UHMW Polyethylene Channels

Filter by

Material

Shape

System of Measurement

Inside Width

Outside Width

Wall Thickness

Inside Height

Outside Height

Profile Shape

Performance

Electrically Insulating

For Use With

Acetic Acid (White Vinegar)

Length

Flexibility

Color

Outside Corner Shape

Texture

Width

Mount Type

Inside Corner Shape

Leg Edge Shape

Environment

Relative Friction Rating

REACH

RoHS

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Forward

How can we improve?

58 Products

About Plastic

About Durometer Hardness Scales

T-Slotted Framing Caps, Covers, and Seals

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

For technical drawings and 3-D models, click on a part number.

Wearstrip Covers

Flat

90° Angle

Wear strip covers slide into a T-slot to provide a slippery, abrasion-resistant surface. 90° angle covers create a side barrier that acts as a guide rail where there isn’t room for another rail.

Covers with static control prevent electrostatic discharge from building up, protecting sensitive electronic equipment.

For Rail Ht.
Single	Double, Quad	Triple	For T-Slot Wd.	Lg.	Projection	Edge Ht.	Material	Safety Properties	Color		Each
Flat
1", 25mm	2", 50mm	3"	0.256"	3 ft.	3/16"	__	UHMW Plastic	__	White	00000000	000000
1", 25mm	2", 50mm	3"	0.256"	6 ft.	3/16"	__	UHMW Plastic	__	White	0000000	00000
1 1/2"	3"	4 1/2"	0.32"	3 ft.	1/4"	__	UHMW Plastic	__	White	000000000	00000
1 1/2"	3"	4 1/2"	0.32"	6 ft.	1/4"	__	UHMW Plastic	__	White	000000000	00000
40mm	80mm	120mm	8mm	3 ft.	1/4"	__	UHMW Plastic	__	White	00000000	00000
40mm	80mm	120mm	8mm	6 ft.	1/4"	__	UHMW Plastic	__	White	00000000	00000
40mm	80mm	120mm	8mm	6 1/2 ft.	5/32"	__	UHMW Plastic	Static Control	Black	00000000	00000
90° Angle
40mm	80mm	120mm	8mm	6 1/2 ft.	15/16"	13/16"	UHMW Plastic	Static Control	Black	00000000	00000

Slippery UHMW Polyethylene U-Channels

Color: White
Temperature Range: -20° F to 180° F
Tensile Strength: 4,350-5,800 psi (Poor)
Impact Strength: 16.8 ft.-lbs./in. (Excellent)
Hardness: Durometer 65D-67D (Medium)
For Use Outdoors: No
Specifications Met: ASTM D4020, ASTM D4976, ASTM D6712, FDA Compliant 21 CFR 177.1520

Fabricate frames and parts for use in areas where scuffs, scrapes, and strikes are a factor. These UHMW U-channels have a slippery surface and excellent abrasion, wear, and impact resistance.

For technical drawings and 3-D models, click on a part number.

Outside				Inside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.	Lengths, ft.		Per Ft.
1/8" Wall Thick.
3/4"	-0.030" to 0.030"	1 1/4"	-0.030" to 0.030"	5/8"	1"	2, 5, 8	0000000	00000
1/4" Wall Thick.
3/4"	-0.030" to 0.030"	1"	-0.030" to 0.030"	3/8"	1/2"	2, 5, 8	0000000	0000
7/8"	-0.030" to 0.030"	1 1/2"	-0.030" to 0.030"	1/2"	1"	2, 5, 8	0000000	0000
1"	-0.080" to 0.080"	2"	-0.030" to 0.030"	5/8"	1 1/2"	2, 5, 8	0000000	0000
1"	-0.030" to 0.030"	2 1/2"	-0.030" to 0.030"	5/8"	2"	2, 5, 8	0000000	0000
1"	-0.030" to 0.030"	3"	-0.053" to 0.053"	5/8"	2 1/2"	2, 5, 8	0000000	00000
3/8" Wall Thick.
1"	-0.020" to 0.020"	3"	-0.030" to 0.030"	5/8"	2 1/4"	2, 5, 8	0000000	00000
1 1/4"	-0.030" to 0.030"	4 1/4"	-0.050" to 0.050"	7/8"	3 1/2"	2, 5, 8	0000000	00000

Slippery UHMW Polyethylene 90° Angles

Color: White
Temperature Range: -20° F to 180° F
Tensile Strength: 4,350-5,800 psi (Poor)
Impact Strength: 16.8 ft.-lbs./in. (Excellent)
Hardness: Durometer 65D-67D (Medium)
For Use Outdoors: No
Specifications Met: ASTM D4020, FDA Compliant 21 CFR 177.1520

Often used to fabricate frames and protect corners from impact, these UHMW 90° angles have a slippery surface that stands up to scuffs, scrapes, and strikes.

For technical drawings and 3-D models, click on a part number.

Outside				Inside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.	Lengths, ft.		Per Ft.
1/8" Wall Thick. (-0.060" to 0.060")
1"	-0.060" to 0.060"	1"	-0.060" to 0.060"	7/8"	7/8"	2, 5, 8, 10	0000000	00000
1 1/2"	-0.060" to 0.060"	1 1/2"	-0.060" to 0.060"	1 3/8"	1 3/8"	2, 5, 8, 10	0000000	0000
2"	-0.060" to 0.060"	2"	-0.060" to 0.060"	1 7/8"	1 7/8"	2, 5, 8, 10	0000000	0000
1/4" Wall Thick. (-0.060" to 0.060")
5/8"	-0.060" to 0.060"	1 1/2"	-0.060" to 0.060"	3/8"	1 1/4"	2, 5, 8, 10	0000000	0000
1 1/2"	-0.060" to 0.060"	1 1/2"	-0.060" to 0.060"	1 1/4"	1 1/4"	2, 5, 8, 10	0000000	0000
2"	-0.060" to 0.060"	2"	-0.060" to 0.060"	1 3/4"	1 3/4"	2, 5, 8, 10	0000000	0000
1/2" Wall Thick. (-0.060" to 0.060")
3"	-0.060" to 0.060"	3"	-0.060" to 0.060"	2 1/2"	2 1/2"	2, 5, 8, 10	0000000	00000
3 1/2"	-0.060" to 0.060"	3 1/2"	-0.060" to 0.060"	3"	3"	2, 5, 8, 10	0000000	00000

Slippery Plastic Trim

With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant. All of this trim has a hard rating to withstand high levels of impact. It's also nonmarking.

Very flexible trim can be bent around tight corners.

Adhesive-back trim allows for easy installation. Made of UHMW and PEEK, it has good wear resistance.

For technical drawings and 3-D models, click on a part number.

Style 7—Adhesive Back

Outside
Wd. (C)	Ht. (D)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Length, ft.		Each
UHMW Plastic
1/2"	0.022"	Very Flexible	Hard	0° to 120°	No	Yes	Semi-Clear White	15	0000000	00000
1"	0.022"	Very Flexible	Hard	0° to 120°	No	Yes	Semi-Clear White	15	0000000	00000
2"	0.022"	Very Flexible	Hard	0° to 120°	No	Yes	Semi-Clear White	15	0000000	00000
6"	0.022"	Very Flexible	Hard	0° to 120°	No	Yes	Semi-Clear White	3	0000000	00000
12"	0.022"	Very Flexible	Hard	0° to 120°	No	Yes	Semi-Clear White	3	0000000	00000

Food Industry Plastic Trim

This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications. This trim has a hard rating to withstand high levels of impact. It's also nonmarking.

UHMW trim has better wear resistance than nylon and vinyl trim.

Rigid trim is for use on straights. Push-on trim fits onto an edge and it grips on three sides for a tight hold.

Screw-in trim requires drilling mounting holes and securing it with fasteners.

Style 4 can be used outdoors.

For technical drawings and 3-D models, click on a part number.

Style 1—Push On

Inside		Outside										Per Ft.
Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Flexibility	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Specifications Met	Available Lengths, ft.		1-99	100-Up
UHMW Plastic—Hard
1/8"	1/4"	9/32"	11/32"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	00000	00000
5/32"	23/64"	39/64"	51/64"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	0000	0000
1/4"	3/8"	1/2"	1/2"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	0000	0000
5/16"	3/8"	1/2"	1/2"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	0000	0000
3/8"	1/2"	3/4"	5/8"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	0000	0000

Style 2—Push On

Inside		Outside										Per Ft.
Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Flexibility	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Specifications Met	Available Lengths, ft.		1-99	100-Up
UHMW Plastic—Hard
1/8"	3/8"	5/16"	1/2"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	00000	00000

Style 4—Screw In

Inside		Outside										Per Ft.
Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Flexibility	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Specifications Met	Available Lengths, ft.		1-7	8-Up
UHMW Plastic—Hard
1"	39/64"	1 1/4"	47/64"	Rigid	-20° to 180°	Yes	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8	0000000	00000	00000
2 1/2"	5/8"	3"	1"	Rigid	-20° to 180°	Yes	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8	0000000	0000	0000
3 1/2"	7/8"	4 1/4"	1 1/4"	Rigid	-20° to 180°	Yes	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8	0000000	00000	00000

Style 5—Push On

Inside		Outside										Per Ft.
Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Flexibility	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Specifications Met	Available Lengths, ft.		1-99	100-Up
UHMW Plastic—Hard
13/64"	3/8"	17/32"	3"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	00000	00000
1/4"	3/8"	17/32"	1"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	0000	0000

Style 7—Push On

Inside		Outside											Per Ft.
Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Opening Wd. (E)	Flexibility	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Specifications Met	Available Lengths, ft.		1-7	8-Up
UHMW Plastic—Hard
1"	1/4"	1 1/4"	1/2"	5/8"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8	0000000	00000	00000
													1-9	10-Up
1"	1"	1 1/4"	1 1/4"	1/2"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8, 10	0000000	0000	0000
													1-7	8-Up
1 1/2"	1/2"	1 11/16"	11/16"	1 3/64"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8	0000000	0000	0000
2"	1/4"	2 3/16"	13/32"	1 3/8"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8	0000000	0000	0000
2"	1 1/2"	2 1/4"	1 3/4"	1 1/2"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8	0000000	00000	00000

Style 8—Push On

	Outside											Per Ft.
Inside Wd. (A)	Wd. (C)	Ht. (D)	Opening Wd. (E)	Flexibility	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Specifications Met	Available Lengths, ft.		1-99	100-Up
UHMW Plastic—Hard
35/64"	47/64"	27/64"	19/64"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	00000	00000
5/8"	13/16"	17/32"	3/8"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	0000	0000
3/4"	15/16"	19/32"	1/2"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	0000	0000

Style 9—Push On

	Outside												Per Ft.
Inside Wd. (A)	Wd. (C)	Ht. (D)	Opening Wd. (E)	Wd. of Flat (H)	Flexibility	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Specifications Met	Available Lengths, ft.		1-99	100-Up
UHMW Plastic—Hard
3/4"	1"	5/8"	9/16"	5/8"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	00000	00000

Style 10—Push On

										Per Ft.
Inside Wd. (A)	Outside Wd. (C)	Flexibility	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Specifications Met	Available Lengths, ft.		1-99	100-Up
UHMW Plastic—Hard
3/8"	19/32"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	00000	00000
1/2"	11/16"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10, 25, 50, 100	0000000	0000	0000

Style 11—Screw In

Outside											Per Ft.
Wd. (C)	Ht. (D)	Thick.	Flexibility	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Specifications Met	Available Lengths, ft.		1-7	8-Up
UHMW Plastic—Hard
1 1/2"	1 1/2"	1/4"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8	0000000	00000	00000
2"	2"	1/4"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8	0000000	0000	0000
3"	3"	1/2"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	2, 5, 8	0000000	00000	00000

Style 12—Screw In

Outside		Bulb
Wd. (C)	Ht. (D)	Dia.	Ctr.-to-Ctr.	Flexibility	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Specifications Met	Length, ft.		Per Ft.
UHMW Plastic—Hard
3 1/4"	1/4"	3/4"	2 1/2"	Rigid	-20° to 180°	No	Yes	White	FDA Compliant 21 CFR 177.1520	5, 10	0000000	00000

Food Industry Wear Plates

Suitable for food contact, these plates are made of FDA listed UHMW plastic, which has a slippery surface to minimize friction. Often found on conveyor systems, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life. All of these plates have a hard rating to withstand high levels of impact. They're also nonmarking.

For technical drawings and 3-D models, click on a part number.

UHMW Plastic
Thick.	Lg.	Wd.	Nonmarking	For Use Outdoors	Hardness Rating	Hardness	Temperature Range, °F	Specifications Met	Color		Each
1/8"	12"	12"	Yes	No	Hard	Durometer 65D	-40° to 180°	FDA Compliant 21 CFR 177.1520	White	0000000	000000
1/4"	12"	12"	Yes	No	Hard	Durometer 65D	-40° to 180°	FDA Compliant 21 CFR 177.1520	White	0000000	00000
3/8"	12"	12"	Yes	No	Hard	Durometer 65D	-40° to 180°	FDA Compliant 21 CFR 177.1520	White	0000000	00000