Shaft-Mounted Rotary Seals
Also known as V-rings and flingers, these seals protect shaft bearings by blocking dust and other contaminants while retaining lubricant. They’re Buna-N for excellent resistance to oil and grease. To install, stretch the seal over your shaft and press it firmly against the face plate. The Seal OD and Seal Width listed are the dimensions of the seal after it is installed.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
Inch
Side 1
Side 2
Profile
For Shaft | Seal | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Dia. Range | For Face Plate Dia. | ID | OD | Wd. | Max. Speed, rpm | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Each | |
Buna-N Rubber | ||||||||||||
| 1/4" | 0.210"-0.260" | 0.500"-0.550" | 0.193" | 0.547" | 0.190" | 29,000 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 00000 |
| 3/8" | 0.370"-0.450" | 0.890"-0.970" | 0.340" | 0.891" | 0.250" | 17,400 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 1/2" | 0.450"-0.530" | 0.970"-1.050" | 0.414" | 1.016" | 0.250" | 14,500 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 5/8" | 0.610"-0.690" | 1.210"-1.290" | 0.561" | 1.234" | 0.375" | 10,900 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 3/4" | 0.690"-0.770" | 1.290"-1.370" | 0.635" | 1.359" | 0.375" | 9,600 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 1" | 0.950"-1.070" | 1.550"-1.670" | 0.874" | 1.609" | 0.375" | 6,900 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 1 1/8" | 1.070"-1.140" | 1.670"-1.740" | 0.984" | 1.725" | 0.375" | 6,200 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 1 1/4" | 1.220"-1.300" | 1.820"-1.900" | 1.122" | 1.859" | 0.375" | 5,400 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 1 3/8" | 1.300"-1.420" | 1.900"-2.020" | 1.196" | 1.975" | 0.375" | 4,900 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 1 1/2" | 1.500"-1.700" | 2.100"-2.300" | 1.380" | 2.109" | 0.375" | 4,300 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 1 3/4" | 1.700"-1.890" | 2.300"-2.490" | 1.564" | 2.359" | 0.375" | 3,800 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 2" | 1.890"-2.090" | 2.490"-2.690" | 1.739" | 2.609" | 0.375" | 3,400 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 2 1/4" | 2.090"-2.290" | 2.690"-2.890" | 1.923" | 2.859" | 0.375" | 3,100 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 2 3/8" | 2.290"-2.480" | 2.890"-3.080" | 2.107" | 2.975" | 0.500" | 2,900 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 2 1/2" | 2.480"-2.680" | 3.080"-3.280" | 2.282" | 3.109" | 0.500" | 2,600 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 2 3/4" | 2.680"-2.880" | 3.280"-3.480" | 2.466" | 3.359" | 0.500" | 2,400 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 3" | 2.880"-3.070" | 3.480"-3.670" | 2.650" | 3.609" | 0.500" | 2,300 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 3 1/4" | 3.070"-3.270" | 3.670"-3.870" | 2.824" | 3.859" | 0.500" | 2,100 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 0000 |
| 3 1/2" | 3.470"-3.660" | 4.070"-4.260" | 3.192" | 4.109" | 0.500" | 1,900 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 00000 |
| 3 3/4" | 3.660"-3.860" | 4.260"-4.460" | 3.367" | 4.350" | 0.500" | 1,800 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 00000 |
| 4" | 3.860"-4.140" | 4.460"-4.740" | 3.551" | 4.609" | 0.500" | 1,700 | 100 | -20° to 225° | Durometer 85A (Hard) | Black | 0000000 | 00000 |
Metric
Side 1
Side 2
Profile
For Shaft | Seal | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia., mm | Dia.Range, mm | For Face Plate Dia., mm | ID, mm | OD, mm | Wd., mm | Max. Speed, rpm | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Each | |
Buna-N Rubber | ||||||||||||
| 10 | 9.5-11.5 | 9.5-11.5 | 9 | 15 | 3.4 | 10,100 | 5 | -40° to 212° | Durometer 60A (Medium) | Black | 00000000 | 00000 |
| 12 | 11.5-12.5 | 20.5-21.5 | 10.5 | 16.5 | 5.5 | 14,600 | 4 | -40° to 212° | Durometer 60A (Medium) | Black | 0000000 | 0000 |
| 15 | 13.5-15.5 | 22.5-24.5 | 12.5 | 18.5 | 5.5 | 12,200 | 4 | -40° to 212° | Durometer 60A (Medium) | Black | 0000000 | 0000 |
| 17 | 15.5-17.5 | 24.5-26.5 | 14 | 20 | 5.5 | 10,900 | 4 | -40° to 212° | Durometer 60A (Medium) | Black | 0000000 | 0000 |
| 18 | 17.5-19 | 17.5-19 | 16 | 22 | 3.4 | 6,900 | 5 | -40° to 212° | Durometer 60A (Medium) | Black | 00000000 | 0000 |
| 20 | 19-21 | 31-33 | 18 | 26 | 7.5 | 8,500 | 4 | -40° to 212° | Durometer 60A (Medium) | Black | 0000000 | 0000 |
| 22 | 21-24 | 21-24 | 20 | 28 | 4.7 | 5,400 | 5 | -40° to 212° | Durometer 60A (Medium) | Black | 00000000 | 000 |
| 26 | 24-27 | 36-39 | 22 | 30 | 7.5 | 6,900 | 4 | -40° to 212° | Durometer 60A (Medium) | Black | 0000000 | 0000 |
| 30 | 29-31 | 41-43 | 27 | 35 | 7.5 | 5,700 | 4 | -40° to 212° | Durometer 60A (Medium) | Black | 0000000 | 0000 |
| 32 | 31-33 | 31-33 | 29 | 37 | 4.7 | 4,100 | 5 | -40° to 212° | Durometer 60A (Medium) | Black | 00000000 | 0000 |
| 35 | 33-36 | 45-48 | 31 | 39 | 7.5 | 4,900 | 4 | -40° to 212° | Durometer 60A (Medium) | Black | 0000000 | 0000 |
| 41 | 38-43 | 53-58 | 36 | 46 | 9 | 4,200 | 4 | -40° to 212° | Durometer 60A (Medium) | Black | 0000000 | 0000 |
| 45 | 43-48 | 43-48 | 40 | 50 | 5.5 | 3,000 | 5 | -40° to 212° | Durometer 60A (Medium) | Black | 00000000 | 0000 |
| 51 | 48-53 | 63-68 | 45 | 55 | 9 | 3,400 | 4 | -40° to 212° | Durometer 60A (Medium) | Black | 0000000 | 0000 |
| 55 | 53-58 | 53-58 | 49 | 59 | 5.5 | 2,500 | 5 | -40° to 212° | Durometer 60A (Medium) | Black | 00000000 | 0000 |
| 60 | 58-63 | 58-63 | 54 | 64 | 5.5 | 2,300 | 5 | -40° to 212° | Durometer 60A (Medium) | Black | 00000000 | 0000 |
| 65 | 63-68 | 63-68 | 58 | 68 | 5.5 | 2,200 | 5 | -40° to 212° | Durometer 60A (Medium) | Black | 00000000 | 0000 |
PTFE Stackable V-Ring Packing Seals
Male and Female Adapters Stacked with Five V-Rings
Profile
Made of PTFE, these V-ring packing seals have excellent chemical resistance and withstand a wide temperature range of -110° F to 500° F. Stack as many V-rings as you need to fill grooves in valves, pumps, and cylinders.
Begin with a male and female adapter, then add V-rings between them to fill the space. Each V-ring adds to the sealing force; the female adapter also has a sealing edge. For a complete seal, you need male and female adapters (sold together) and at least one V-ring (sold in packs of 5).
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
V-Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Ht. | Temp. Range, °F | pH Resistance | Hardness | Color | Specifications Met | V-Ring Wd. | Pkg. of 5 | |
PTFE Plastic  | ||||||||||
| 1/4" | 5/8" | 0.188" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 000000 |
| 5/16" | 11/16" | 0.188" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 3/8" | 3/4" | 0.188" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 3/8" | 7/8" | 0.250" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 1/2" | 7/8" | 0.188" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 1/2" | 1" | 0.250" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 9/16" | 1 1/16" | 0.250" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 5/8" | 1 1/8" | 0.250" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 3/4" | 1 1/4" | 0.250" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 7/8" | 1 3/8" | 0.250" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 1" | 1 1/2" | 0.250" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 1 1/8" | 1 5/8" | 0.250" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 1 1/4" | 1 3/4" | 0.250" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.083" | 0000000 | 00000 |
| 1 3/8" | 2" | 0.313" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.140" | 0000000 | 00000 |
| 1 1/2" | 2 1/8" | 0.313" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.140" | 0000000 | 00000 |
| 1 3/4" | 2 3/8" | 0.313" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.140" | 0000000 | 00000 |
| 2" | 2 1/2" | 0.250" | -110° to 500° | 1-9 | Rockwell R60 (Extra Hard) | White | FDA Compliant 21 CFR 177.1550 | 0.140" | 0000000 | 00000 |
High-Pressure Leather Stackable V-Ring Packing Seals
Five V-Rings Stacked
Profile
These leather V-ring packing seals handle over twice the pressure as PTFE. Leather is tough, pliable, and wear resistant, so it flexes to fit uneven surfaces and fill voids. Stack as many V-rings as you need to fill grooves in valves, pumps, and cylinders—each additional ring adds to the sealing force.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
Max. Pressure, psi | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | V-Ring Wd. | Ht. | For Reciprocating Motion | For Oscillating Motion | Temp. Range, °F | pH Resistance | Color | Each | |
Wax-Filled Leather | ||||||||||
| 1/4" | 5/8" | 0.083" | 0.188" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 000000 |
| 3/8" | 3/4" | 0.083" | 0.188" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 1/2" | 7/8" | 0.083" | 0.188" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 1/2" | 1" | 0.083" | 0.250" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 9/16" | 1 1/16" | 0.083" | 0.250" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 5/8" | 1 1/8" | 0.083" | 0.250" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 3/4" | 1 1/4" | 0.083" | 0.250" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 1" | 1 1/2" | 0.083" | 0.250" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 1 1/8" | 1 5/8" | 0.083" | 0.250" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 1 1/4" | 1 3/4" | 0.083" | 0.250" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 1 3/8" | 2" | 0.140" | 0.313" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 1 1/2" | 2 1/8" | 0.140" | 0.313" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
| 1 3/4" | 2 3/8" | 0.140" | 0.313" | 5,000 | 1,000 | 0° to 180° | 0-7 | Black | 0000000 | 00000 |
Rod Seal Kits
Replace all the seals on the rod end of a hydraulic cylinder.
Fluoroelastomer rubber rod seals can handle higher temperatures than polyurethane or Buna-N rubber rod seals.
| For Rod Dia. | Temp. Range, °F | Each | |
For Parker 2H, 2L, 3L, H, L, and VH Series | |||
|---|---|---|---|
Polyurethane Rubber | |||
| 1/2" | -10° to 165° | 0000000 | 000000 |
| 5/8" | -10° to 165° | 0000000 | 00000 |
| 1" | -10° to 165° | 0000000 | 00000 |
| 1 3/8" | -10° to 165° | 0000000 | 00000 |
| 1 3/4" | -10° to 165° | 0000000 | 00000 |
| 2" | -10° to 165° | 0000000 | 00000 |
| 2 1/2" | -10° to 165° | 0000000 | 00000 |
| 3" | -10° to 165° | 0000000 | 000000 |
| 3 1/2" | -10° to 165° | 0000000 | 000000 |
For Hydro-Line N5 and R5 Series | |||
Buna-N Rubber | |||
| 1/2" | -30° to 175° | 0000000 | 00000 |
| 5/8" | -30° to 175° | 0000000 | 00000 |
| 1" | -30° to 175° | 0000000 | 00000 |
| 1 3/8" | -30° to 175° | 0000000 | 00000 |
| 1 3/4" | -30° to 175° | 0000000 | 00000 |
| 2" | -30° to 175° | 0000000 | 00000 |
| 2 1/2" | -30° to 175° | 0000000 | 00000 |
Fluoroelastomer Rubber | |||
| 1" | 32° to 390° | 0000000 | 000000 |
| 1 3/8" | 32° to 390° | 0000000 | 000000 |
Piston Seal Kits
Replace all the seals on the piston of a hydraulic cylinder.
| For Bore Dia. | Number of Piston Seals | Temp. Range, °F | Each | |
For Miller and HV3 Series | ||||
|---|---|---|---|---|
Buna-N Rubber Seal | ||||
| 1 1/2" | 2 | -10° to 165° | 00000000 | 000000 |
| 2" | 2 | -10° to 165° | 00000000 | 00000 |
| 2 1/2" | 2 | -10° to 165° | 00000000 | 000000 |
| 3 1/4" | 2 | -10° to 165° | 00000000 | 000000 |
| 4" | 2 | -10° to 165° | 00000000 | 000000 |
For Parker 2HL, 3LL, and VHL Series | ||||
Buna-N Rubber Seal | ||||
| 1" | 2 | -10° to 165° | 0000000 | 00000 |
| 1 1/2" | 2 | -10° to 165° | 0000000 | 00000 |
| 2" | 2 | -10° to 165° | 0000000 | 00000 |
| 2 1/2" | 2 | -10° to 165° | 0000000 | 00000 |
| 3 1/4" | 2 | -10° to 165° | 0000000 | 00000 |
| 4" | 2 | -10° to 165° | 0000000 | 000000 |
| 5" | 2 | -10° to 165° | 0000000 | 000000 |
| 6" | 2 | -10° to 165° | 0000000 | 000000 |
For Hydro-Line N5 and R5 Series | ||||
Buna-N Rubber Seal | ||||
| 1 1/2" | 2 | -30° to 175° | 0000000 | 00000 |
| 2" | 2 | -30° to 175° | 0000000 | 00000 |
| 2 1/2" | 2 | -30° to 175° | 0000000 | 00000 |
| 3 1/4" | 2 | -30° to 175° | 0000000 | 00000 |
| 4" | 2 | -30° to 175° | 0000000 | 000000 |