About Sealant Flexibility
More
About Structural Adhesives
More
About Paint and Protective Coatings
More
Waterproof Epoxy Structural Adhesives
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
ClearWeld and Plastic Bonder can be applied to wet surfaces.
WaterWeld and 11801, as well as one-time-use packets, can be applied to wet surfaces or under water.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/760/7605a18p1-b05-@halfx_637170256487425865.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/181/1813a221p1-@halfx_637170109500857711.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-stick3-digital@halfx_637048229168048676.png?ver=imagenotfound)
Mfr. Model | Container | Strength | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
ClearWeld | 50114 | 0.5 | __ | Syringe | 5 min. | 1 hrs. | 1,500 | __ | 1:1 | Paste | Not Rated to 300° | Clear | Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
ClearWeld | 50240H | 8 | __ | Tube | 5 min. | 1 hrs. | 1,500 | __ | 1:1 | Paste | Not Rated to 300° | Clear | Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
MarineWeld | 50172 | 0.85 | __ | Syringe | 5 min. | 1 hrs. | 1,800 | Not Rated | 1:1 | Paste (100,000 cP) | -20° to 300° | White | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 000000 | 0000 |
MarineWeld | 8272 | 2 | __ | Tube | 6 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 500° | Gray | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 0000 |
Plastic Bonder | 50133 | 0.85 | __ | Syringe | 15 min. | 30 min. | 1,700 | __ | 1:1 | Paste | Not Rated to 200° | Tan | Submersible | Plastic | 0000000 | 0000 |
WaterWeld | 8277 | __ | 2 | Stick | 25 min. | 60 min. | 900 | Not Rated | __ | Putty (Not Rated) | Not Rated to 300° | Off-White | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 0000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/760/7605a211-@halfx_637819164870383883.png?ver=imagenotfound)
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
11801 | 16 | Pail | 45 min. | 24 hrs. | 2,600 | 1:1 | Putty | 40° to 250° | Gray | Submersible | Metal, Plastic, Composites | 00000000 | 0000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/753/7538a12p2-b05-@halfx_637170248491922295.png?ver=imagenotfound)
Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Pkg. Qty. | Pkg. | |
0.1 | One-Time-Use Packet | 25 min. | 7 days | 2,200 | Not Rated | 2.5:1 | Thick Liquid (40,000 cP) | 0° to 220° | Gray | Salt Spray, Submersible | Metal, Composites, Masonry | 10 | 0000000 | 000000 |
Epoxy Structural Adhesives for Harsh Environments
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions. Epoxies are the strongest structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
E-120HP resists acetone, fuel, and oil. It bonds dissimilar materials and withstands rapid changes in temperature.
9430 bonds dissimilar materials and resists fuel and hydraulic fluid.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a216p1-b05-@halfx_637170213624727653.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/626/62695t86c2-b05-@halfx_637170943234876053.png?ver=imagenotfound)
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
Loctite® Adhesives | ||||||||||||||
E-120HP | 1.69 fl. oz. | Cartridge | 2 hrs. | 24 hrs. | 4,300 | Not Rated | 2:1 | Thick Liquid (30,000 cP) | -65° to 250° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber, Ceramic | 0000000 | 000000 |
E-120HP | 6.76 fl. oz. | Cartridge | 2 hrs. | 24 hrs. | 4,300 | Not Rated | 2:1 | Thick Liquid (30,000 cP) | -65° to 250° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber, Ceramic | 0000000 | 00000 |
E-120HP | 13.5 fl. oz. | Cartridge | 2 hrs. | 24 hrs. | 4,300 | Not Rated | 2:1 | Thick Liquid (30,000 cP) | -65° to 250° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber, Ceramic | 0000000 | 000000 |
9430 | 32 fl. oz. | Can | 50 min. | 5 days | 4,230 | 60 | 3.78:1 | Thick Liquid (12,000 cP) | -65° to 180° | Off-White | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 00000000 | 000000 |
9430 | 1.25 gal. | Can | 50 min. | 5 days | 4,230 | 60 | 3.78:1 | Thick Liquid (12,000 cP) | -65° to 180° | Off-White | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 00000000 | 000000 |
Adhesives | ||||||||||||||
__ | 1.69 fl. oz. | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (7,000 cP) | -50° to 350° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Rubber, Rubber to Composites, Composites | 000000 | 00000 |
__ | 1.69 fl. oz. | Cartridge | 40 min. | 24 hrs. | Not Rated | Not Rated | 2:1 | Thick Liquid (10,000 cP) | -65° to 350° | White | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Plastic | 000000 | 00000 |
Each | ||
Mixer Nozzle for 1.69 fl. oz. Cartridges | 00000000 | 00000 |
Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. Cartridges | 0000000 | 0000 |
Replacement Plunger for 13.5 fl. oz. Cartridges (2:1 Mix Ratio) | 00000000 | 0000 |
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges | 000000000 | 000000 |
Dispensing Gun for 1.69 fl. oz. Cartridges | 00000000 | 00000 |
Dispensing Gun for 6.76 fl. oz. Cartridges | 0000000 | 000000 |
Dispensing Gun for 13.5 fl. oz. Cartridges | 0000000 | 000000 |
Epoxy Structural Adhesive Assortments
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-epoxy-assortment-digital@halfx_637046267314296790.png?ver=imagenotfound)
Easily handle a variety of small jobs. Assortments include eight different epoxies in 0.1-oz. packets. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
Epoxy Type (For Joining) | Each | |
Easy Flowing (Composites, Metal) Fast Hardening (Masonry, Metal, Rubber) For Vertical Surfaces (Masonry, Metal, Wood) General Purpose (Masonry, Metal, Plastic, Rubber) High Strength (Metal, Rubber) Machinable Surface Filler (Composites, Metal) Optically Clear (Glass, Metal) Water Resistant (Composites, Masonry, Metal) | 0000000 | 000000 |
Submersible Anchoring Adhesives for Concrete
![](/prerenderstable/mvPRE/contents/gfx/imagecache/233/2337n11-@halfx_637502091040133675.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/749/7498a55p1-b05-digital@halfx_637045942241479233.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/233/2337n12-@halfx_637502101760905880.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/749/7498a56-@halfx_637487326207140031.png?ver=imagenotfound)
When concrete is saturated with or submerged in water, use these epoxies to permanently set threaded rods, studs, and rebar. They form a weather-resistant chemical bond that seals out moisture and resists vibration and dynamic loads better than mechanical anchors. Warning: Allowable pull-out strength is 25% of ultimate values or less, as required by building authorities. Use a mixer nozzle and dispensing gun (dispensing gun sold separately) to simultaneously mix and dispense adhesive.
Container Size, fl. oz. | Begins to Harden | Reaches Full Strength | No. of 1/2" Dia. Rods Set at 4 1/2" Installation Dp. | Ultimate Pull-Out Strength (in 4,000 psi Concrete) | Mix Ratio | Consistency | Temp. Range, °F | Color | Each | |
8.6 | 20 min. @ 75° F | 4 hrs. | 20 in 9/16'' dia. hole | 9,200 lbs.—3/8" Threaded Rod Dia. × 3 3/8" Installation Dp. 22,300 lbs.—1/2" Threaded Rod Dia. × 4 1/2" Installation Dp. 29,900 lbs.—5/8" Threaded Rod Dia. × 5 5/8" Installation Dp. 39,200 lbs.—3/4" Threaded Rod Dia. × 6 3/4" Installation Dp. 53,800 lbs.—7/8" Threaded Rod Dia. × 7 7/8" Installation Dp. 62,900 lbs.—1" Threaded Rod Dia. × 9" Installation Dp. 88,500 lbs.—1 1/4" Threaded Rod Dia. × 11 1/4" Installation Dp. | 1:1 | Paste | 35° to 110° | Gray | 0000000 | 000000 |
9.5 | 5 min. @ 70° F | 45 min. | 25 in 9/16" dia. hole | 10,900 lbs.—3/8" threaded rod dia. × 3 1/2" installation dp. 17,100 lbs.—1/2" threaded rod dia. × 4 1/2" installation dp. 26,500 lbs.—5/8" threaded rod dia. × 5 5/8" installation dp. 29,500 lbs.—3/4" threaded rod dia. × 6 3/4" installation dp. 44,500 lbs.—7/8" threaded rod dia. × 7 7/8" installation dp. 48,000 lbs.—1" threaded rod dia. × 9" installation dp. 56,500 lbs.—1 1/4" threaded rod dia. × 11 1/4" installation dp. | 10:1 | Paste | 15° to 110° | Gray | 0000000 | 00000 |
20.7 | 20 min. @ 75° F | 4 hrs. | 48 in 9/16'' dia. hole | 9,200 lbs.—3/8" Threaded Rod Dia. × 3 3/8" Installation Dp. 22,300 lbs.—1/2" Threaded Rod Dia. × 4 1/2" Installation Dp. 29,900 lbs.—5/8" Threaded Rod Dia. × 5 5/8" Installation Dp. 39,200 lbs.—3/4" Threaded Rod Dia. × 6 3/4" Installation Dp. 53,800 lbs.—7/8" Threaded Rod Dia. × 7 7/8" Installation Dp. 62,900 lbs.—1" Threaded Rod Dia. × 9" Installation Dp. 88,500 lbs.—1 1/4" Threaded Rod Dia. × 11 1/4" Installation Dp. | 1:1 | Paste | 35° to 110° | Gray | 0000000 | 00000 |
28 | 5 min. @ 70° F | 45 min. | 75 in 9/16" dia. hole | 10,900 lbs. —3/8" Threaded Rod Dia. × 3 3/8" Insulation Dp. 17,100 lbs.—1/2" threaded rod dia. × 4 1/2" installation dp. 26,500 lbs.—5/8" threaded rod dia. × 5 5/8" installation dp. 29,500 lbs.—3/4" threaded rod dia. × 6 3/4" installation dp. 44,500 lbs.—7/8" threaded rod dia. × 7 7/8" installation dp. 48,000 lbs.—1" threaded rod dia. × 9" installation dp. 56,500 lbs.—1 1/4" threaded rod dia. × 11 1/4" installation dp. | 10:1 | Paste | 15° to 110° | Gray | 0000000 | 00000 |
Dispensing Gun for 28 fl. oz. Cartridges | 0000000 | Each | 0000000 |
Replacement Mixer Nozzle for 28 fl. oz. Cartridges | 0000000 | Each | 0000 |
Replacement Mixer Nozzle for 8.6 fl. oz. Cartridges | 000000000 | Each | 0000 |
Dispensing Gun for 8.6 fl. oz. Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 20.7 fl. oz. Cartridges | 0000000 | Each | 000000 |
Replacement Mixer Nozzle for 20.7 fl. oz. Cartridges | 000000000 | Each | 0000 |
Dispensing Gun for 9.5 fl. oz. Cartridges | 00000000 | Each | 00000 |
Replacement Mixer Nozzle for 9.5 fl. oz. Cartridges | 00000000 | Each | 0000 |
Submersible Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/929/92930a450p1-b05-digital@halfx_636961270538874902.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-sausagepack-digital@halfx_636961263104796878.png?ver=imagenotfound)
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Sika Sikaflex sealants meet NSF/ANSI 61 safety standards for use with drinking water.
Silicone sealant is FDA compliant for direct contact with food. It will not harm fish, so it's safe for use in aquariums. It's also known as RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | Specifications Met | For Joining | Choose a Color | Each | |
3M Hybrid Polymer | |||||||||||||
4000UV | 3 | Tube | 25 min. | 24 hrs. | 700% | Not Rated | Medium Soft (Durometer 40A) | -40° to 190° | __ | Metal Metal to Composites Composites Wood | White | 00000000 | 000000 |
4000UV | 10 | Cartridge | 25 min. | 24 hrs. | 700% | Not Rated | Medium Soft (Durometer 40A) | -40° to 190° | __ | Metal Metal to Composites Composites Wood | White | 00000000 | 00000 |
4000UV | 20.3 | Sausage Pack | 30 min. | 24 hrs. | 700% | Not Rated | Medium Soft (Durometer 40A) | -40° to 190° | __ | Metal Metal to Plastic Metal to Composites Plastic Plastic to Composites Composites Wood | White | 00000000 | 00000 |
3M Polyurethane | |||||||||||||
4200 FC | 3 | Tube | 2 hrs. | 24 hrs. | 400% | Not Rated | Medium Soft (Durometer 40A) | -40° to 190° | __ | Metal Metal to Plastic Metal to Composites Metal to Glass Plastic Plastic to Composites Plastic to Glass Composites Glass Wood Wood to Glass | White | 00000000 | 00000 |
4200 FC | 10 | Cartridge | 2 hrs. | 24 hrs. | 400% | Not Rated | Medium Soft (Durometer 40A) | -40° to 190° | __ | Metal Metal to Plastic Metal to Composites Metal to Glass Plastic Plastic to Composites Plastic to Glass Composites Glass Wood Wood to Glass | 00000000 | 00000 | |
Sika Sikaflex Polyurethane | |||||||||||||
291 | 10.1 | Cartridge | 60 min. | 3 days | 500% | -12.5% to 12.5% | Medium Soft (Durometer 40A) | -40° to 190° | NSF/ANSI 61 | Metal | 000000 | 00000 | |
Silicone | |||||||||||||
__ | 2.8 | Tube | 5 min. | 48 hrs. | Not Rated | -25% to 25% | Not Rated | -40° to 400° | ASTM C920 Type S Grade NS Class 25, FDA Compliant 21 CFR 177.2600 | Metal Plastic Rubber Glass | Clear | 0000000 | 0000 |
__ | 10.3 | Cartridge | 20 min. | 24 hrs. | 500% | -25% to 25% | Soft (Durometer 26A) | -40° to 400° | ASTM C920 Type S Grade NS Class 25, FDA Compliant 21 CFR 177.2600 | Metal Glass Wood | 0000000 | 0000 |
Primer for Sika Sikaflex Sealants (3.4 fl. oz Bottle) | 0000000 | Each | 000000 |
Structural Submersible Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/929/92930a450p1-b05-digital@halfx_636961270538874902.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation indicates flexibility—the higher the values are, the more sealants can stretch. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
3M Polyurethane | ||||||||||||
5200FC | 3 | Tube | 60 min. | 24 hrs. | 900% | 600 | Medium Hard (Durometer 60A) | -40° to 190° | Metal Metal to Composites Composites Wood | White | 00000000 | 000000 |
5200 | 3 | Tube | 72 hrs. | 7 days | 700% | 700 | Hard (Durometer 68A) | -40° to 190° | Metal Metal to Composites Composites Wood | 00000000 | 00000 | |
5200FC | 10 | Cartridge | 60 min. | 24 hrs. | 900% | 600 | Medium Hard (Durometer 60A) | -40° to 190° | Metal Metal to Composites Composites Wood | White | 00000000 | 00000 |
5200 | 10 | Cartridge | 72 hrs. | 7 days | 700% | 700 | Hard (Durometer 68A) | -40° to 190° | Metal Metal to Composites Composites Wood | 00000000 | 00000 |
All-Weather Application Structural Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/929/92930a450p1-b05-digital@halfx_636961270538874902.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-sausagepack-digital@halfx_636961263104796878.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/296/2966k58p1-g02a-digital@halfx_636961293003340322.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/137/1378k36p1-g02a-digital@halfx_637074246167676223.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-white-spec-@halfx_637166702356627137.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-dark-bronze-spec-@halfx_637166702301477321.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-limestone-spec-@halfx_637166701969550702.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-tan-spec-@halfx_637166702299400414.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-black-spec-@halfx_637166701969600409.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/squ/square-gray-spec-@halfx_637166701969038483.png?ver=imagenotfound)
Apply these sealants in cold temperatures, on wet surfaces, and even through running water. They are structural sealants that combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | ||||||||||||
5 fl. oz. | Tube | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | White | 000000 | 00000 |
10.1 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 | |
20 fl. oz. | Sausage Pack | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
28 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
2 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 | |
5 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 |
All-Weather Application Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Apply these sealants on wet surfaces and in cold temperatures. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Sealants with 1,000% elongation can be applied through running water.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to the regions listed are restricted by local chemical regulations, including limits on VOC (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Cannot Be Sold To | Each | ||
Hybrid Polymer | |||||||||||||
9 | Cartridge | 10 min. | 3 days | 450% | -50% to 50% | Medium Soft (Durometer 44A) | -10° to 150° | Metal Metal to Glass Glass Masonry Wood Wood to Glass | Clear | __ | 000000000 | 000000 | 00 |
9 1/2 | Cartridge | 20 min. | 3 days | 570% | -50% to 50% | Soft (Durometer 32A) | -10° to 150° | Metal Metal to Glass Glass Masonry Wood Wood to Glass | Black | __ | 000000000 | 00000 | 00 |
9 1/2 | Cartridge | 20 min. | 3 days | 570% | -50% to 50% | Soft (Durometer 32A) | -10° to 150° | Metal Metal to Glass Glass Masonry Wood Wood to Glass | White | __ | 000000000 | 00000 | 00 |
Each | |||||||||||||
1-11 | 12-Up | ||||||||||||
10 | Cartridge | 1 sec. | 5 days | 870% | -25% to 25% | Soft (Durometer 20A) | -40° to 180° | Metal Masonry Wood | Clear | __ | 0000000 | 00000 | 000000 |
10 | Cartridge | 1 sec. | 5 days | 870% | -25% to 25% | Soft (Durometer 25A) | -40° to 180° | Metal Masonry Wood | White | CA, Canada | 0000000 | 00000 | 00000 |
10 | Cartridge | 5 min. | 14 days | Not Rated | -25% to 25% | Not Rated | -20° to 190° | Metal Metal to Plastic Plastic Asphalt Masonry Wood | White | CA | 0000000 | 00000 | 00000 |
10 | Cartridge | 10 min. | 24 hrs. | Not Rated | -25% to 25% | Not Rated | -65° to 190° | Metal Metal to Plastic Plastic Asphalt Masonry Wood | Clear | __ | 0000000 | 00000 | 00000 |
10 | Cartridge | 8 hrs. | 14 days | 550% | -25% to 25% | Soft (Durometer 22A) | -20° to 200° | Metal Metal to Plastic Metal to Composites Plastic Plastic to Composites Composites Masonry Wood | __ | 000000 | 00000 | 00000 | |
10.3 | Cartridge | 45 min. | 4 days | 1,000% | Not Rated | Soft (Durometer 25A) | -40° to 180° | Metal Plastic Rubber Asphalt Composites Glass Masonry Wood | CA, Canada | 000000 | 00000 | 00000 |
Optically Clear All-Weather Application Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics. Apply it in cold temperatures, on wet surfaces, and even through running water. The sealant is non-sagging, so it won't drip from vertical and overhead surfaces. It cannot be sold to the regions listed due to local regulatory limits on VOC (volatile organic compounds).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. This sealant is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Cannot Be Sold To | Each | |
Hybrid Polymer | ||||||||||||
10.3 | Cartridge | 45 min. | 4 days | 1,000% | 45 | Soft (Durometer 20A) | 40° to 140° | -40° to 180° | Metal Metal to Plastic Metal to Composites Metal to Glass Plastic Plastic to Composites Plastic to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CO; CT; DC; DE; MA; MD; ME; NJ; Northern VA; NY; PA; RI; UT; VT | 0000000 | 000000 |
Self-Leveling All-Weather Application Concrete Joint Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Apply these sealants on wet surfaces and in cold temperatures. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Sealants that begin to harden in 3 minutes are ideal for sealing pavement saw cuts made when installing buried sensing wires, also known as detector loops. You can walk or drive over the seams right away because they dry tack free within minutes.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.
They cannot be sold to the listed areas due to VOC (Volatile Organic Compounds) regulations.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Cannot Be Sold To | Each | |
Hybrid Polymer | |||||||||||||||
9 | Cartridge | 90 min. | 24 hrs. | 900% | -25% to 25% | Soft (Durometer 25A) | 1/2" | 1/2" | 20° to 120° | -40° to 200° | Masonry, Wood | Gray | __ | 0000000 | 000000 |
28 | Cartridge | 3 min. | 30 hrs. | 1,000% | Not Rated | Soft (Durometer 25A) | 1 1/2" | 3/4" | -20° to 120° | -60° to 350° | Asphalt, Concrete | CT, DC, DE, Los Angeles County, CA, MA, MD, ME, NJ, NOVA, NY, Orange County, CA, PA, RI, Riverside County, CA, San Bernardino County, CA, UT, VT | 0000000 | 00000 | |
28 | Cartridge | 45 min. | 48 hrs. | 400% | Not Rated | Soft (Durometer 25A) | 1" | 1" | 35° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | __ | 0000000 | 00000 |
All-Weather Application Concrete Joint Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Apply these sealants on wet surfaces and in cold temperatures. They're non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | |||||||||||||||
28 | Cartridge | 30 min. | 48 hrs. | 1,000% | -50% to 50% | 125 | Not Rated | 1" | 1" | 32° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
All-Weather Application Roof Joint Sealants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/765/7650t11p1-b05-digital@halfx_636961297160751660.png?ver=imagenotfound)
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater. They're non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Elongation indicates flexibility—the higher the value is, the more joint movement a sealant can sustain.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
Hybrid Polymer | ||||||||||||
10 | Cartridge | 30 min. | 24 hrs. | 559% | 235 | Soft (Durometer 33A) | 30° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Masonry | Black | 000000 | 000000 |
10 | Cartridge | 60 min. | 24 hrs. | 465% | 115 | Soft (Durometer 19A) | 30° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Masonry | White | 000000 | 00000 |
Water-Resistant Surface Fillers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/661/6617a21p1-b05-digital@halfx_636900017520120230.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/734/73475a12p2@halfx_637165867886686382.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-twopart-jarbottle-digital@halfx_636900006337719131.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-twopart-jar-digital@halfx_636900029123252869.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-twopart-canjar-digital@halfx_636900010195780991.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-twopart-can-digital@halfx_636900030172891653.png?ver=imagenotfound)
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Paste fillers resist alkalies, solvents, gasoline, and oil.
Container | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Net Weight, oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Specifications Met | Each | |
Loctite® Fixmaster Metal Magic Steel | ||||||||||||||||
EA 3463 | __ | 4 | Stick | 3 | 24 hrs. | Putty | __ | 10 sq. in. @ 1/4" | 1" | -20° to 250° | Gray | Sand | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | NSF/ANSI 61 | 0000000 | 000000 |
Loctite® Fixmaster Underwater Repair Epoxy | ||||||||||||||||
EA 9490 | __ | 4 | Stick | 15 | 60 min. | Putty | __ | 16 sq. in. @ 1/4" | 1/4" | Not Rated to 300° | White | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Concrete, Wood | __ | 0000000 | 00000 |
Surface Fillers | ||||||||||||||||
__ | 2 | __ | Tube | 5 | 60 min. | Paste | 1:1 | 12 sq. in. @ 1/4" | 1/2" | Not Rated to 200° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | __ | 0000000 | 00000 |
__ | 2 | __ | Jar, Bottle | 20 | 24 hrs. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | __ | 0000000 | 00000 |
__ | 2 | __ | Jar, Bottle | 20 | 24 hrs. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | __ | 0000000 | 00000 |
__ | 12 | __ | Jar | 30 | 24 hrs. | Paste | 1:1 | 85 sq. in. @ 1/4" | 1" | 50° to 210° | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | __ | 0000000 | 00000 |
__ | 14 | __ | Can, Jar | 20 | 24 hrs. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | __ | 0000000 | 00000 |
__ | 14 | __ | Can, Jar | 20 | 24 hrs. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | __ | 0000000 | 00000 |
__ | 24 | __ | Can | 30 | 24 hrs. | Paste | 1:1 | 170 sq. in. @ 1/4" | 1" | 50° to 210° | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | __ | 0000000 | 00000 |
__ | 48 | __ | Can | 30 | 24 hrs. | Paste | 1:1 | 340 sq. in. @ 1/4" | 1" | 50° to 210° | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | __ | 0000000 | 00000 |
Water-Resistant Surface Filler Kits
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/748/7480a51-@halfx_1682702063.png?ver=imagenotfound)
Includes | Formulation | Consistency | For Use Outdoors | Temp. Range, °F | Finishing Method | For Use On | Each | |
8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves | Epoxy | Thin Liquid | Yes | 35° to 130° | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, ABS Plastic, PVC Plastic, Fiberglass, Wood | 0000000 | 000000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Component | No. of Pieces | Mfr. Model No. | Size | Type | Lg. | Wd. | Each | |
Two-Part Epoxy | 6 | 101-TS | 0.6 fl. oz. | One-Time-Use Packet | __ | __ | 0000000 | 000000 |
Resin | 1 | 105 | 1 qt. | Can | __ | __ | 0000000 | 00000 |
Fast Hardener | 1 | 205 | 7 fl. oz. | Can | __ | __ | 0000000 | 00000 |
Slow Hardener | 1 | 206 | 7 fl. oz. | Can | __ | __ | 0000000 | 00000 |
Colloidal Silica Filler | 1 | 406 | 1.7 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
Colloidal Silica Filler | 1 | 406 | 5.5 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
Low-Density Filler | 1 | 410 | 5 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
Mini Dispensing Pump | 3 | 300 | __ | __ | __ | __ | 0000000 | 00000 |
Fiberglass Cloth | 1 | 745 | __ | __ | 30" | 30" | 0000000 | 00000 |
Surface Fillers for Fabric-Covered Neoprene Foam
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-tube-microdrop-digital@halfx_636964417055387160.png?ver=imagenotfound)
Waterproof and strong, these surface fillers remain flexible when repairing rips, tears, and holes in neoprene rubber. They're often used on wetsuits.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use Outdoors | For Use On | Each | |
2 | Tube | Thin Liquid | 20 | 8 | -30° to 200° | Clear | Yes | Neoprene Foam | 00000000 | 000000 |
Structural Support Epoxies for Heavy Machinery
![](/prerenderstable/mvPRE/contents/gfx/imagecache/967/96721a110-@halfx_637068092064285770.png?ver=imagenotfound)
Fill the void beneath motors, pumps, and other large machinery to create a structural support for your equipment. Also known as chocking epoxies, these epoxies replace traditional metal chocks, which often need to be machined. Mix these two-part epoxies and pour them in between your equipment and your base—they flow into every nook and cranny for a strong, long-lasting bond. As these epoxies cure, they won’t shrink. Designed to withstand demanding environments, these epoxies handle heavy loads, vibration, and chemicals without cracking. Especially good for harsh marine applications, you can use them when installing marine engines and deck-supported equipment, such as hoists and winches.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Net Weight, lbs. | Type | Consistency | Viscosity, cP | Color | Begins to Harden, min. | Reaches Full Strength, hrs. | Approx. Coverage @ Thick. | Mix Ratio | Temp. Range, °F | Each | |
Loctite® PC 7202 | |||||||||||
7 | Can | Thick Liquid | 15,000 | Orange | 10 | 24 | 123.2 sq. in. @ 1" | 100:11.6 | -20° to 250° | 000000000 | 0000000 |
21 1/2 | Pail | Thick Liquid | 15,000 | Orange | 10 | 24 | 378.4 sq. in. @ 1" | 100:11.6 | -20° to 250° | 000000000 | 000000 |
Footwear Repair Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/526/5268t32p1-i01a-digital@halfx_637068232723465408.png?ver=imagenotfound)
Repair rips, split seams, and detached soles to stop leaks in shoes, boots, and waders. These polyurethane adhesives create a strong, flexible seal that keeps water out, so they’re also used to coat seams. Use on leather, plastic, and rubber. They fully harden in 10 hours and dry clear.
Material | Color | Clarity | Consistency | Container Size, fl. oz. | Container Type | Begins to Harden | Reaches Full Strength | Mixing Required | Each | |
Polyurethane Epoxy | Clear | Clear | Thick Liquid | 0.75 | Tube | 60 min. | 10 hrs. | No | 0000000 | 00000 |
Shoe and Boot Protective Epoxy Coatings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/234/2344t1p2-i01a-@halfx_637157301838236072.png?ver=imagenotfound)
Extend the life of your footwear with these abrasion- and water-resistant epoxies. Stronger and more durable than most footwear materials, these epoxies are often used to coat and repair high-wear areas prone to rips, cracks, and water exposure, such as safety toes. They permanently bond to leather, plastic, and rubber. Each cartridge includes enough epoxy to coat the toes on one pair of shoes or boots. They fully harden in 24 hours and dry with a gloss finish, which can be rubbed away for a matte finish.
Submersible Polyurethane Coatings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-can-gallon-@halfx_637159023366004089.png?ver=imagenotfound)
These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications. Apply with a brush, roller, or sprayer.
Thinners cannot be sold to the listed areas due to VOC (Volatile Organic Compounds) regulations.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Touch, hrs. | O'all, hrs. | Approximate Coverage @ Thickness | Max. Temp., °F | Application Temp. Range, °F | For Use On | Primer Required For Use On | Color (Appearance) | Each | |
1 | Solvent Based | 2 | 6 | 224 sq. ft. @ 5 mil | 150° | 20° to 100° | Aluminum, Steel, Concrete, Galvanized Iron, Galvanized Steel | Steel | Black (Flat) | 0000000 | 0000000 |
Submersible Epoxy Coatings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-can-gallon-quart-@halfx_637159021469921352.png?ver=imagenotfound)
Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water; not for use with drinking water. Apply with a sprayer. The size listed is the combined total of the two parts. Coatings cannot be sold to the regions listed due to local regulatory limits on VOC (volatile organic compounds).
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Touch, hrs. | O'all, hrs. | Approximate Coverage @ Thickness | Mix Ratio | Application Time After Mixing, hrs. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | Cannot Be Sold To | Each | |
1 1/4 | Solvent Based | 4 | 18 | 100 sq. ft. @ 8 mil | 4:1 | 2 | 350° | 50° to 100° | Steel, Concrete | Black (Semi-Gloss) | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 0000000 |
Thinner (1 gal. Can) | 0000000 | Each | 000000 |