About On/Off Valves
More
Flow-Indicating Threaded On/Off Valves
- Valve Type: Ball
- For Use With: Argon, Helium, Krypton, Neon, Oil, Steam, Water, Xenon
- Seal Material: Fluoroelastomer Rubber
- Specifications Met: CSA Certified, CSA-US Certified, FM Approved, UL Listed
An easy-to-read flow-indicating handle shows the percentage the valve is open. These valves are full port, so they do not restrict flow. UL Listed for use with liquefied-petroleum gas, they meet U.S. safety standards.
Nickel-plated brass valves are more corrosion resistant than plain brass valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size  | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Brass Body | ||||||||
|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||||
| 1/4 | 7.7 | 600 psi @ 320° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 1 13/16" | 0000000 | 000000 |
| 3/8 | 7.8 | 600 psi @ 320° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 1 7/8" | 0000000 | 00000 |
| 1/2 | 16.8 | 600 psi @ 235° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 2 1/2" | 0000000 | 00000 |
| 3/4 | 34.8 | 600 psi @ 235° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 2 3/4" | 0000000 | 00000 |
| 1 | 52.2 | 500 psi @ 275° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 3 5/16" | 0000000 | 00000 |
| 1 1/2 | 174 | 500 psi @ 275° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 4 3/16" | 0000000 | 000000 |
| 2 | 255.2 | 500 psi @ 275° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 5" | 0000000 | 000000 |
Nickel-Plated Brass Body | ||||||||
NPT Female × NPT Female | ||||||||
| 1/4 | 7.7 | 600 psi @ 235° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 1 13/16" | 0000000 | 00000 |
| 3/8 | 7.8 | 600 psi @ 235° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 1 7/8" | 0000000 | 00000 |
| 1/2 | 16.8 | 600 psi @ 235° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 2 1/2" | 0000000 | 00000 |
| 3/4 | 34.8 | 600 psi @ 235° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 2 3/4" | 0000000 | 00000 |
| 1 | 52.2 | 500 psi @ 275° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 3 5/16" | 0000000 | 00000 |
| 1 1/2 | 174 | 500 psi @ 275° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 4 3/16" | 0000000 | 000000 |
| 2 | 255.2 | 500 psi @ 275° F | 150 psi @ 365° F | -40° to 365° | 29.89 | 5" | 0000000 | 000000 |
Easy-to-Install Plastic Threaded On/Off Valves
For fast installation and removal from pipelines, these valves have union fittings that disassemble into multiple pieces.
Flow-indicating T-handles show the percentage the valve is open.
Standard-port valves slightly restrict flow.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Water
- Seal Material: EPDM Rubber
| Pipe Size | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
Dark Gray PVC Plastic Body | ||||||
|---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||
| 1/2 | 150 psi @ 65° F | 35° to 140° | Standard | 4 1/8" | 000000 | 0000000 |
Easy-to-Install Threaded On/Off Valves for Chemicals
For fast installation and removal from pipelines, these valves have union fittings that disassemble into multiple pieces. All have a plastic body that can stand up to aggressive and corrosive solutions in chemical-processing applications.
Flow-indicating T-handles show the percentage the valve is open.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: See table
- Ball Material: PVC Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: PTFE Plastic
| Pipe Size | Max. Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | For Use With | Each | |
Threaded Union × Threaded Union with Flow-Indicating T-Handle | |||||||
|---|---|---|---|---|---|---|---|
| 1/2 | 150 psi @ 65° F | 35° to 140° | Standard | 4 1/8" | Ammonia, Butane, Carbon Dioxide, Citric Acid, Hydrochloric Acid, Methanol, Nitric Acid, Nitrogen, Oxygen, Phosphoric Acid, Salt Water, Sodium Hydroxide, Water | 000000 | 0000000 |
Threaded Flow-Adjustment Valves
These valves gradually open and close to adjust and regulate flow.
Flow-indicating lever handles show the proportion the valve is open.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Butterfly
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
- Specifications Met: CSA Certified, CSA-US Certified, UL Listed
Flow-Indicating Lever Handle | ||||||
|---|---|---|---|---|---|---|
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
NPT Female × NPT Female—Straight | ||||||
| 1/4 | 4.5 | 175 psi @ 100° F | -20° to 275° | 2 1/4" | 0000000 | 000000 |
| 3/8 | 10 | 175 psi @ 100° F | -20° to 275° | 2 3/8" | 0000000 | 00000 |
| 1/2 | 13 | 175 psi @ 100° F | -20° to 275° | 1 15/16" | 0000000 | 00000 |
| 3/4 | 25 | 175 psi @ 100° F | -20° to 275° | 2 1/16" | 0000000 | 00000 |
| 1 | 43 | 175 psi @ 100° F | -20° to 275° | 2 5/16" | 0000000 | 00000 |
| 1 1/4 | 85 | 175 psi @ 100° F | -20° to 275° | 2 5/8" | 0000000 | 000000 |
| 1 1/2 | 112 | 175 psi @ 100° F | -20° to 275° | 2 7/8" | 0000000 | 000000 |
| 2 | 180 | 175 psi @ 100° F | -20° to 275° | 3 1/4" | 0000000 | 000000 |
Threaded Balancing Valves
- Valve Type: Ball
- For Use With: Water
- Seal Material: EPDM Rubber
- Specifications Met: CSA Certified
Thread these balancing valves onto pipe—they help you measure the pressure differential across the valve as well as change the flow rate to components in your system. Sometimes called circuit setters, they’re used in HVAC systems and other systems that require even flow distribution. To see what percentage they’re open, there’s an arrow on these valves that’s connected to their measuring plate. Readout ports on both sides let you attach flow measurement tools, such as pressure gauges and probes, which help you track how much the valves reduce flow. Open these valves to a saved percentage by using their memory shutoff function.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flow Coefficient (Cv) | Maximum Pressure | Temperature Range, °F | End-to-End Length | Each | |
Brass Body | ||||||
|---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||
| 1/2 | 1.52 | 400 psi @ 250° F | 0° to 250° | 3" | 0000000 | 0000000 |
| 3/4 | 2.75 | 400 psi @ 250° F | 0° to 250° | 3 1/16" | 0000000 | 000000 |
| 1 | 5.75 | 400 psi @ 250° F | 0° to 250° | 3 13/16" | 0000000 | 000000 |
| 1 1/4 | 12.5 | 400 psi @ 250° F | 0° to 250° | 4 7/16" | 0000000 | 000000 |
| 1 1/2 | 19.9 | 400 psi @ 250° F | 0° to 250° | 4 7/16" | 0000000 | 000000 |
| 2 | 40 | 400 psi @ 250° F | 0° to 250° | 5 3/16" | 0000000 | 000000 |
| 2 1/2 | 65 | 400 psi @ 250° F | 0° to 250° | 6" | 0000000 | 000000 |
| 3 | 112 | 400 psi @ 250° F | 0° to 250° | 6 1/2" | 0000000 | 00000000 |
Solder-Connect Balancing Valves
- Valve Type: Ball
- For Use With: Water
- Seal Material: EPDM Rubber
- Specifications Met: CSA Certified
Attach these balancing valves using solder—they help you measure the difference in pressure across the valve and adjust the flow rate to system components. Also known as circuit setters, they’re often used in systems that need an even distribution of flow, such as HVAC systems. To check what percentage they’re open, there’s an arrow on these valves that’s connected to their measuring plate. There are readout ports on both sides for connecting flow measurement tools, such as pressure gauges and probes, which help you track how much the valves reduce flow. Use the memory shutoff function to open them to a saved setting.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Flow Coefficient (Cv) | Maximum Pressure | Temperature Range, °F | End-to-End Length | Stem Type | Each | |
Brass Body | |||||||
|---|---|---|---|---|---|---|---|
Solder Connect × Solder Connect | |||||||
| 1/2" | 1.75 | 200 psi @ 250° F, 250 psi @ 225° F, 300 psi @ 200° F | 0° to 250° | 2 15/16" | Nonrising | 0000000 | 0000000 |
| 3/4" | 3.4 | 200 psi @ 250° F, 250 psi @ 225° F, 300 psi @ 200° F | 0° to 250° | 3 9/16" | Nonrising | 0000000 | 000000 |
| 1" | 5.75 | 200 psi @ 250° F, 250 psi @ 225° F, 300 psi @ 200° F | 0° to 250° | 4 5/16" | Nonrising | 0000000 | 000000 |