Filter by
DFARS Compliance
Utility Knife Blades
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Dispenser Pack
Make quick, shallow cuts with these short blades. Check the style of the blade used in your knife and match it with the images shown here.
High-speed steel blades last longer than steel blades. Ceramic blades retain their sharp edge up to 10 times longer than metal blades and won’t rust. These blades don’t conduct electricity, so you can use them in applications where metal blades will cause damage. However, they’re more brittle than metal blades.
Titanium nitride (TiN) coated blades last longer than uncoated blades. They’re also nonstick.
Serrated blades allow for faster cuts with less force than straight blades.
Dispenser distributes one blade at a time and it can be mounted on a wall.
For technical drawings and 3-D models, click on a part number.
Utility Knife Blades
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Dispenser Pack
Blade | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Material | Edge | Includes | Pkg. Qty. | Pkg. | ||
For Use On Cardboard, Cork, Fabric, Leather, Paper, Plastic, Rubber | |||||||||
| 1 | 2 3/8" | 3/4" | 0.024" | Titanium Nitride (TiN) Coated Steel | Straight | __ | 5 | 00000000 | 00000 |
| 1 | 2 3/8" | 3/4" | 0.024" | Titanium Nitride (TiN) Coated Steel | Straight | __ | 100 | 00000000 | 00000 |
| 1 | 2 3/8" | 3/4" | 0.024" | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 1 | 2 3/8" | 3/4" | 0.025" | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 1 | 2 3/8" | 3/4" | 0.025" | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 1 | 2 3/8" | 3/4" | 0.036" | Stainless Steel | Straight | __ | 100 | 0000000 | 000000 |
| 1 | 2 1/2" | 3/4" | 0.025" | High-Speed Steel | Straight | __ | 5 | 0000000 | 0000 |
| 1 | 2 1/2" | 3/4" | 0.025" | High-Speed Steel | Straight | Dispenser | 100 | 0000000 | 00000 |
| 2 | 2" | 3/4" | 0.018" | Steel | Straight | __ | 5 | 0000000 | 0000 |
| 2 | 2" | 3/4" | 0.025" | Steel | Straight | __ | 5 | 0000000 | 0000 |
| 2 | 2 1/4" | 3/4" | 0.018" | Steel | Straight | __ | 100 | 0000000 | 00000 |
| 2 | 2 1/4" | 3/4" | 0.018" | Steel | Straight | Dispenser | 100 | 00000000 | 00000 |
| 3 | 2 3/8" | 3/4" | 0.025" | Titanium Nitride (TiN) Coated High-Speed Steel | Straight | __ | 5 | 0000000 | 0000 |
| 3 | 2 3/8" | 3/4" | 0.025" | Titanium Nitride (TiN) Coated High-Speed Steel | Straight | Dispenser | 100 | 0000000 | 00000 |
| 4 | 2 1/4" | 3/4" | 0.025" | Steel | Straight | __ | 5 | 0000000 | 0000 |
| 4 | 2 5/16" | 3/4" | 0.024" | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 4 | 2 5/16" | 3/4" | 0.024" | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 4 | 2 5/16" | 3/4" | 0.024" | Steel | Straight | Dispenser | 100 | 00000000 | 00000 |
| 4 | 2 1/2" | 7/8" | 0.027" | Steel | Straight | __ | 5 | 000000 | 0000 |
| 5 | 2" | 3/4" | 0.025" | Steel | Straight | __ | 100 | 0000000 | 00000 |
| 5 | 2" | 3/4" | 0.025" | Steel | Straight | Dispenser | 100 | 00000000 | 00000 |
| 6 | 1 3/4" | 3/4" | 0.025" | Steel | Straight | __ | 5 | 000000 | 0000 |
| 6 | 1 3/4" | 3/4" | 0.025" | Steel | Straight | __ | 60 | 00000000 | 00000 |
| 6 | 1 3/4" | 3/4" | 0.025" | Steel | Straight | __ | 100 | 000000 | 00000 |
| 7 | 2 1/2" | 3/4" | 0.025" | Steel | Serrated | __ | 5 | 0000000 | 0000 |
| 7 | 2 1/2" | 3/4" | 0.025" | Steel | Serrated | __ | 50 | 0000000 | 00000 |
| 7 | 2 1/2" | 3/4" | 0.025" | Steel | Serrated | Dispenser | 100 | 0000000 | 00000 |
| 8 | 2" | 3/4" | 0.025" | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 8 | 2" | 3/4" | 0.025" | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 8 | 2 1/4" | 3/4" | 0.025" | Steel | Straight | __ | 5 | 0000000 | 0000 |
| 8 | 2 1/4" | 3/4" | 0.025" | Steel | Straight | Dispenser | 100 | 0000000 | 00000 |
| 9 | 1 7/8" | 3/4" | 0.025" | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 9 | 1 7/8" | 3/4" | 0.025" | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 10 | 1 15/16" | 11/16" | 0.023" | Steel | Straight | Dispenser | 50 | 00000000 | 00000 |
| 11 | 1 1/8" | 3/8" | 0.018" | Steel | Straight | __ | 5 | 0000000 | 0000 |
| 11 | 1 1/8" | 3/8" | 0.018" | Steel | Straight | __ | 50 | 00000000 | 00000 |
| 12 | 2 1/8" | 3/4" | 0.025" | Steel | Straight | __ | 10 | 0000000 | 0000 |
| 13 | 2 1/8" | 11/16" | 0.023" | Steel | Straight | Dispenser | 10 | 00000000 | 0000 |
| 14 | 1 9/32" | 1/4" | 0.05" | Ceramic | Straight | __ | 3 | 00000000 | 00000 |
Stanley Utility Knife Blades
1
8
15
16
Dispenser Pack
Blade | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Mfr. Model No. | Lg. | Wd. | Thick. | Material | Edge | Mfr. Model Number | Includes | Pkg. Qty. | Pkg. | ||
For Use On Cardboard, Cork, Fabric, Leather, Paper, Plastic, Rubber | |||||||||||
| 1 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-432, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 2 1/2" | 3/4" | 0.024" | Steel | Straight | 11-921 | __ | 5 | 0000000 | 00000 |
| 1 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-432, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 2 1/2" | 3/4" | 0.024" | Steel | Straight | 11-921 | __ | 400 | 0000000 | 00000 |
| 1 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-432, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 2 1/2" | 3/4" | 0.024" | Steel | Straight | 11-921 | Dispenser | 10 | 0000000 | 0000 |
| 1 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-432, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 2 1/2" | 3/4" | 0.024" | Steel | Straight | 11-921 | Dispenser | 100 | 0000000 | 00000 |
| 1 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 2" | 3/4" | 0.017" | Steel | Straight | 11-911 | Dispenser | 100 | 0000000 | 00000 |
| 1 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 2 1/2" | 3/4" | 0.024" | Steel | Straight | 11-700 | __ | 5 | 0000000 | 0000 |
| 1 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 2 1/2" | 3/4" | 0.024" | Steel | Straight | 11-700A | Dispenser | 100 | 0000000 | 00000 |
| 1 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-479, 10-499, 10-779, 10-788, 10-813, 10-989 | 2" | 3/4" | 0.017" | Steel | Straight | 11-911 | __ | 5 | 0000000 | 0000 |
| 1 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-479, 10-499, 10-779, 10-788, 10-989 | 2 1/2" | 3/4" | 0.035" | Steel | Straight | 11-931 | __ | 5 | 0000000 | 0000 |
| 1 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-479, 10-499, 10-779, 10-788, 10-989 | 2 1/2" | 3/4" | 0.035" | Steel | Straight | 11-931 | __ | 100 | 0000000 | 00000 |
| 8 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 2 1/8" | 3/4" | 0.024" | Steel | Straight | 11-987 | __ | 5 | 0000000 | 0000 |
| 8 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 2 1/4" | 3/4" | 0.024" | Steel | Straight | 11-988 | Dispenser | 100 | 0000000 | 00000 |
| 15 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-209, 10-299, 10-399, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 1 7/8" | 3/4" | 0.024" | Steel | Straight | 11-983 | __ | 5 | 0000000 | 0000 |
| 15 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-209, 10-299, 10-399, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 1 7/8" | 3/4" | 0.024" | Steel | Straight | 11-983 | Dispenser | 100 | 0000000 | 00000 |
| 16 | 10-079, 10-099, 10-175, 10-179, 10-189, 10-193, 10-209, 10-299, 10-399, 10-479, 10-499, 10-778, 10-779, 10-788, 10-813, 10-989 | 2 1/8" | 3/4" | 0.024" | Steel | Straight | 11-961 | Dispenser | 100 | 0000000 | 00000 |
Slice Utility Knife Blades
17
18
Blade | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Mfr. Model No. | Lg. | Wd. | Thick. | Material | Edge | Mfr. Model Number | Pkg. Qty. | Pkg. | ||
For Use On Cardboard, Cork, Fabric, Leather, Paper, Plastic, Rubber | ||||||||||
| 17 | 10490, 10491 | 2 7/16" | 3/4" | 0.031" | Ceramic | Straight | 10524 | 2 | 000000000 | 000000 |
| 18 | 10477, 10550, 10554, 10558, 10562, 10585, 10591, 10593 | 2 9/16" | 1/2" | 0.051" | Ceramic | Straight | 10526 | 3 | 000000000 | 00000 |
Precision Knife Blades
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y
Z
AA
BB
CC
DD
EE
FF
GG
HH
JJ
KK
LL
MM
NN
PP
Dispenser
Make precise cuts to paper, plastic, fabric, and other materials with these sharp blades.
Zirconium-nitride-coated steel blades are coated for extra durability.
Titanium-nitride-coated steel blades stay sharp longer than uncoated steel blades. They’re also nonstick.
Stainless steel blades are corrosion resistant.
Ceramic blades stay sharp up to 10 times longer than metal blades, but because they’re more brittle, they’re easier to break. They won’t rust or conduct electricity, so they can be used in applications where metal blades can’t.
Dispenser distributes blades without exposing the sharp edge.
Note: Width is the widest point of the cutting edge.
Blade | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Knife Blade Trade No. | Style | Lg. | Wd. | Thick. | Shank Wd. | Shank Dia. | Material | Edge | Includes | Pkg. Qty. | Pkg. | ||
For Use On Carbon Fiber, Cardboard, Cork, Fabric, Leather, Paper, Plastic, Rubber, Wood | |||||||||||||
Fits Handle: Cutra WonderCutter S, Cutra WonderCutter X | |||||||||||||
| __ | A | Angled for detail cutting | 1" | 3/16" | 0.014" | 0.19" | __ | Steel | Straight | __ | 40 | 0000000 | 00000 |
Fits Handle: Cutra WonderCutter X | |||||||||||||
| __ | B | Carving, digging | 13/16" | 3/16" | 0.016" | 0.16" | __ | Steel | Straight | __ | 1 | 0000000 | 0000 |
| __ | C | Small precise cutting | 1" | 1/16" | 0.016" | 0.16" | __ | Steel | Straight | __ | 1 | 0000000 | 0000 |
| __ | D | Cutting thicker material | 1" | 3/16" | 0.016" | 0.16" | __ | Steel | Straight | __ | 1 | 0000000 | 0000 |
| __ | E | Cutting, shaping, saw blade | 1" | 3/16" | 0.016" | 0.16" | __ | Steel | Saw Blade | __ | 1 | 0000000 | 0000 |
For Use On Cardboard, Cork, Fabric, Leather, Paper, Plastic, Rubber | |||||||||||||
Fits Handle: Excel No. 1, Excel No. 18, Excel No. 26, Excel No. 71, Fiskars 167000, Griffin No. 7, Griffin No. 7SC, Olfa AK-4, PO No. 1, Techni-Edge No. 1, Techni-Edge No. 1 X-Press, Techni-Edge No. 1SGK, X-ACTO® No. 1, X-ACTO® Soft Grip, X-ACTO® X2000, X-ACTO® X3204 | |||||||||||||
| 5 | F | Angled for detail cutting and chiseling | 1.4" | 1/4" | 0.02" | 0.25" | __ | Steel | Straight | __ | 15 | 0000000 | 00000 |
| 5 | F | Light and medium cutting | 1.4" | 1/4" | 0.02" | 0.25" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 5 | F | Light and medium cutting | 1.4" | 1/4" | 0.02" | 0.25" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 6 | G | Detail and curve cutting; stenciling | 1.41" | 1/8" | 0.02" | 0.25" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 6 | G | Detail and curve cutting; stenciling | 1.41" | 1/8" | 0.02" | 0.25" | __ | Steel | Straight | __ | 15 | 0000000 | 00000 |
| 6 | G | Detail and curve cutting; stenciling | 1.41" | 1/8" | 0.02" | 0.25" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 10 | H | General purpose cutting, carving, and slicing | 1.52" | 5/16" | 0.02" | 0.25" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 10 | H | General purpose cutting, carving, and slicing | 1.52" | 5/16" | 0.02" | 0.25" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 10 | H | General purpose cutting, carving, and slicing | 1.52" | 5/16" | 0.02" | 0.25" | __ | Steel | Straight | Dispenser | 15 | 0000000 | 0000 |
| 11 | J | Cutting adhesives/tapes without sticking | 1 9/16" | 3/8" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Steel | Straight | __ | 10 | 00000000 | 00000 |
| 11 | J | Cutting adhesives/tapes without sticking | 1.575" | 3/8" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Steel | Straight | __ | 5 | 0000000 | 0000 |
| 11 | J | Cutting adhesives/tapes without sticking | 1.575" | 3/8" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Steel | Straight | __ | 100 | 0000000 | 00000 |
| 11 | J | Cutting adhesives/tapes without sticking | 1.575" | 3/8" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Steel | Straight | Dispenser | 15 | 0000000 | 00000 |
| 11 | J | Ultrasharp for precision cutting | 1.575" | 3/8" | 0.02" | 0.25" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 11 | J | Ultrasharp for precision cutting | 1.575" | 3/8" | 0.02" | 0.25" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 11 | J | Ultrasharp for precision cutting | 1.575" | 3/8" | 0.02" | 0.25" | __ | Steel | Straight | Dispenser | 15 | 00000000 | 0000 |
| 11 | J | Ultrasharp for precision cutting | 1.575" | 3/8" | 0.02" | 0.25" | __ | Zirconium-Nitride-Coated Steel | Straight | __ | 5 | 0000000 | 0000 |
| 11 | J | Ultrasharp for precision cutting | 1.575" | 3/8" | 0.02" | 0.25" | __ | Zirconium-Nitride-Coated Steel | Straight | __ | 100 | 0000000 | 00000 |
| 11 | J | Ultrasharp for precision cutting | 1.575" | 3/8" | 0.02" | 0.25" | __ | Zirconium-Nitride-Coated Steel | Straight | Dispenser | 15 | 0000000 | 00000 |
| 11 | J | General purpose cutting, trimming, and stripping | 1 9/16" | 3/8" | 0.02" | 0.25" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 11 | J | General purpose cutting, trimming, and stripping | 1 9/16" | 3/8" | 0.02" | 0.25" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 11 | J | General purpose cutting, trimming, and stripping | 1 9/16" | 3/8" | 0.02" | 0.25" | __ | Steel | Straight | __ | 250 | 000000000 | 000000 |
| 11 | J | General purpose cutting, trimming, and stripping | 1 9/16" | 3/8" | 0.02" | 0.25" | __ | Zirconium-Nitride-Coated Steel | Straight | __ | 5 | 0000000 | 0000 |
| 11 | J | General purpose cutting, trimming, and stripping | 1 9/16" | 3/8" | 0.02" | 0.25" | __ | Zirconium-Nitride-Coated Steel | Straight | __ | 100 | 0000000 | 00000 |
| 12 | K | General purpose cutting, carving, trimming, and slicing | 0.98" | 1/4" | 0.02" | 0.25" | __ | Steel | Straight | __ | 5 | 0000000 | 0000 |
| 12 | K | General purpose cutting, carving, trimming, and slicing | 0.98" | 1/4" | 0.02" | 0.25" | __ | Steel | Straight | __ | 15 | 0000000 | 0000 |
| 12 | K | General purpose cutting, carving, trimming, and slicing | 0.98" | 1/4" | 0.02" | 0.25" | __ | Steel | Straight | __ | 100 | 0000000 | 00000 |
| 13 | L | Fine-tooth saw blade; small, precise cutting | 1.708" | 1/4" | 0.02" | 0.25" | __ | Steel | Saw Blade | __ | 15 | 0000000 | 00000 |
| 13 | L | Fine-tooth saw blade; small, precise cutting | 1 3/4" | 1/4" | 0.02" | 0.25" | __ | Steel | Saw Blade | __ | 5 | 00000000 | 0000 |
| 16 | M | Stenciling, etching, and scoring | 1.4" | 5/16" | 0.02" | 0.25" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 16 | M | Stenciling, etching, and scoring | 1.4" | 5/16" | 0.02" | 0.25" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 16 | M | Stenciling, etching, and scoring | 1.4" | 5/16" | 0.02" | 0.25" | __ | Steel | Straight | Dispenser | 15 | 00000000 | 0000 |
| 16 | M | Cutting adhesives/tapes without sticking | 1.4" | 5/16" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Steel | Straight | __ | 5 | 0000000 | 0000 |
| 16 | M | Cutting adhesives/tapes without sticking | 1.4" | 5/16" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Steel | Straight | __ | 100 | 0000000 | 00000 |
| 16 | M | Cutting adhesives/tapes without sticking | 1.4" | 5/16" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Steel | Straight | Dispenser | 15 | 0000000 | 00000 |
| 17 | N | Light to medium chiseling | 1 1/2" | 3/8" | 0.02" | 0.25" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 17 | N | Light to medium chiseling | 1 1/2" | 3/8" | 0.02" | 0.25" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 17 | N | Light to medium chiseling | 1 1/2" | 3/8" | 0.02" | 0.25" | __ | Steel | Straight | Dispenser | 15 | 00000000 | 0000 |
| 17 | N | Cutting adhesives/tapes without sticking | 1 1/2" | 3/8" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Steel | Straight | __ | 5 | 0000000 | 0000 |
| 17 | N | Cutting adhesives/tapes without sticking | 1 1/2" | 3/8" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Steel | Straight | __ | 100 | 0000000 | 00000 |
| 17 | N | Cutting adhesives/tapes without sticking | 1 1/2" | 3/8" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Steel | Straight | Dispenser | 15 | 0000000 | 00000 |
| 17A | P | Detail chiseling | 1.79" | 1/4" | 0.02" | 0.25" | __ | Steel | Straight | __ | 5 | 0000000 | 0000 |
| 17A | P | Detail chiseling | 1.79" | 1/4" | 0.02" | 0.25" | __ | Steel | Straight | __ | 15 | 0000000 | 00000 |
| 17A | P | Detail chiseling | 1.79" | 1/4" | 0.02" | 0.25" | __ | Steel | Straight | __ | 100 | 0000000 | 00000 |
| 21 | J | Cutting adhesives/tapes without sticking | 1.575" | 3/8" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Stainless Steel | Straight | __ | 5 | 0000000 | 0000 |
| 21 | J | Cutting adhesives/tapes without sticking | 1.575" | 3/8" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Stainless Steel | Straight | __ | 100 | 0000000 | 00000 |
| 21 | J | Cutting adhesives/tapes without sticking | 1.575" | 3/8" | 0.02" | 0.25" | __ | Titanium-Nitride-Coated Stainless Steel | Straight | Dispenser | 15 | 0000000 | 00000 |
| 21 | J | General purpose cutting, trimming, and stripping | 1.575" | 3/8" | 0.02" | 0.25" | __ | Stainless Steel | Straight | __ | 5 | 0000000 | 0000 |
| 21 | J | General purpose cutting, trimming, and stripping | 1.575" | 3/8" | 0.02" | 0.25" | __ | Stainless Steel | Straight | __ | 100 | 0000000 | 00000 |
| 21 | J | General purpose cutting, trimming, and stripping | 1.575" | 3/8" | 0.02" | 0.25" | __ | Stainless Steel | Straight | Dispenser | 15 | 0000000 | 0000 |
Fits Handle: Excel No. 2, Excel No. 5, Excel No. 6, Fiskars 165100, Griffin No. 14-15, Griffin No. 15, PO No. 2, PO No. 5, Techni-Edge No. 2, Techni-Edge No. 2SGK, X-ACTO® No. 2, X-ACTO® No. 5, X-ACTO® No. 6 | |||||||||||||
| 2 | J | Sharp angle for cutting medium to heavy material | 1 7/8" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 15 | 00000000 | 0000 |
| 2 | J | Sharp angle for cutting medium to heavy material | 1 7/8" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 15 | Q | Narrow saw blade; smooth cutting in tight areas | 2.2" | 3/8" | 0.025" | 0.35" | __ | Steel | Saw Blade | __ | 5 | 00000000 | 0000 |
| 18 | N | Cutting adhesives/tapes without sticking | 1.8" | 1/2" | 0.025" | 0.35" | __ | Titanium-Nitride-Coated Steel | Straight | __ | 5 | 0000000 | 0000 |
| 18 | N | Cutting adhesives/tapes without sticking | 1.8" | 1/2" | 0.025" | 0.35" | __ | Titanium-Nitride-Coated Steel | Straight | __ | 100 | 0000000 | 00000 |
| 18 | N | Medium to heavy scraping and cutting | 1.813" | 1/2" | 0.025" | 0.35" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 18 | N | Medium to heavy scraping and cutting | 1.813" | 1/2" | 0.025" | 0.35" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 19 | R | General purpose straight cutting | 1.62" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 19 | R | General purpose straight cutting | 1.62" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 15 | 0000000 | 0000 |
| 19 | R | General purpose straight cutting | 1.62" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 22 | S | General purpose carving | 1.82" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 22 | S | General purpose carving | 1.82" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 15 | 0000000 | 00000 |
| 22 | S | General purpose carving | 1.82" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 23 | T | Double-edged for carving | 1.77" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 23 | T | Double-edged for carving | 1.77" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 15 | 0000000 | 0000 |
| 23 | T | Double-edged for carving | 1.77" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 24 | J | Angled for detail cutting | 1.55" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 24 | J | Angled for detail cutting | 1.55" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
| 25 | U | Tapered-tip for carving | 1 7/8" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 25 | U | Tapered-tip for carving | 1 7/8" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 15 | 0000000 | 00000 |
| 25 | U | Tapered-tip for carving | 1 7/8" | 3/8" | 0.025" | 0.35" | __ | Steel | Straight | __ | 100 | 0000000 | 00000 |
| 26 | V | Angled for whittling and trimming | 3 1/16" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 26 | W | Angled for whittling and trimming | 3.1" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 15 | 0000000 | 00000 |
| 26 | W | Angled for whittling and trimming | 3.1" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 50 | 0000000 | 00000 |
| 27 | X | Narrow saw blade; smooth cutting in tight areas | 3 1/8" | 3/8" | 0.025" | 0.35" | __ | Steel | Saw Blade | __ | 5 | 00000000 | 0000 |
| 28 | Y | Curved for contouring and shaping | 1.78" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 5 | 00000000 | 0000 |
| 28 | Y | Curved for contouring and shaping | 1.78" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 15 | 0000000 | 00000 |
| 28 | Y | Curved for contouring and shaping | 1.78" | 7/16" | 0.025" | 0.35" | __ | Steel | Straight | __ | 100 | 00000000 | 00000 |
Fits Handle: Excel No. 70031 | |||||||||||||
| 59 | Z | Dual stripping | 1.13" | 5/16" | 0.021" | 0.3" | __ | Steel | Straight | __ | 2 | 0000000 | 0000 |
| 59 | Z | Dual stripping | 1.13" | 5/16" | 0.021" | 0.3" | __ | Steel | Straight | __ | 10 | 0000000 | 00000 |
Fits Handle: Slice 10580, Slice 10589 | |||||||||||||
| __ | AA | General purpose cutting, carving, trimming, and slicing | 1 1/4" | 1/4" | 0.032" | 0.24" | __ | Ceramic | Straight | __ | 4 | 0000000 | 00000 |
| __ | BB | General purpose cutting, trimming, and stripping | 1.28" | 1/4" | 0.03" | 0.24" | __ | Ceramic | Straight | __ | 4 | 0000000 | 00000 |
| __ | CC | General purpose cutting and carving | 1.29" | 1/4" | 0.02" | 0.24" | __ | Ceramic | Straight | __ | 4 | 0000000 | 00000 |
| __ | DD | Trimming, stripping | 1.31" | 1/4" | 0.03" | 0.24" | __ | Ceramic | Straight | __ | 4 | 0000000 | 00000 |
| __ | EE | Curved for carving and shaping | 1.29" | 1/4" | 0.03" | 0.24" | __ | Ceramic | Straight | __ | 4 | 0000000 | 00000 |
| __ | FF | Curved for carving and shaping | 1.29" | 1/4" | 0.03" | 0.24" | __ | Ceramic | Straight | __ | 4 | 0000000 | 00000 |
Fits Handle: X-ACTO® X3241 | |||||||||||||
| __ | GG | Curved and circle cutting | 3/16" | 1/16" | 0.01" | __ | 0.14" | Steel | Straight | __ | 2 | 0000000 | 0000 |
For Use On Cardboard, Cork, Fabric, Leather, Paper, Plastic, Rubber, Wood | |||||||||||||
Fits Handle: Excel No. 7, X-ACTO® Woodcarving | |||||||||||||
| 101 | HH | General purpose carving | 2 5/16" | 3/8" | 0.033" | 0.33" | __ | Steel | Straight | __ | 2 | 0000000 | 0000 |
| 102 | JJ | General purpose carving, cutting, and trimming | 2 3/8" | 5/16" | 0.033" | 0.33" | __ | Steel | Straight | __ | 2 | 0000000 | 0000 |
| 104 | KK | Curved for carving, contouring, and shaping | 2 1/4" | 5/16" | 0.033" | 0.33" | __ | Steel | Straight | __ | 2 | 0000000 | 0000 |
| 105 | LL | Curved for carving, contouring, and shaping | 2 3/16" | 5/16" | 0.032" | 0.33" | __ | Steel | Straight | __ | 2 | 0000000 | 0000 |
| 106 | MM | Curved for carving, contouring, and shaping | 2 1/4" | 5/16" | 0.032" | 0.33" | __ | Steel | Straight | __ | 2 | 0000000 | 0000 |
| 107 | NN | Curved for carving, contouring, and shaping | 2 1/4" | 5/16" | 0.033" | 0.33" | __ | Steel | Straight | __ | 2 | 0000000 | 0000 |
For Use On Cardboard, Paper | |||||||||||||
Fits Handle: Slice 10416, Slice 10417 | |||||||||||||
| __ | PP | Small precise cutting; intricate shape cutting | 3/32" | 1/16" | 0.022" | __ | 0.22" | Ceramic | Straight | __ | 4 | 0000000 | 00000 |
Breakaway Blades
1
2
Match your blade to the dimensions.
High-speed steel lasts longer than steel. Stainless steel resists corrosion.
Dispenser distributes one blade at a time and stores used blades. It can be mounted on a wall.
Style 2 blades have hook-shaped segments, which protect your cutting surface.
For technical drawings and 3-D models, click on a part number.
Blade | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Edge | No. of Segments per Blade | Includes | Pkg. Qty. | Pkg. | ||
For Use On Cardboard, Cork, Fabric, Leather, Paper, Plastic, Rubber | |||||||||
Steel Blade | |||||||||
| 1 | 3 3/16" | 9 mm (0.354") | 0.015" | Straight | 13 | __ | 50 | 00000000 | 000000 |
| 1 | 3 3/8" | 9 mm (0.354") | 0.016" | Straight | 13 | __ | 5 | 0000000 | 0000 |
| 1 | 3 3/8" | 9 mm (0.354") | 0.016" | Straight | 13 | __ | 100 | 00000000 | 00000 |
| 1 | 3 3/8" | 9 mm (0.354") | 0.02" | Straight | 13 | Dispenser | 10 | 00000000 | 0000 |
| 1 | 3 3/8" | 9 mm (0.354") | 0.02" | Straight | 13 | Dispenser | 100 | 000000000 | 00000 |
| 1 | 4 1/4" | 18 mm (0.709") | 0.02" | Straight | 8 | Dispenser | 10 | 00000000 | 0000 |
| 1 | 4 1/4" | 18 mm (0.709") | 0.02" | Straight | 8 | Dispenser | 100 | 000000000 | 00000 |
| 1 | 4 5/16" | 18 mm (0.709") | 0.02" | Straight | 8 | __ | 5 | 0000000 | 0000 |
| 1 | 4 5/16" | 18 mm (0.709") | 0.02" | Straight | 8 | __ | 100 | 00000000 | 00000 |
| 2 | 4 5/16" | 18 mm (0.709") | 0.02" | Straight | 4 | Dispenser | 5 | 00000000 | 0000 |
Stainless Steel Blade | |||||||||
| 1 | 3 3/8" | 9 mm (0.354") | 0.015" | Straight | 13 | __ | 10 | 00000000 | 0000 |
| 1 | 3 3/8" | 9 mm (0.354") | 0.015" | Straight | 13 | __ | 60 | 000000000 | 00000 |
| 1 | 4 3/8" | 18 mm (0.709") | 0.02" | Straight | 8 | __ | 5 | 00000000 | 0000 |
| 1 | 4 3/8" | 18 mm (0.709") | 0.02" | Straight | 8 | __ | 50 | 000000000 | 00000 |
High-Speed Steel Blade | |||||||||
| 1 | 3 7/8" | 18 mm (0.709") | 0.02" | Straight | 8 | __ | 10 | 00000000 | 00000 |
Ultra-Sharp Breakaway Blades
Also known as double-honed blades, these blades are sharpened on both sides, so they can be used on hard-to-cut materials such as Kevlar and rubber. Match your blade to the dimensions.
For technical drawings and 3-D models, click on a part number.
Blade | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Edge | No. of Segments per Blade | Pkg. Qty. | Pkg. | |
For Use On Kevlar, Rubber | |||||||
Steel Blade | |||||||
| 3 1/8" | 9 mm (0.354") | 0.015" | Straight | 13 | 50 | 00000000 | 000000 |
| 3 1/8" | 9 mm (0.354") | 0.015" | Straight | 13 | 300 | 000000000 | 000000 |
| 3 7/8" | 18 mm (0.709") | 0.02" | Straight | 8 | 10 | 00000000 | 0000 |
| 3 7/8" | 18 mm (0.709") | 0.02" | Straight | 8 | 50 | 00000000 | 00000 |
| 5" | 25 mm (0.984") | 0.03" | Straight | 7 | 20 | 00000000 | 00000 |
| 5" | 25 mm (0.984") | 0.03" | Straight | 7 | 120 | 000000000 | 000000 |
Heavy Duty Breakaway Blades
1
2
These blades are wider than other breakaway blades to cut through tough materials such as leather, rope, and thick cardboard. Match your blade to the dimensions.
Style 2 blades have hook-shaped segments, which protect your cutting surface.
For technical drawings and 3-D models, click on a part number.
Blade | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Style | Lg. | Wd. | Thick. | Edge | No. of Segments per Blade | Includes | Pkg. Qty. | Pkg. | |
For Use On Cardboard, Cork, Fabric, Leather, Paper, Plastic, Rubber | |||||||||
Steel Blade | |||||||||
| 1 | 5" | 25 mm (0.984") | 0.028" | Straight | 7 | __ | 5 | 00000000 | 00000 |
| 1 | 5" | 25 mm (0.984") | 0.028" | Straight | 7 | __ | 20 | 00000000 | 00000 |
| 1 | 5" | 25 mm (0.984") | 0.028" | Straight | 7 | __ | 30 | 000000000 | 00000 |
| 1 | 5" | 25 mm (0.984") | 0.028" | Straight | 7 | __ | 120 | 000000000 | 000000 |
| 2 | 5 1/2" | 25 mm (0.984") | 0.02" | Straight | 4 | Dispenser | 3 | 000000000 | 00000 |
Breakaway Blades for Multi-Blade Loading Utility Knives
Match your blade to the dimensions.
For technical drawings and 3-D models, click on a part number.