Scissor Jacks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/295/2952t51p1-e01g-digital@halfx_637090903125937021.png?ver=imagenotfound)
Fit this compact jack under low-height loads.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4" Min. Ht. | Capacity @ 7" Ht. | Capacity @ 9" Max. Lift | Saddle | Base | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
1/8 | 250 | 1/4 | 675 | 1 1/2 | 3,000 | 4"-13" | 9" | 10 1/2" | 2" | 5 1/8" | 4 1/4" | 7 3/8" | 22" | Steel | No | 2 | 3/8" | 0000000 | 000000 |
Ratchet Jacks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/292/2925t6p1-e01g-digital@halfx_637090896242072136.png?ver=imagenotfound)
These jacks can be used to lift, spread, push, pull, and clamp. The ratcheting action raises or lowers the load one notch at a time. For clamping, turn the top plate 90° and ratchet the jack to secure your workpiece.
Note: Jacks must be loaded with at least 150 lbs. to safely lower your load one notch at a time. When loaded with less than 150 lbs., the notches are bypassed and the load will drop freely.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Base | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max., tons | Range, lbs. | Max. Clamping Force, lbs. | Ht. | Max. Lift | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Handle Material | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
1 1/4 | 150-2,500 | 750 | 4 1/2"-49 3/4" | 45 1/4" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 0000000 |
2 1/4 | 150-4,500 | 750 | 4 1/2"-38 5/8" | 34 1/8" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 000000 |
Two-Height Ratchet Jacks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/295/2954t3p1-e01g-digital@halfx_637090912792635192.png?ver=imagenotfound)
Choose between two lifting points—use the toe for lifting loads low to the ground, or use the saddle when you need a higher, more stable lifting point. The saddle is curved to cradle curved loads. Jacks have a ratcheting action that raises or lowers the load one notch at a time. A removable handle can be used at two different positions to get the best angle for lifting.
Aluminum jacks are lighter than iron for easier portability.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Movement | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Handle Material | Each | |
Iron | |||||||||||||||
5 | 10,000 | 7" | 1 3/4"-8 3/4" | 2 1/2" | 1 1/8" | 14"-21" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 000000000 |
5 | 10,000 | 10" | 1 3/4"-11 3/4" | 2 1/2" | 1 1/8" | 17"-27" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
5 | 10,000 | 13" | 1 3/4"-14 3/4" | 2 1/2" | 1 1/8" | 20"-33" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
10 | 20,000 | 9 1/2" | 1 5/8"-11 1/8" | 2 3/8" | 1 1/8" | 17 1/4"-26 3/4" | Rigid | 2 5/8" | 2 7/8" | 8 3/4" | 6" | 60" | Steel | 0000000 | 00000000 |
10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21 5/8"-33 5/8" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
15 | 30,000 | 12 3/4" | 2 1/4"-15" | 2 5/8" | 2 1/4" | 23 1/4"-36" | Rigid | 2 7/8" | 3 1/2" | 10 1/4" | 8" | 70" | Steel | 0000000 | 00000000 |
15 | 30,000 | 18" | 2 1/4"-20 1/4" | 2 5/8" | 2 1/4" | 28"-46" | Rigid | 2 7/8" | 3 1/2" | 11" | 8" | 70" | Steel | 0000000 | 00000000 |
Aluminum | |||||||||||||||
10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21 5/8"-33 5/8" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
Hydraulic Jacks with Wheels
![](/prerenderstable/mvPRE/contents/gfx/imagecache/290/2906t45_390ab5b0-aa60-4476-a29f-15c6e6962e39@halfx_638114008266813124.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/290/2908t11-@halfx_637115892649314142.png?ver=imagenotfound)
Roll these jacks from job to job and under hard-to-reach places.
Bracket saddles provide a more secure hold and offer higher lifts than flat saddles. Designed to help mechanics perform maintenance and repair tasks on automotive transmissions, they swivel forward, backward, and side to side, to allow for easy access to all areas of your load.
Flat saddles hold larger loads than the bracket saddles and have a longer handle for more comfortable lifting.
Note: Jacks should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | Base | Wheel | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Ht. | Max. Lift | Movement | Dia. | Lg. | Wd. | Wd. | Lg. | Ht. | Handle Lg. | Body Material | Configuration | Material | Each | |
Bracket Saddle | ||||||||||||||||
1/2 | 1,000 | 8 1/2"-24 3/4" | 16 1/4" | Swivel | __ | 17" | 9 3/8" | 15" | 31" | 6 1/4" | 22 1/2" | Steel | Four Swivel Casters | Steel | 0000000 | 0000000 |
1 | 2,000 | 7 3/4"-33" | 25 1/4" | Swivel | __ | 17" | 15 1/2" | 18 1/2" | 40 1/2" | 7 1/2" | 22 1/2" | Steel | Four Swivel Casters | Steel | 0000000 | 000000 |
Flat Saddle | ||||||||||||||||
2 | 4,000 | 3 1/2"-18 1/2" | 15" | Rigid | 4 1/2" | __ | __ | 11 3/4" | 25 3/4" | 6" | 45" | Aluminum | Two Swivel and Two Rigid Casters | Steel | 0000000 | 000000 |
3 1/2 | 7,000 | 5 1/8"-21 1/2" | 22" | Swivel | 4 3/8" | __ | __ | 13 1/2" | 28 1/2" | 6 5/8" | 52 3/8" | Steel | Two Swivel and Two Rigid Casters | Cast Iron | 0000000 | 000000 |
Hydraulic Bottle Jacks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/880/8803t53p1-@halfx_637840748384833735.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/284/2840t3p2-e01g-digital@halfx_637090874484172415.png?ver=imagenotfound)
Use these versatile jacks for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Ht. | Max. Lift | Ram OD | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | ||
A | 6 | 12,000 | 8"-16" | 8" | 1" | 4 1/2" | 4 3/4" | 12" | Steel | Removable Handle | 0000000 | 000000 |
B | 6 | 12,000 | 8 1/2"-20 1/2" | 12" | 1 3/4" | 4 3/4" | 5 1/4" | 27 5/8" | Steel | Removable Handle | 000000 | 000000 |
B | 13 | 26,000 | 9 1/8"-22 1/2" | 13 3/8" | 1 7/8" | 7" | 7 3/8" | 27 5/8" | Steel | Removable Handle | 000000 | 000000 |
Low-Profile Hydraulic Bottle Jacks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/297/2976t13c1-e01g-digital-master1573511457-p9@halfx_637090914767531654.png?ver=imagenotfound)
These jacks have a short body to fit in low-clearance spaces. Jacks with a low-profile handle pump from side to side, requiring less vertical space than other bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Height | Maximum Lift | Ram OD | Dia. | Lg. | Wd. | Handle Length | Body Material | Features | Each | |
5 | 10,000 | 2 1/2"-3 1/4" | 3/4" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 0000000 |
5 | 10,000 | 3 1/2"-5" | 1 1/2" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
10 | 20,000 | 4 3/4"-6" | 1 3/16" | 1 5/8" | 4 3/8" | __ | __ | 17 3/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
30 | 60,000 | 7 1/4"-10 1/4" | 3 1/8" | 2 3/8" | __ | 7 5/8" | 5 5/8" | 39 3/8" | Steel | Removable Handle | 0000000 | 000000 |
Foot-Operated Tall-Body Hydraulic Bottle Jacks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/283/2831t63p1-e01g-digitall@halfx_637091532132306369.png?ver=imagenotfound)
Jacks are equipped with two foot pedals for hands-free use, one to raise the ram and another to lower it. Twice as tall as standard jacks, they save you time pumping. Use them for lifting, spreading, bending, pushing, and straightening.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Hand-Operated Tall-Body Hydraulic Bottle Jacks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/292/2923t65p3-@halfx_637109549068666594.png?ver=imagenotfound)
Save time pumping with jacks that are twice as tall as standard bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. Secure equipment to the ram through a mounting hole on the ram’s tip.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Ht. | Max. Lift | Ram OD | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Features | Each | |
1 1/2 | 3,000 | 25 5/8"-43 5/8" | 18" | 7/8" | 4 1/2" | 5 7/8" | 20" | Steel | __ | __ | __ | Removable Handle | 0000000 | 0000000 |
3 | 6,000 | 20 3/8"-35 1/2" | 15 1/8" | 1 3/16" | 4 3/8" | 5 7/8" | 20" | Steel | No | 2 | 5/16" | Removable Handle | 0000000 | 000000 |
5 | 10,000 | 20 1/8"-36 5/8" | 16 1/2" | 1 3/8" | 4 5/8" | 6 1/4" | 20" | Steel | No | 2 | 3/8" | Removable Handle | 0000000 | 000000 |
8 | 16,000 | 30 7/8"-53 3/4" | 22 7/8" | 1 5/8" | 5 1/8" | 6 1/2" | 20" | Steel | __ | __ | __ | Removable Handle | 0000000 | 000000 |
Heavy Duty Hydraulic Bottle Jacks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/291/2912t15p2-e01g-digital@halfx_637090877855707471.png?ver=imagenotfound)
With fewer moving parts than standard bottle jacks, these are made for frequent use. The ram body screws onto the base so that it can be opened for inspection and repair. The ram is nickel-plated for corrosion resistance. Jacks can be used for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Ht. | Max. Lift | Ram OD | Wd. | Lg. | Handle Lg. | Body Material | Features | Each | |
3 | 6,000 | 8 1/2"-17 3/8" | 8 1/2" | 7/8" | 4 1/2" | 5 7/8" | 21" | Steel | Removable Handle | 0000000 | 0000000 |
3 | 6,000 | 10 1/4"-20 1/2" | 10 1/4" | 1 1/4" | 4 1/4" | 5 7/8" | 21" | Steel | Removable Handle | 0000000 | 000000 |
5 | 10,000 | 8 5/8"-17 5/8" | 9" | 1 1/4" | 4 3/4" | 6 1/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
5 | 10,000 | 10 1/4"-22" | 11 3/4" | 1 3/8" | 4 5/8" | 6 1/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
8 | 16,000 | 9 1/8"-19 1/2" | 10 1/8" | 1 3/8" | 5 1/4" | 6 1/2" | 21" | Steel | Removable Handle | 0000000 | 000000 |
8 | 16,000 | 11"-23 1/2" | 12 1/2" | 1 5/8" | 5 1/8" | 6 1/2" | 21" | Steel | Removable Handle | 0000000 | 000000 |
20 | 40,000 | 11"-17 1/2" | 6 1/2" | 1 7/8" | 6 7/8" | 6 3/4" | 30 3/4" | Steel | Removable Handle | 0000000 | 000000 |
30 | 60,000 | 11 1/8"-18 1/8" | 7" | 2 1/8" | 7" | 5 1/2" | 30 3/4" | Steel | Removable Handle | 0000000 | 000000 |
60 | 120,000 | 12"-18 5/8" | 6 5/8" | 3 1/8" | 7 1/2" | 9 3/8" | 39 1/2" | Steel | Removable Handle | 000000 | 00000000 |
Hydraulic Jacks with Extenders and Pryers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/296/2964t2p1-@halfx_637550479961500681.png?ver=imagenotfound)
Lift in tight spaces where a bottle jack won't fit. These jacks include extensions for increasing lift height and accessories for prying. For vertical use, the pump head (where the handle meets the pump) must be pointed down.
Note: When ram extenders or accessories are used, the rated capacity is reduced by 50% for each extender and accessory connected.
Warning: Never use to support people or loads over people.
Pump | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Max. Lift | Max. Pressure, psi | Ram OD | Lg. | Wd. | Ht. | Includes | Each | |
4 tons / 8,000 lbs. Capacity | |||||||||
10 3/4"-15 5/8" | 4 7/8" | 8,000 | 1 1/2" | 12 7/8" | 5 3/4" | 5 1/8" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Five Ram Extenders (3", 6 1/8", 8 1/2", 16 1/2", and 19 1/2" lengths) Hose Male Connector Stabilizing Base Plastic Case | 000000 | 0000000 |
10 1/8"-14 7/8" | 4 3/4" | 7,000 | 2" | 14 3/4" | 4 1/2" | 5" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Pulling Accessories (Two Chains with Hooks, Chain Pull Plate, and Clamp Head) Six Ram Extenders (3", 6", and 18", and three 15" lengths) Three Ram Extender Connectors Four Locking Pins Hose Male Connector Male and Female Adapters Stabilizing Base Metal Case | 0000000 | 00000000 |
10 tons / 20,000 lbs. Capacity | |||||||||
13 3/4"-19 3/4" | 6" | 10,000 | 2 1/8" | 20 3/8" | 5 3/4" | 5 1/8" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Hose Male Connector Stabilizing Base Plastic Case Four Ram Extenders (4", 10", 18", and 27" lengths) | 000000 | 000000 |
12 3/8"-18 1/4" | 5 7/8" | 10,000 | 2 1/2" | 20" | 5 7/8" | 5 1/2" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Pulling Accessories (Two Chains with Hooks, Chain Pull Plate, and Clamp Head) Four Ram Extenders (6", 12", 15", and 18" lengths) Two Ram Extender Connectors Four Locking Pins Hose Male Connector Male and Female Adapters Stabilizing Base Metal Case | 0000000 | 00000000 |
Hydraulic Jacks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/289/2897t73-front@halfx_bk5z5_1715704112.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/289/2897t53p1-e01g-digital@halfx_637091551725310343.png?ver=imagenotfound)
Lift in tight spaces where a bottle jack won't fit. Jacks include a ram, a hand pump with hydraulic oil, a pressure gauge, and a hydraulic hose. For vertical use, the pump head (where the handle meets the pump) must be pointed down.
Rams with collar threads are threaded at the top for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).
Warning: Never use to support people or loads over people.
Capacity | Ram | Pump | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Ht. | Max. Lift | Max. Pressure, psi | OD | Collar Thread Size | Oil Capacity, cu. in. | Lg. | Wd. | Ht. | Oil Capacity, cu. in. | Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
5 | 10,000 | 1 5/8"-2 1/4" | 5/8" | 10,000 | 2 5/8" | __ | 0.6 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 000000000 |
5 | 10,000 | 4 3/8"-5 1/2" | 1 1/8" | 10,000 | 1 1/2" | 1 1/2"-16 | 1 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
5 | 10,000 | 6 5/8"-9 3/4" | 3 1/8" | 10,000 | 1 1/2" | 1 1/2"-16 | 3 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
5 | 10,000 | 8 1/2"-13 1/2" | 5" | 10,000 | 1 1/2" | 1 1/2"-16 | 5 | 13 1/4" | 3 3/4" | 5 5/8" | 20 | Aluminum | No | 2 | 1/4" | 0000000 | 00000000 |
5 | 10,000 | 8 1/2"-13 5/8" | 5 1/8" | 10,000 | 1 1/2" | 1 1/2"-16 | 5 | 14 1/4" | 5 1/8" | 5" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
5 | 10,000 | 10 3/4"-17 7/8" | 7 1/8" | 10,000 | 1 1/2" | 1 1/2"-16 | 12.6 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
10 | 20,000 | 4 3/4"-6 7/8" | 2 1/8" | 10,000 | 2 1/4" | 2 1/4"-14 | 4.8 | 21" | 4 3/4" | 7" | 55 | Aluminum | No | 2 | 1/4" | 0000000 | 00000000 |
10 | 20,000 | 4 7/8"-7" | 2 1/8" | 10,000 | 2 1/4" | 2 1/4"-14 | 4.2 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
10 | 20,000 | 9 3/4"-15 3/4" | 6" | 10,000 | 2 1/4" | 2 1/4"-14 | 13.7 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
10 | 20,000 | 9 3/4"-15 7/8" | 6 1/8" | 10,000 | 2 1/4" | 2 1/4"-14 | 13.7 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
25 | 50,000 | 10 3/4"-16 7/8" | 6 1/8" | 10,000 | 3 1/2" | 3 5/16"-12 | 32.2 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
25 | 50,000 | 10 3/4"-17" | 6 1/4" | 10,000 | 3 3/8" | 3 5/16"-12 | 32.2 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
30 | 60,000 | 4 5/8"-7" | 2 3/8" | 10,000 | 4" | __ | 15.8 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
30 | 60,000 | 4 5/8"-7" | 2 3/8" | 10,000 | 4" | __ | 15.8 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
50 | 100,000 | 4 7/8"-7 1/4" | 2 3/8" | 10,000 | 4 7/8" | __ | 22.9 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
55 | 110,000 | 11 1/8"-17 1/4" | 6 1/8" | 10,000 | 5" | 5"-12 | 69 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
100 | 200,000 | 5 5/8"-7 5/8" | 2" | 10,000 | 6 1/2" | __ | 44.2 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
Two-Height Hydraulic Jacks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/879/8799t31p1-@halfx_637550462734764011.png?ver=imagenotfound)
These jacks are as versatile as bottle jacks, but with two lifting points—a toe for lifting loads low to the ground, and a saddle for a higher, more stable lifting point.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Lg. | Wd. | Movement | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | |
2 | 4,000 | 4 1/2" | 5/8"-5 1/8" | 2" | 2" | 9 1/4"-13 3/4" | 3 1/2" | 2 3/8" | Rigid | 5" | 7" | 11 1/2" | Steel | __ | 0000000 | 0000000 |
5 | 10,000 | 4 5/8" | 1"-5 5/8" | 2 1/4" | 3" | 11 1/2"-16 1/8" | 4 3/4" | 3 3/8" | Rigid | 7 1/8" | 10 5/8" | 23 1/2" | Steel | 180° Pivoting Handle | 0000000 | 00000000 |
10 | 20,000 | 5 5/8" | 1 1/8"-6 3/4" | 2 3/8" | 3 1/4" | 12 7/8"-18 1/2" | 5 3/4" | 4 5/8" | Rigid | 8 5/8" | 11 1/4" | 23 1/2" | Steel | 180° Pivoting Handle | 0000000 | 00000000 |
Wheel Risers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/217/2179t11c1-h01f-digital-master1562694917-p9@halfx_636983392588770612.png?ver=imagenotfound)
Raise vehicles up for maintenance jobs or elevate them to dock height for loading and unloading. These risers have a diamond surface texture for positive traction.
Wheel Risers with Forklift Pockets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/635/6359n11c1-@halfx_b9j3p_1713532249.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/635/6359n12c1-@halfx_zcy20_1713532249.png?ver=imagenotfound)
Pockets make it easy to move these risers with a forklift. Use them to raise vehicles up for maintenance jobs or bring vehicles up to dock height for loading and unloading. The diamond surface texture creates good traction, so tires won't slip or spin.
A roll-off lip stops tires from going too far and accidentally falling off the riser.
For technical drawings and 3-D models, click on a part number.
For Maximum Fork | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Risers | Height | Capacity, lbs. | Width | Height | Level Length | Length | Width | Overall Width | Material | Features | Specifications Met | Each | |
1 | 6 1/4" | 40,000 | 7 1/2" | 2 1/2" | 24" | 48" | 24" | __ | Painted Steel | Forklift Pockets, Roll Off Lip | ANSI B56.1 | 0000000 | 0000000 |
2 | 6 1/4" | 40,000 | 7 1/2" | 2 1/2" | 24" | 48" | 24" | 101 1/8" | Painted Steel | Forklift Pockets | ANSI B56.1 | 0000000 | 00000000 |