This light has two UV bulbs and two fluorescent bulbs that work independently of each other. The combination of UV light and magnifying lens lets you see the smallest traces of fluorescence while inspecting. This light cannot be sold to Canada due to local regulations on mercurcy content.

This versatile light can be secured in the stand or removed for hand-held use. A switch lets you select between UV and white fluorescent light. These lights cannot be sold to Canada due to local regulations on mercury content.

Designed for UV curing of small areas, these lamps also aid in leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulatory limits on mercury content.

Set the lamp on a bench top and the 360° rotating head directs light where you need it. It cannot be sold to Canada due to local regulatory limits on mercury content.

An optional lens filter (sold separately) lets you see extra-fine particles by reducing glare and the output of visible light.

Cover large areas with this long lamp. Use for UV curing as well as leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulations on mercury content.

Use these lamps for UV curing as well as leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulatory limits on mercury content.

Safely cure light-activated adhesives, coatings, and ink or strengthen 3D-printed resin parts with UV light in these enclosed chambers. Also known as flood curing, they evenly cure your parts. They work just like a microwave. Plug them in, set your time, and they’re ready to cure.

Chambers with a turntable are ideal for large and intricate 3D printed parts. The turntable rotates parts under the lights for even exposure while curing. Because these chambers use low-intensity LED bulbs and only operate when the door is closed, additional UV-protective glasses or clothing while using them are not required.

Chambers with a shelf create a deep, consistent cure and work best with small and flat parts. You can position parts closer to the bulb with the adjustable shelf for a faster curing. An automatic lamp shutter covers and reduces power to the bulb when you open the door. You should always wear UV-protective glasses and clothing when the system is turned on because of their high-intensity light. To remotely monitor and control these chambers, connect them to a computer or PLC.

Chambers and replacement bulbs that cannot be sold to Canada are restricted by regulations on limiting mercury content.

For technical drawings and 3-D models, click on a part number.

Detect UV-reflective materials that are invisible to the naked eye with these bulbs. They contain a blue filter that absorbs the visible light they produce while allowing long wave ultraviolet (UV-A) light to pass through. They appear black when turned off. These bulbs are not for use in bug zappers. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Bulbs cannot be sold to the listed areas because they exceed local regulatory limits on mercury.

Disinfect and sterilize air, water, and surfaces with short wave ultraviolet radiation. Ultraviolet radiation is harmful to skin and eyes; only install bulbs in fixtures that provide adequate protection. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Bulbs cannot be sold to Canada due to import regulations.

Wire terminals allow you to connect these bulbs to a power source through a panel. These bulbs are sized to fit into tight spaces such as signs, instruments, indicators, and flashlights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

Ultraviolet LED bulbs are often used to sterilize surfaces, cure adhesives, and detect leaks. Ultraviolet light is invisible to the human eye.

For technical drawings and 3-D models, click on a part number.

Disinfect phones, door knobs, masks, and other small objects. Using ultraviolet germicidal irradiation (UVGI), these portable lamps kill viruses, bacteria, and other microbes in seconds. Lightweight with a durable plastic housing, they’re designed to be carried from place to place. To guard from UV rays, wear eye protection and cover exposed skin while disinfecting.

These lamps cannot be sold to Canada due to import regulations.

For technical drawings and 3-D models, click on a part number.

Mount these lamps to a ceiling or wall to disinfect lab tools, respirators, and small surfaces such as countertops. These lamps kill viruses, bacteria, and other microbes with ultraviolet germicidal irradiation (UVGI). They’re commonly used in areas that could be damaged by liquid cleaners or chemical disinfectants.

Always wear eye and skin protection when operating. Since these lamps don’t produce ozone, it’s safe to enter the disinfected area as soon as they’re turned off. For best results, replace the bulbs after 1,000 hours of use.

These lamps cannot be sold to Canada due to import regulations.

For technical drawings and 3-D models, click on a part number.

These chambers kill viruses, bacteria, and other microbes with ultraviolet germicidal irradiation (UVGI). Use them to disinfect small items, especially those that could be damaged by liquid chemical cleaners. They’re enclosed to protect users, with a UV-blocking window and an auto shut-off function if the door is opened while they’re running. Similar to microwaves, these chambers let you adjust energy and time settings based on what you’re putting inside. Program up to 10 presets to save time when disinfecting with frequently used settings. A built-in radiometer monitors UV levels, making sure the correct level of UVGI energy is delivered even as the bulbs age. Bulbs should be replaced after 5,000 hours of use.

These chambers cannot be sold to Canada due to import regulations.

For technical drawings and 3-D models, click on a part number.

Keep your hands free by wearing a flashlight on your head. These headlamps have long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. An included strap secures the lamp to your head and adjusts for a comfortable fit.

Headlamps with a uniform beam are especially good for close-up tasks and inspection work. Use headlamps with ultraviolet LED lights for fluorescent leak detection in HVAC-R systems.

IP04 rated headlamps withstand liquid splashed from all angles but have not been tested against dust. Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.