Angle Rails for V-Groove Track Rollers
Use these rails with any track rollers that have a 90° V-groove. The bottom can be drilled for mounting.
420 stainless steel rails are more corrosion resistant than steel rails. Use them in areas where frequent washdowns with harsh cleaners take place.
Rails with a Rockwell hardness rating offer improved wear resistance over unhardened rails. The higher the hardness rating, the harder the metal.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Angle Ht. | 1 ft. | 2 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | |
Steel | |||||||||
| 7/16" | 3/16" | 1/8" | 00000000 | ||||||
| 5/8" | 1/4" | 3/16" | 000000 | ||||||
| 7/8" | 11/32" | 1/4" | 000000 | ||||||
| 1 1/16" | 7/16" | 5/16" | 000000 | ||||||
Steel with Rockwell C53 Hardness | |||||||||
| 5/8" | 1/4" | 3/16" | 000000 | ||||||
| 7/8" | 11/32" | 1/4" | 000000 | ||||||
| 1 1/16" | 7/16" | 5/16" | 000000 | ||||||
420 Stainless Steel  | |||||||||
| 5/8" | 1/4" | 3/16" | 00000000 | ||||||
| 7/8" | 11/32" | 1/4" | 00000000 | ||||||
420 Stainless Steel with Rockwell C40 Hardness | |||||||||
| 5/8" | 1/4" | 3/16" | 00000000 | ||||||
| 7/8" | 11/32" | 1/4" | 00000000 | ||||||
Track Roller Carriages and Guide Rails
V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail. Wipers sweep away dust and contaminants and distribute lubricant along the rail. Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). Mount in any orientation without affecting load capacity.
0.516" wide guide rails require a support rail (sold separately) for carriage clearance. Order one per guide rail.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages with Adjustable Steel Rollers | Aluminum Support Rails | Steel Guide Rails | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | O'all Ht. | Carriage Wd. | Carriage Lg. | Max. Temp., °F | Each | Rail Lengths | Per Inch | Rail Lengths | Per Inch | |||
| 0.516" | 110 | 0.788" | 1.75" | 2" | 245° | 000000 | 0000000 | 000000 | 00000 | 000000 | 00000 | ||
| Each | Per mm | ||||||||||||
| 50mm | 220 | 32mm | 80mm | 90mm | 155° | 000000 | 000000 | __ | 000000 | 00 | 0000000 | 000 | |
| 72mm | 550 | 43mm | 116mm | 127mm | 155° | 000000 | 000000 | __ | 000000 | 00 | 0000000 | 000 | |
| 102mm | 1,450 | 57mm | 165mm | 172mm | 155° | 000000 | 000000 | __ | 000000 | 00 | 0000000 | 000 | |
| 140mm | 3,500 | 69mm | 222mm | 242mm | 155° | 000000 | 000000 | __ | 000000 | 00 | 0000000 | 000 | |
High-Temperature Track Roller Carriages and Guide Rails
High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer. Their V-shaped rails allow them to operate well in dirty environments because the debris won’t get trapped on the rail. Wipers sweep away dust and contaminants and distribute lubricant along the rail. Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). Mount in any orientation without affecting load capacity.
Guide rails require a support rail (sold separately) for carriage clearance. Order one per guide rail.
For technical drawings and 3-D models, click on a part number.
Light Duty Track Roller Carriages and Guide Rails
Nylon rollers provide low-friction movement for light loads and corrosive environments. The V-shaped profile of the rollers and rails prevents debris from becoming trapped on the rail. Wipers sweep away dust and contaminants and distribute lubricant along the rail. Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). Mount in any orientation without affecting load capacity.
Guide rails require a support rail (sold separately) for carriage clearance. Order one per guide rail.
For technical drawings and 3-D models, click on a part number.
Self-Aligning Side-Mount Track Roller Carriages and Guide Rails
Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel. The floating bearing in these carriages adjusts to correct misalignment between rails, so your carriages still move in tandem. A complete system includes a fixed-alignment carriage and rail on one side and a self-aligning carriage and rail on the other. All components are sold separately.
Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). They have permanently lubricated rollers to save maintenance time and effort.
Fixed-alignment rails have a C-shaped profile that ensures the system travels in a straight line.
For technical drawings and 3-D models, click on a part number.
Track Roller Carriages and Guide Rails for Curves
Create a low-maintenance system with loops and curved paths in assembly stations and other repetitive processes. The track rollers that support these carriages keep contaminants out in dusty environments and prevent debris from getting trapped on the rail. You can adjust the carriages for a snug or loose fit on the rail (also known as preload).
Note: Each carriage can only be used with its corresponding guide rail.
For technical drawings and 3-D models, click on a part number.
Steel Carriages with Adjustable Steel Rollers | 90° Angle Steel Guide Rails | Half-Round Steel Guide Rails | Round Steel Guide Rails | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Bend Radius, mm | For Rail Wd., mm | Dynamic Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Roller Dia., mm | Max. Temp., °F | Each | Rail Lg., mm | Each | Rail Lg., mm | Each | Rail Lg., mm | Each | ||||
| 175 | 25 | 350 | 30.5 | 80 | 105 | 25 | 175° | 0000000 | 0000000 | 276 | 0000000 | 0000000 | 551 | 0000000 | 000000000 | 1,103 | 0000000 | 000000000 |