About Durometer
Durometer is the international standard for measuring the hardness of rubber, plastic, and most nonmetallic materials.
More
Tight-Tolerance Drive Rollers
The surface of these rollers is molded to a tolerance of either ±0.003 in. or ±0.08 mm to provide more consistent surface contact. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power. The urethane surface is nonmarring and wear resistant.
For technical drawings and 3-D models, click on a part number.
Roller | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Hub Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Aluminum Hub | ||||||||||
| 3/8" | 1/4" | 1/8" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 000000 | |
| 1/2" | 1/4" | 3/16" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/4" | 1/4" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/2" | 3/16" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/2" | 1/4" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 5/8" | 1/2" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/8" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 1/2" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/4" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1" | 3/16" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1" | 1/2" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 1/4" | 1/4" | 5/16" | 5/16" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 1/4" | 3/4" | 5/16" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 5/8" | 1/4" | 3/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 5/8" | 3/4" | 3/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2" | 1/4" | 3/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2" | 3/4" | 3/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2 1/2" | 3/8" | 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2 1/2" | 1" | 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 12mm | 6mm | 3mm | 6mm | Set Screw | 1 | Yes | -40° to 180° | 00000000 | 00000 | |
| 12mm | 6mm | 4mm | 6mm | Set Screw | 1 | Yes | -40° to 180° | 00000000 | 00000 | |
| 20mm | 10mm | 5mm | 8mm | Set Screw | 1 | Yes | -40° to 180° | 00000000 | 00000 | |
| 20mm | 10mm | 6mm | 8mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
| 25mm | 12mm | 6mm | 8mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
| 25mm | 12mm | 8mm | 8mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
| 30mm | 12mm | 6mm | 8mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
| 30mm | 12mm | 8mm | 8mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
| 35mm | 12mm | 8mm | 8mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
| 35mm | 12mm | 10mm | 8mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
| 40mm | 12mm | 10mm | 8mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
| 40mm | 12mm | 12mm | 8mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
| 50mm | 12mm | 12mm | 10mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
| 60mm | 12mm | 10mm | 12mm | Set Screw | 2 | Yes | -40° to 180° | 00000000 | 00000 | |
Abrasion-Resistant Drive Rollers
These urethane rollers are nonmarring and wear resistant. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Aluminum Hub | |||||||||||
| 1 1/2" | 1 1/4" | 3/8" | 7/8" | 3/8" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 000000 | |
| 1 1/2" | 1 1/4" | 1/2" | 7/8" | 3/8" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
Urethane Roller with Steel Hub | |||||||||||
| 2" | 29/32" | 5/8" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 1 1/4" | 1 5/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 60A (Medium) Blue | 0000000 | 00000 |
Abrasion-Resistant Self-Cleaning Drive Rollers
These urethane rollers are nonmarring and wear resistant. Ridges on the surface push dirt and debris out of the way. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Hub | |||||||||||
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
Abrasion-Resistant Flex-Grip Drive Rollers
These urethane rollers are nonmarring and wear resistant. The sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
Ultra-flexible rollers have larger sidewall holes than flexible rollers, so they compress more and better protect delicate material.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
Flexible Urethane Roller with Steel Hub | |||||||||||
| 2 1/2" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
| 2 1/2" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 2 1/2" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 2 1/2" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
Ultra-Flexible Urethane Roller with Aluminum Hub | |||||||||||
| 2 1/2" | 1" | 3/8" | 7/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 2 1/2" | 1" | 1/2" | 7/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 2 1/2" | 1" | 5/8" | 7/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 3" | 1" | 1/2" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 3" | 1" | 5/8" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 3" | 1" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 3" | 2" | 1/2" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 3" | 2" | 5/8" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 3" | 2" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1" | 1/2" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 1/2" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 5" | 1" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 5" | 1" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 5" | 2" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 5" | 2" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 6" | 1" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 6" | 1" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 6" | 2" | 3/4" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 6" | 2" | 1" | 1 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
Abrasion-Resistant Flex-Grip Press-Fit Drive Rollers
Mount these rollers directly onto your shaft without the need for set screws or keyways. They have a press-fit hub, but you can add your own hub to create a custom roller. Made of urethane, they are nonmarring and wear resistant. The sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers spin with the shaft or stud to transfer power.
Ultra-flexible rollers have larger sidewall holes than flexible rollers, so they compress more and better protect delicate material.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Shaft Mount Type | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Flexible Urethane Roller with Steel Hub | |||||||
| 2 1/2" | 1" | 1 1/8" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
| 2 1/2" | 1" | 1 1/4" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 2 1/2" | 2" | 1 1/8" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 2 1/2" | 2" | 1 1/4" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1" | 1 1/8" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1" | 1 1/4" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 1 1/8" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 1 1/4" | Press Fit | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
Ultra-Flexible Urethane Roller with Aluminum Hub | |||||||
| 4" | 1" | 3/4" | Press Fit | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1" | 1" | Press Fit | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 3/4" | Press Fit | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
| 4" | 2" | 1" | Press Fit | -40° to 180° | 40A (Soft) Yellow | 0000000 | 00000 |
Abrasion-Resistant Keyed Drive Rollers
These urethane rollers are wear and chemical resistant. They’re also nonmarring. Use them with a keyed shaft to prevent slippage in high-torque applications. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power.
Note: The hub on rollers with 1 1/2" to 4" roller diameter protrudes on one side only.
For technical drawings and 3-D models, click on a part number.
Roller | Keyway | Set Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Wd. | Dp. | Overall Wd. | Dynamic Radial Load Capacity, lbs. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Aluminum Hub | |||||||||||||
| 1 1/2" | 1 1/2" | 3/8" | 3/32" | 3/64" | 1 7/8" | Not Rated | Keyway, Set Screw | 2 | Yes | -20° to 200° | 80A (Hard) Black | 0000000 | 000000 |
| 1 1/2" | 1 1/2" | 1/2" | 1/8" | 1/16" | 1 7/8" | Not Rated | Keyway, Set Screw | 2 | Yes | -20° to 200° | 80A (Hard) Black | 0000000 | 00000 |
| 2" | 2" | 3/4" | 3/16" | 3/32" | 2 3/8" | Not Rated | Keyway, Set Screw | 2 | Yes | -20° to 200° | 80A (Hard) Black | 0000000 | 000000 |
| 2 1/2" | 2" | 3/4" | 3/16" | 3/32" | 2 3/8" | Not Rated | Keyway, Set Screw | 2 | Yes | -20° to 200° | 80A (Hard) Black | 0000000 | 000000 |
Urethane Roller with Steel Hub | |||||||||||||
| 3" | 2" | 1/2" | 1/8" | 1/16" | 3 1/4" | 300 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 3" | 2" | 3/4" | 3/16" | 3/32" | 3 1/4" | 300 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 00000 |
| 4" | 2" | 1/2" | 1/8" | 1/16" | 3 1/4" | 350 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 00000 |
| 4" | 2" | 3/4" | 3/16" | 3/32" | 3 1/4" | 350 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 5" | 2" | 1/2" | 1/8" | 1/16" | 2 3/16" | 400 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 5" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 400 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 6" | 2" | 1/2" | 1/8" | 1/16" | 2 3/16" | 425 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 6" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 425 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 6" | 3" | 1/2" | 1/8" | 1/16" | 3 1/4" | 800 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 6" | 3" | 3/4" | 3/16" | 3/32" | 3 1/4" | 800 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 6" | 3" | 1" | 1/4" | 1/8" | 3 1/4" | 1,600 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 6" | 3" | 1 1/4" | 1/4" | 1/8" | 3 1/4" | 1,600 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 8" | 2" | 1/2" | 1/8" | 1/16" | 2 3/16" | 500 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 8" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 500 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 8" | 3" | 1/2" | 1/8" | 1/16" | 3 1/4" | 800 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 8" | 3" | 3/4" | 3/16" | 3/32" | 3 1/4" | 800 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 8" | 3" | 1" | 1/4" | 1/8" | 3 1/4" | 1,600 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 8" | 3" | 1 1/4" | 1/4" | 1/8" | 3 1/4" | 1,600 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 10" | 3" | 3/4" | 3/16" | 3/32" | 3 1/4" | 800 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 10" | 3" | 1" | 1/4" | 1/8" | 3 1/4" | 1,600 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 10" | 4" | 1 1/2" | 3/8" | 3/16" | 4 1/4" | 2,500 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 10" | 5" | 1 1/2" | 3/8" | 3/16" | 5 1/4" | 2,500 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 12" | 4" | 1 1/2" | 3/8" | 3/16" | 4 1/4" | 3,000 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
Abrasion-Resistant Rollers
These urethane rollers are nonmarring and wear resistant. Mount them directly onto your shaft or build a custom roller by adding your own hub. Rollers with steel insert have a retaining ring groove for securing a ball bearing.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Shaft Mount Type | Temperature Range, ° F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller | |||||||
| 1" | 1/2" | 1/2" | Press Fit | -40° to 170° | 000000000 | 00000 | |
| 1 1/2" | 1/2" | 3/4" | Press Fit | -40° to 170° | 000000000 | 0000 | |
| 1 1/2" | 3/4" | 1/2" | Press Fit | -40° to 170° | 000000000 | 0000 | |
| 2" | 3/4" | 1" | Press Fit | -40° to 170° | 000000000 | 00000 | |
| 2 1/4" | 1" | 3/4" | Press Fit | -40° to 170° | 000000000 | 00000 | |
| 3" | 1" | 1" | Press Fit | -40° to 170° | 000000000 | 00000 | |
| 4" | 3/4" | 2" | Press Fit | -40° to 170° | 000000000 | 00000 | |
Urethane Roller with Steel Insert | |||||||
| 1 1/2" | 1 1/4" | 7/8" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 2" | 29/32" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 2" | 1 15/16" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 29/32" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 1 15/16" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 4" | 29/32" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
Abrasion-Resistant Low-Profile Drive Rollers
The mounting holes on these rollers are tapped directly through the roller’s surface so you can install them with set screws and still fit them into tight spots. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power. The urethane surface is nonmarring and wear resistant.
For technical drawings and 3-D models, click on a part number.
Roller | Set Screws | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Aluminum Hub | |||||||||
| 3/8" | 1/4" | 1/8" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 000000 | |
| 1/2" | 1/4" | 3/16" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/4" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/2" | 3/16" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/2" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 5/8" | 1/2" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/8" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 1/2" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1" | 1/2" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 1/4" | 1/4" | 5/16" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 1/4" | 3/4" | 5/16" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 5/8" | 1/4" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 5/8" | 3/4" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2" | 1/4" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2" | 3/4" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2 1/2" | 3/8" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2 1/2" | 1" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
Press-Fit Low-Profile Drive Rollers
Install these rollers without the need for set screws or keyways. With a nonprotruding hub, they fit where standard drive rollers can’t. Also known as contact wheels and feed rollers, drive rollers spin in unison with shaft or stud to transmit power. These urethane rollers are nonmarring and wear resistant.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Shaft Mount Type | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Aluminum Hub | |||||||
| 1/2" | 1/4" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 000000 |
| 1/2" | 3/8" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1/2" | 1/2" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 5/8" | 1/4" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 5/8" | 3/8" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 3/4" | 1/4" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 3/4" | 1/2" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 3/4" | 3/4" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1" | 1/4" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1" | 1/2" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1" | 3/4" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1" | 1" | 1/2" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1 1/4" | 1/4" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1 1/4" | 3/4" | 1/4" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1 1/4" | 1" | 1/2" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1 1/2" | 1/4" | 1/2" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1 1/2" | 3/4" | 1/2" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 1 1/2" | 1" | 1/2" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 2" | 1/4" | 1/2" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 2" | 1/2" | 1/2" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
| 2" | 1" | 1/2" | Press Fit | -40° to 180° | 55A (Medium) Black | 0000000 | 00000 |
Cut-to-Width Abrasion-Resistant Idler Rollers
Cut these rollers to the width you need using a band saw. You can also machine the surface to add a V-groove, U-channel, or fins to be used in any number of ways, from car wash rollers to package handling diverters. These rollers are urethane, so they’re nonmarring and resist wear.
Note: Do not cut with a circular saw.
For technical drawings and 3-D models, click on a part number.
