Keep dust, microbes, and other pollutants on your skin or clothing from contaminating a clean room. Wear them once, then throw them away. These coveralls are cleaned and individually bagged in a clean room, so they won’t shed any lint or dust in your space. They’re made of Tyvek polyethylene, which has fibers bonded under heat and pressure for softness and strength. They hold up to limited contact with nonhazardous liquids, such as water and paint spray. Elastic cuffs fit tightly at your ankles and wrists to block splashes.

Use the size chart for general guidance. When choosing a size, consider individual body shape and clothing worn underneath.

Replace your respirator hood or swap it out for a new style. Select a hood compatible with your respirator for a comfortable, loose fit.

Hoods made from Tychem 2000 (formerly known as Tyvek QC) are chemical resistant.

Bullard 20LF series hoods are an alternative to a full-face respirator. They cover your face and the top of your head but not your ears and neck.

Bullard CC20 series hoods are a good all-around full-coverage option. They efficiently filter out airborne contaminants. Those with a hard hat protect your head from impact, such as from falling objects. Those with a ratchet suspension tighten and loosen with an easy-turn knob, so they’re more adjustable than hoods without a suspension.

Bullard Sightline series hoods have a wraparound lens that gives you 320° of unobstructed peripheral vision. The lens also helps these hoods feel less confining.

Made of chemical-resistant Tychem 2000 (formerly known as Tyvek QC), these hood respirators have both an outer bib and an inner bib that tucks into your clothing for splash protection. They hook up to your plant's air lines—because you don’t need to draw air through a filter or cartridge, resistance and fatigue are minimized. Respirators have a ratchet suspension that adjusts with an easy-turn knob.

These respirators do not require fit testing. The hood has a loose, comfortable fit that leaves room for a ponytail or beard. When the hood becomes worn, swap it with a replacement hood (sold separately). If you need a different material or style, select a respirator hood that’s compatible with your respirator.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube or a heating/cooling tube (sold separately) to maintain a comfortable temperature inside these respirators. Turn a knob to control the amount of warm air flowing in from your air supply.

When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 (formerly known as Tyvek QC) hood that protects against light liquid splashes. Tuck the hood with outer bib and inner bib into your clothing for splash protection. The ratchet suspension hat adjusts with an easy-turn knob.

If you need a different material or style, select a respirator hood that’s compatible with your respirator. Respirator hoods do not require fit testing, and they leave enough room to fit a ponytail or beard without compromising your respiratory protection. Hoods are available in a variety of materials and protection factors.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

The most mobile respirators in our offering—these powered respirators allow a wider range of motion than supplied-air respirators. The blower straps around your waist to allow unrestricted movement. They’re often used for jobs such as painting and applications where you need to move around. Comfortable to wear for extended periods of time, these respirators don’t press directly against your face. They include a rechargeable lithium-ion battery that powers them for approximately four hours. To alert you to low battery and low airflow, they have an alarm with two distinct sounds that can be heard inside the hood.

Made of Tychem 2000 (formerly known as Tyvek QC), these hoods are chemical resistant. They have two layers: an outer bib for overspray protection and an inner bib that tucks into your clothing for splash protection. Turn the knob to adjust the hood’s ratchet suspension for a personalized fit.

Respirators with a hard hat are best for jobsites where there is a risk of falling objects or an on-site hard hat requirement. The hard hat fits inside the hood.

Harnesses (sold separately) make it comfortable to wear the respirator for long periods by distributing its weight and reducing pressure on your lower back.