Outside Micrometers for End Mills, Taps, and Reamers
A V-shaped anvil is designed to measure the outside diameter of cutting tools with three flutes. This micrometer comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. It has a ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. A constant-force mechanism stops the micrometer’s spindle from tightening once it contacts the surface of the measured object. This ensures repeatable measurements and prevents over-tightening. When the spindle stops tightening, the thimble stops turning, but the speeder knob will continue turning with a clicking sound.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the micrometer directly to your PC.
10-pin data cables (sold separately) connect the micrometer to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the micrometer to your PC without being tethered by a cable.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2089n11p2-a01b-digital@halfx_637008749075046815.png?ver=imagenotfound)
Measuring Range | Accuracy | Measuring Increments | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Frame Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
Ratchet-Stop Thimble | ||||||||||||
0.05"-0.6" | 1.27 mm-15.24 mm | ±0.0002" | ±0.00508 mm | 0.00005" | 0.001 mm | 0.98" | Cast Iron | Yes | Mitutoyo | 314-351-30 | 0000000 | 0000000 |