist of a sleeved screw with hex-washer head. The sleeve fans out when installed to resist vibration, expansion, and contraction.
Rivets install with a wrench and socket and require access to only one side of the material. For faster installation, use the tool for hex-drive rivets with an adjustable torque power driver (each sold separately).
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Thread Size | Washer Dia. | Shear Strength, lbs. | Tensile Strength | Washer Material | Sleeve Material | Pkg. Qty. | Pkg. | |
5/16" Hex Wd. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.062"-0.25" | 1.373" | 0.313" | 5/16" | 0.688" | 0.375" | 10-24 | 0.5" | 1,950 | Not Rated | EPDM Rubber | 5052 Aluminum | 5 | 000000000 | 000000 |
| 0.25"-0.5" | 1.612" | 0.313" | 5/16" | 0.688" | 0.375" | 10-24 | 0.5" | 1,950 | Not Rated | EPDM Rubber | 5052 Aluminum | 5 | 000000000 | 00000 |
| 0.5"-0.75" | 1.807" | 0.313" | 5/16" | 0.688" | 0.375" | 10-24 | 0.5" | 1,950 | Not Rated | EPDM Rubber | 5052 Aluminum | 5 | 000000000 | 00000 |
| Material | No. of Pieces | Includes | Each | |
| Steel | 2 | Sleeve Socket | 000000000 | 0000000 |
Vibration-Resistant Captive Panel Screws
An expanding rubber bushing damps vibration while holding panels together. To install, push the threaded end through a hole in the outer panel, slide on the bushing, and tighten the nut. Next, insert the assembly through the inner panel hole and flip the handle to fasten. They become a part of the panel when installed, so they won't fall out and get lost.
For technical drawings and 3-D models, click on a part number.
For Panel Thick. | For Outer Panel Cutout | Handle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Outer | Total | Ht. | Wd. | For Inner Panel Hole Dia. | Lg. | Ht. | Material | Color | Screw Lg. | Bushing Material | Nut Material | Each | |
Zinc Alloy | |||||||||||||
| 0.01" to 0.13" | 0.26" | 0.161" | 0.13" | 0.375" | 1.09" | 0.31" | Nylon Plastic | Black | 0.52" | Rubber | Nylon Plastic | 000000000 | 00000 |
Brass | |||||||||||||
| 0.01" to 0.19" | 0.38" | 0.228" | 0.177" | 0.547" | 1.53" | 0.45" | Nylon Plastic | Black | 0.75" | Rubber | Nylon Plastic | 000000000 | 0000 |