About Plastic
More
About Hose
More
Wear-Resistant Low-Pressure Chemical Hose
- Temperature Range: -40° to 160° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: UHMW Polyethylene with EPDM Rubber Cover
- Color: Green with Purple Stripe
- Compatible Hose Fittings: Cam-and-Groove.
Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.
For technical drawings and 3-D models, click on a part number.
Per Ft. | |||||||
|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Max. Pressure | Max. Continuous Lg., ft. | 1-49 | 50-Up | |
| 3/4" | 1 3/16" | 4" | 200 psi @ 72° F | 50 | 0000000 | 000000 | 000000 |
| 1" | 1 9/16" | 5 1/2" | 200 psi @ 72° F | 50 | 0000000 | 00000 | 00000 |
| 1 1/4" | 1 7/8" | 6" | 200 psi @ 72° F | 50 | 0000000 | 00000 | 00000 |
| 1 1/2" | 2 1/8" | 7 1/2" | 200 psi @ 72° F | 50 | 0000000 | 00000 | 00000 |
| 2" | 2 5/8" | 8" | 200 psi @ 72° F | 50 | 0000000 | 00000 | 00000 |
| 2 1/2" | 3 1/8" | 8" | 200 psi @ 72° F | 50 | 0000000 | 00000 | 00000 |
| 3" | 3 5/8" | 9" | 200 psi @ 72° F | 50 | 0000000 | 00000 | 00000 |
| 4" | 4 11/16" | 15" | 150 psi @ 72° F | 50 | 0000000 | 00000 | 00000 |
Wear-Resistant Low-Pressure Chemical
Hose with Cam-and-Groove Socket and Plug
- Temperature Range: -40° to 160° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: UHMW Polyethylene with EPDM Rubber Cover
- Color: Green with Purple Stripe
Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle. To connect fittings, insert the plug into the socket and push the levers down.
For technical drawings and 3-D models, click on a part number.
Wet-Food and Beverage Hose for High Alcohol Content
- Temperature Range: -30° to 210° F
- Maximum Vacuum: 26" of Hg @ 72° F
- Material: UHMW Polyethylene
- Color: Green
- Compatible Hose Fittings: Quick-Clamp Sanitary
Suction, transfer, and dispense wet food and beverages with up to 99% alcohol concentrations. This hose is FDA compliant and 3-A certified, so it’s safe to use with liquors, acidic beverages, and distillation byproducts. Made of UHMW polyethylene, it won't impart tastes or odors on your product. Also called distillery hose, it’s easy to clean and won’t wear down or leave marks if dragged. It’s also oil, chemical, and ozone resistant. The interior of the hose is reinforced with yarn and steel, so it holds its shape when attached to a vacuum pump.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Bend Radius | Max. Pressure | Specifications Met | Max. Continuous Lg., ft. | Per Ft. | |
| 1" | 1 1/2" | 4" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 50 | 0000000 | 000000 |
| 1 1/2" | 2" | 6" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 50 | 0000000 | 00000 |
| 2" | 2 1/2" | 8" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 50 | 0000000 | 00000 |
Wet-Food and Beverage Hose for High Alcohol
Content with Quick-Clamp Sanitary Fittings
- Temperature Range: -30° to 210° F
- Maximum Vacuum: 26" of Hg @ 72° F
- Material: UHMW Polyethylene
- Color: Green
Easily access lines that move highly alcoholic or acidic wet food and beverages—this hose has flanged ends that join with quick-clamp fittings. Also known as distillery hose, this hose is UHMW polyethylene, so it won't crack or degrade while moving liquid with a 99% alcohol concentration. It also won’t impart tastes or odors on the contents of your line. This hose is FDA compliant and its fittings are 3-A certified, so it’s safe to use with food. Both the hose and fittings stand up to repeated rinsing with water and mild chemicals, making it a good choice for food and beverage processing environments. The hose also won’t wear down or leave marks if dragged, become brittle from oil, or break down from ozone. Reinforced with yarn and steel wire, this hose holds its shape and won’t collapse when hooked up to a vacuum pump.
The fittings are also known as tri-clamp fittings. Attach them to other quick-clamp fittings with a gasket and a clamp.
For technical drawings and 3-D models, click on a part number.
| Flange OD | ID | OD | Bend Radius | Max. Pressure | Specifications Met | 5 ft. | 10 ft. | 15 ft. | 20 ft. | |
316 Stainless Steel Quick-Clamp Sanitary × 316 Stainless Steel Quick-Clamp Sanitary | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1.984" × 1.984" | 1" | 1 1/2" | 4" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 0000000 | ||||
| 1.984" × 1.984" | 1 1/2" | 2" | 6" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 0000000 | ||||
| 2.516" × 2.516" | 2" | 2 1/2" | 8" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 0000000 | ||||
Slippery UHMW Polyethylene Tubes
These impact- and wear-resistant tubes offer 360° protection from scrapes and strikes to wires, cords, and anything that can slide through them. UHMW has a low-friction surface that resists sticking and binding.
Tubes with an oversized OD also have an undersized ID for finishing to the sizes listed.
Tight-tolerance tubes, also known as bushing stock, slide over rods and inside shafts to increase or decrease the diameter. Their precise sizing allows ascending sizes to fit inside each other to create a thicker wall.
For technical drawings and 3-D models, click on a part number.
- Color: White
- Temperature Range: -20° to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, FDA Compliant 21 CFR 177.1520, UL 94 HB
| OD | OD Tolerance | ID | ID Tolerance | Lengths, ft. | Per Ft. | |
1/8" Wall Thick. | ||||||
|---|---|---|---|---|---|---|
| 2" | Not Rated | 1 3/4" | Not Rated | 0000000 | 000000 | |
3/16" Wall Thick. | ||||||
| 1 3/8" | Not Rated | 1" | Not Rated | 0000000 | 00000 | |
| 1 5/8" | Not Rated | 1 1/4" | Not Rated | 0000000 | 00000 | |
| 2 1/4" | Not Rated | 1 7/8" | Not Rated | 0000000 | 00000 | |
| 2 5/8" | Not Rated | 2 1/4" | Not Rated | 0000000 | 00000 | |
| 3 1/8" | Not Rated | 2 3/4" | Not Rated | 0000000 | 00000 | |
1/4" Wall Thick. | ||||||
| 1" | Not Rated | 1/2" | Not Rated | 0000000 | 00000 | |
| 1 1/2" | Not Rated | 1" | Not Rated | 0000000 | 00000 | |
| 2" | Not Rated | 1 1/2" | Not Rated | 0000000 | 00000 | |
| 2 1/4" | Not Rated | 1 3/4" | Not Rated | 0000000 | 00000 | |
| 2 1/2" | Not Rated | 2" | Not Rated | 0000000 | 00000 | |
| 3" | Not Rated | 2 1/2" | Not Rated | 0000000 | 00000 | |
| 3 1/2" | Not Rated | 3" | Not Rated | 0000000 | 00000 | |
| 4" | Not Rated | 3 1/2" | Not Rated | 0000000 | 00000 | |
| 4 1/2" | Not Rated | 4" | Not Rated | 0000000 | 00000 | |
| 5" | Not Rated | 4 1/2" | Not Rated | 0000000 | 00000 | |
| 6 1/4" | Not Rated | 5 3/4" | Not Rated | 0000000 | 00000 | |
5/16" Wall Thick. | ||||||
| 7/8" | Not Rated | 1/4" | Not Rated | 0000000 | 00000 | |
| 1 1/4" | Not Rated | 5/8" | Not Rated | 0000000 | 00000 | |
| 1 3/8" | Not Rated | 3/4" | Not Rated | 0000000 | 00000 | |
| 1 7/8" | Not Rated | 1 1/4" | Not Rated | 0000000 | 00000 | |
| 2 3/8" | Not Rated | 1 3/4" | Not Rated | 0000000 | 00000 | |
3/8" Wall Thick. | ||||||
| 1 3/8" | Not Rated | 5/8" | Not Rated | 0000000 | 00000 | |
| 2 3/4" | Not Rated | 2" | Not Rated | 0000000 | 00000 | |
| 8 5/8" | Not Rated | 7 7/8" | Not Rated | 0000000 | 00000 | |
1/2" Wall Thick. | ||||||
| 1 1/2" | Not Rated | 1/2" | Not Rated | 0000000 | 00000 | |
| 2" | Not Rated | 1" | Not Rated | 0000000 | 00000 | |
| 2 1/2" | Not Rated | 1 1/2" | Not Rated | 0000000 | 00000 | |
| 3" | Not Rated | 2" | Not Rated | 0000000 | 00000 | |
| 3 1/2" | Not Rated | 2 1/2" | Not Rated | 0000000 | 00000 | |
| 4" | Not Rated | 3" | Not Rated | 0000000 | 00000 | |
- Color: White
- Temperature Range: -20° to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020
6" Lg. | |||||
|---|---|---|---|---|---|
| OD | OD Tolerance | ID | ID Tolerance | Each | |
1/4" Wall Thick. (-0.06" to 0") | |||||
| 3/4" | -0.030" to 0.000" | 1/4" | 0.000" to 0.030" | 0000000 | 000000 |
| 1 1/4" | -0.030" to 0.000" | 3/4" | 0.000" to 0.030" | 0000000 | 00000 |
| 1 3/4" | -0.030" to 0.000" | 1 1/4" | 0.000" to 0.030" | 0000000 | 00000 |
| 2 1/4" | -0.030" to 0.000" | 1 3/4" | 0.000" to 0.030" | 0000000 | 00000 |
| 2 3/4" | -0.030" to 0.000" | 2 1/4" | 0.000" to 0.030" | 0000000 | 00000 |
| 3 1/4" | -0.030" to 0.000" | 2 3/4" | 0.000" to 0.030" | 0000000 | 00000 |
| 3 3/4" | -0.030" to 0.000" | 3 1/4" | 0.000" to 0.030" | 0000000 | 00000 |
T-Slotted Framing Caps, Covers, and Seals
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
For technical drawings and 3-D models, click on a part number.
Wear strip covers slide into a T-slot to provide a slippery, abrasion-resistant surface. 90° angle covers create a side barrier that acts as a guide rail where there isn’t room for another rail.
Covers with static control prevent electrostatic discharge from building up, protecting sensitive electronic equipment.
For Rail Ht. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Lg. | Projection | Edge Ht. | Material | Safety Properties | Color | Each | |
Flat | |||||||||||
| 1", 25mm | 2", 50mm | 3" | 0.256" | 3 ft. | 3/16" | __ | UHMW Plastic | __ | White | 00000000 | 000000 |
| 1", 25mm | 2", 50mm | 3" | 0.256" | 6 ft. | 3/16" | __ | UHMW Plastic | __ | White | 0000000 | 00000 |
| 1 | 3" | 4 | 0.32" | 3 ft. | 1/4" | __ | UHMW Plastic | __ | White | 000000000 | 00000 |
| 1 | 3" | 4 | 0.32" | 6 ft. | 1/4" | __ | UHMW Plastic | __ | White | 000000000 | 00000 |
| 40mm | 80mm | 120mm | 8mm | 3 ft. | 1/4" | __ | UHMW Plastic | __ | White | 00000000 | 00000 |
| 40mm | 80mm | 120mm | 8mm | 6 ft. | 1/4" | __ | UHMW Plastic | __ | White | 00000000 | 00000 |
| 40mm | 80mm | 120mm | 8mm | 6 | 5/32" | __ | UHMW Plastic | Static Control | Black | 00000000 | 00000 |
90° Angle | |||||||||||
| 40mm | 80mm | 120mm | 8mm | 6 | 15/16" | 13/16" | UHMW Plastic | Static Control | Black | 00000000 | 00000 |