These valves are rated for at least three times the pressure of standard threaded valves.

316 stainless steel valves are more corrosion resistant than steel valves.

Lockable lever handles can be fixed in place using a padlock (not included).

Standard-port valves slightly restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Maintain and repair these valves without unthreading pipe connections. They have a three-piece bolted body that disassembles inline for access to internal components. All are full port, so they do not restrict flow.

316 stainless steel valves are more corrosion resistant than bronze or steel valves.

Lockable lever handles can be fixed in place using a padlock (not included).

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

T-handles resist accidental movement when snagged or bumped.

Full-port valves do not restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Slide the included union fittings onto your pipe and thread these valves into the fittings—no lengthy installation process required. When it’s time to clean or maintain your line, just unthread the valves from the fittings. Made of plastic, they last longer than metal valves since the inside won’t corrode or pit. They’re also lighter weight than metal valves. With a full port, these valves won’t restrict flow.

Valves with a T-handle have a larger gripping surface than valves with a short lever handle, so they’re easier to turn in slippery environments.

PVC valves are commonly used in water lines. CPVC valves handle higher temperatures than PVC or polypropylene valves. They’re the best choice if your system connects to a heater.

For technical drawings and 3-D models, click on a part number.

Bolt these valves to ANSI flanges. Their lockable lever handle can be fixed in place using a padlock (not included). These valves have four mounting holes for attaching an actuator.

316 stainless steel valves are more corrosion resistant than cast iron or steel valves.

Full-port valves do not restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Also known as wafer ball valves, these combine the slim body of a butterfly valve with the high flow rates of a flanged ball valve. Bolt these valves to ANSI flanges—they meet ASME standards for dimensions, material, and pressure-temperature rating. They are full port, so they do not restrict flow.

316 stainless steel valves are more corrosion resistant than steel valves.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

Clean and maintain these valves without removing welded connections. Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection. For easy access to internal components, these valves have a three-piece bolted body that disassembles inline. They have a 316 stainless steel body for excellent corrosion resistance. Fix the lockable lever handle in place using a padlock (not included) with a shackle diameter up to 1/4”. Valves are full port, so they do not restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. These valves meet NSF/ANSI 61, which means they’re safe to use with drinking water systems. All have a T-handle that resists accidental movement when snagged or bumped. They are full port, so they do not restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Union fittings on the ends of these valves disassemble to cut down on installation and removal time. They meet NSF/ANSI 61 for use with drinking water. Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. All valves have a T-handle that resists accidental movement when snagged or bumped. They are full port, so they do not restrict flow. Socket-connect union by socket-connect union valves of pipe sizes 1/2 through 2 come with additional NPT female fittings.

Lockable T-handles can be fixed in place using a padlock (not included) with a shackle diameter up to 1/4".

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Union fittings on both ends of these valves disassemble for fast installation and removal from your pipeline. Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. These valves have a fluoroelastomer seal and a plastic body that can withstand aggressive and corrosive solutions in chemical-processing applications. All have a T-handle that resists accidental movement when snagged or bumped. Valves are full port, so they do not restrict flow.

Lockable T-handles can be fixed in place using a padlock (not included) with a shackle diameter up to 1/4”.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Also known as gate valves, these gradually open and close to prevent system damage from suddenly starting and stopping flow.

Wheel handles open and close with multiple turns, providing more controlled, shock-resistant flow than pull handles.

Pull handles open and close faster than wheel handles.

Nonrising stems stay in the same position whether the valve is open or closed. Valves with nonrising stems are often used underground and in low-clearance locations.

Rising stems lift as the valve opens and lower as the valve closes to provide a visual indication of whether flow is on or off. The stem is isolated from the process media for a longer service life than valves with a nonrising stem.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Bolt these valves to flanges. They gradually open and close to prevent system damage from suddenly starting and stopping flow.

Epoxy-coated cast iron valves are more corrosion resistant than plain cast iron or steel valves.

Wheel handles open and close with multiple turns, providing more controlled, shock-resistant flow than pull handles.

Nonrising stems stay in the same position whether the valve is open or closed. Valves with nonrising stems are often used underground and in other low-clearance locations.

Rising stems lift as the valve opens and lower as the valve closes to provide a visual indication of whether flow is on or off. The stem is isolated from the process media for a longer service life than valves with a nonrising stem.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Also known as butterfly valves, these bolt to flanges for adjusting and regulating flow in flanged pipelines.

Wafer valves must be sandwiched between two flanges; they have tabs or unthreaded holes to help align the valve between the flanges.

Lug valves can be sandwiched between two flanges or bolted directly to a single flange for servicing one end of the pipeline without depressurizing the other side. They have threaded flange holes with a hole pattern that matches ANSI flanges of the same pipe size.

Lockable lever handles can be fixed in place with a padlock (not included).

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

With seats that can stand up to aggressive and corrosive solutions, these valves are often used in chemical-processing applications. They bolt to flanges for adjusting and regulating flow in flanged pipelines.

Wafer valves must be sandwiched between two flanges; they have tabs or unthreaded holes to help align the valve between the flanges.

Lug valves can be sandwiched between two flanges or bolted directly to a single flange for servicing one end of the pipeline without depressurizing the other side. They have threaded flange holes with a hole pattern that matches ANSI flanges of the same pipe size.

Lockable lever handles have 10 flow-adjustment positions. The handle can be fixed in place with a padlock (not included).

Wheel handles open and close with multiple turns, providing fully adjustable flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

These valves open to allow flow in one direction and close when flow stops or reverses.

Nickel-plated brass valves are more corrosion resistant than plain brass or bronze valves.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

To achieve the maximum possible flow, internal components are designed to reduce flow resistance. These valves open to allow flow in one direction and close when flow stops or reverses. A removable cap provides easy access to internal components for maintenance.

316 stainless steel valves are more corrosion resistant than bronze valves.

Repair kits include everything you need to rebuild the valve.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.