Filter by
Environment
Impact Strength Rating
DFARS Compliance
About Plastic
More
Slippery UHMW Polyethylene 90° Angles
- Color: White
- Temperature Range: -20° F to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, FDA Compliant 21 CFR 177.1520
Often used to fabricate frames and protect corners from impact, these UHMW 90° angles have a slippery surface that stands up to scuffs, scrapes, and strikes.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Lengths, ft. | Per Ft. | |
1/8" Wall Thick. (-0.060" to 0.060") | ||||||||
| 1" | -0.060" to 0.060" | 1" | -0.060" to 0.060" | 7/8" | 7/8" | 0000000 | 00000 | |
| 1 1/2" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 1 3/8" | 1 3/8" | 0000000 | 0000 | |
| 2" | -0.060" to 0.060" | 2" | -0.060" to 0.060" | 1 7/8" | 1 7/8" | 0000000 | 0000 | |
1/4" Wall Thick. (-0.060" to 0.060") | ||||||||
| 5/8" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 3/8" | 1 1/4" | 0000000 | 0000 | |
| 1 1/2" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 1 1/4" | 1 1/4" | 0000000 | 0000 | |
| 2" | -0.060" to 0.060" | 2" | -0.060" to 0.060" | 1 3/4" | 1 3/4" | 0000000 | 0000 | |
1/2" Wall Thick. (-0.060" to 0.060") | ||||||||
| 3" | -0.060" to 0.060" | 3" | -0.060" to 0.060" | 2 1/2" | 2 1/2" | 0000000 | 00000 | |
| 3 1/2" | -0.060" to 0.060" | 3 1/2" | -0.060" to 0.060" | 3" | 3" | 0000000 | 00000 | |