About Character Height
When you look at the face of a stamp, you'll notice the character is raised. The distance between the upper and lower raised ridges is known as the character height. This height is used to measure stamp size. If a stamp does not have a size marking on the shank, measure the character height to order the correct size.
The actual impression a stamp makes is larger than its character height and varies depending upon how hard you strike the stamp, the hardness of the material, and wear.
Build-Your-Own Metal Type Stamps
Choose only the characters you need to make your message from 0-9, A-Z, period, forward slash (/), dash, and blank spaces. To create your message, place characters in the holder and then tighten with the included hex key. The spring pin locks them in place for proper alignment. For holder to work properly, you must fill unused spaces with blanks. These stamps make marks on surfaces with a Rockwell hardness up to C28, including leather, wood, and most metals.
Characters (sold separately) come individually or as sets. If ordering replacement or additional characters, make sure the character height and notch-to-end length match that of characters you already have.
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | Notch-to-End Lg. | Stamp Material | Each | |
| 1/16" | 1" | 3/32" | 1/4" | 1/4" | Steel | 0000000 | 000000 |
| 1/8" | 1" | 1/8" | 1/4" | 1/4" | Steel | 0000000 | 00000 |
| 3/16" | 1" | 3/16" | 1/4" | 1/4" | Steel | 0000000 | 00000 |
| 1/4" | 1" | 1/4" | 3/8" | 1/4" | Steel | 000000 | 00000 |
| 3/8" | 1" | 3/8" | 1/2" | 1/4" | Steel | 000000 | 00000 |
| 1/2" | 1" | 1/2" | 5/8" | 1/4" | Steel | 000000 | 00000 |
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | Notch-to-End Lg. | Stamp Material | Each | |
| 1/16" | 1" | 3/32" | 1/4" | 1/4" | Steel | 0000000 | 00000 |
| 1/8" | 1" | 1/8" | 1/4" | 1/4" | Steel | 0000000 | 0000 |
| 3/16" | 1" | 3/16" | 1/4" | 1/4" | Steel | 0000000 | 0000 |
| 1/4" | 1" | 1/4" | 3/8" | 1/4" | Steel | 000000 | 0000 |
| 3/8" | 1" | 3/8" | 1/2" | 1/4" | Steel | 000000 | 00000 |
| 1/2" | 1" | 1/2" | 5/8" | 1/4" | Steel | 0000000 | 00000 |
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | Notch-to-End Lg. | Stamp Material | Includes | Each | |
| 1/16" | 1" | 3/32" | 1/4" | 1/4" | Steel | One each of 0-9 | 00000000 | 0000000 |
| 1/8" | 1" | 1/8" | 1/4" | 1/4" | Steel | One each of 0-9 | 00000000 | 000000 |
| 3/16" | 1" | 3/16" | 1/4" | 1/4" | Steel | One each of 0-9 | 00000000 | 000000 |
| 1/4" | 1" | 1/4" | 3/8" | 1/4" | Steel | One each of 0-9 | 00000000 | 000000 |
| 3/8" | 1" | 3/8" | 1/2" | 1/4" | Steel | One each of 0-9 | 00000000 | 000000 |
| 1/2" | 1" | 1/2" | 5/8" | 1/4" | Steel | One each of 0-9 | 00000000 | 000000 |
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | Notch-to-End Lg. | Stamp Material | Includes | Each | |
| 1/16" | 1" | 3/32" | 1/4" | 1/4" | Steel | One each of A-Z | 00000000 | 0000000 |
| 1/8" | 1" | 1/8" | 1/4" | 1/4" | Steel | One each of A-Z | 00000000 | 000000 |
| 3/16" | 1" | 3/16" | 1/4" | 1/4" | Steel | One each of A-Z | 00000000 | 000000 |
| 1/4" | 1" | 1/4" | 3/8" | 1/4" | Steel | One each of A-Z | 00000000 | 000000 |
| 3/8" | 1" | 3/8" | 1/2" | 1/4" | Steel | One each of A-Z | 00000000 | 000000 |
| 1/2" | 1" | 1/2" | 5/8" | 1/4" | Steel | One each of A-Z | 00000000 | 000000 |
Build-Your-Own Pocket-Size Metal Type Stamps
Choose only the characters you need from 0-9, A-Z, and blank spaces. To create your message, place characters in the holder and a retaining pin keeps them firmly in place. For holder to work properly, you must fill unused spaces with blanks (when using 5/32" high characters, unused spaces must be filled with 1/8" blanks). These stamps make marks on materials with a Rockwell hardness up to C35, including leather, wood, and most metals.
Characters (sold separately) come individually or as sets. If ordering replacement or additional characters, make sure the character height and notch-to-end length match that of characters you already have.
Holder | ||||||
|---|---|---|---|---|---|---|
| For Character Ht. | Max. No. of Characters per Line | Wd. | Lg. | Includes | Each | |
| 1/16" 3/32" 1/8" 5/32" | 12 8 6 4 | 1 1/4" | 4 1/2" | Leather Pouch | 0000000 | 0000000 |
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | Notch-to-End Lg. | Stamp Material | Each | |
| 1/16" | 7/8" | 1/16" | 1/4" | 5/16" | Steel | 0000000 | 000000 |
| 3/32" | 7/8" | 3/32" | 1/4" | 5/16" | Steel | 0000000 | 00000 |
| 1/8" | 7/8" | 1/8" | 1/4" | 5/16" | Steel | 0000000 | 00000 |
| 5/32" | 7/8" | 5/32" | 1/4" | 5/16" | Steel | 0000000 | 00000 |
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | Notch-to-End Lg. | Stamp Material | Each | |
| 1/16" | 7/8" | 1/16" | 1/4" | 5/16" | Steel | 0000000 | 000000 |
| 3/32" | 7/8" | 3/32" | 1/4" | 5/16" | Steel | 0000000 | 00000 |
| 1/8" | 7/8" | 1/8" | 1/4" | 5/16" | Steel | 0000000 | 00000 |
| 5/32" | 7/8" | 5/32" | 1/4" | 5/16" | Steel | 0000000 | 00000 |
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | Notch-to-End Lg. | Stamp Material | Includes | Each | |
| 1/16" | 7/8" | 1/16" | 1/4" | 5/16" | Steel | One each of 0-9 | 0000000 | 0000000 |
| 3/32" | 7/8" | 3/32" | 1/4" | 5/16" | Steel | One each of 0-9 | 0000000 | 000000 |
| 1/8" | 7/8" | 1/8" | 1/4" | 5/16" | Steel | One each of 0-9 | 0000000 | 000000 |
| 5/32" | 7/8" | 5/32" | 1/4" | 5/16" | Steel | One each of 0-9 | 0000000 | 000000 |
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. | Lg. | Wd. | Thick. | Notch-to-End Lg. | Stamp Material | Includes | Each | |
| 1/16" | 7/8" | 1/16" | 1/4" | 5/16" | Steel | One each of A-Z | 0000000 | 0000000 |
| 3/32" | 7/8" | 3/32" | 1/4" | 5/16" | Steel | One each of A-Z | 0000000 | 000000 |
| 1/8" | 7/8" | 1/8" | 1/4" | 5/16" | Steel | One each of A-Z | 0000000 | 000000 |
| 5/32" | 7/8" | 5/32" | 1/4" | 5/16" | Steel | One each of A-Z | 0000000 | 000000 |
Metal Type Stamps
Everything you need to make your own messages in one convenient case, including letters, numbers, punctuation, and a holder. To create your message, place individual characters in the holder and then tighten with the included hex key. For the holder to work properly, you must fill unused spaces with blanks. For use on leather, wood, and most metals.
 |  |
 |
Metal Type Stamps | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | Holder | Replacement Holders | ||||||||||
| Character Ht. | Max. No. of Characters per Line | Lg. | Wd. | Thick. | Wd. | Lg. | Stamp Material | Includes | Each | Each | ||
For Max. Surface Hardness Rockwell C38 | ||||||||||||
| 1/16" | 18 | 7/8" | 1/16" | 1/4" | 1 3/4" | 3 7/8" | Steel | Holder, Hex Key, Compartmented Case, 0-9, A-Z, Ampersand (&), Dash (-), Forward Slash (/), Period (.), and Blank ( ) | 0000000 | 0000000 | 0000000 | 000000 |
| 3/32" | 12 | 7/8" | 3/32" | 1/4" | 1 3/4" | 3 7/8" | Steel | Holder, Hex Key, Compartmented Case, 0-9, A-Z, Ampersand (&), Dash (-), Forward Slash (/), Period (.), and Blank ( ) | 0000000 | 000000 | 0000000 | 00000 |
| 1/8" | 9 | 7/8" | 1/8" | 1/4" | 1 3/4" | 3 7/8" | Steel | Holder, Hex Key, Compartmented Case, 0-9, A-Z, Ampersand (&), Dash (-), Forward Slash (/), Period (.), and Blank ( ) | 0000000 | 000000 | 0000000 | 00000 |
| 3/16" | 8 | 7/8" | 3/16" | 1/4" | 2 1/4" | 3 7/8" | Steel | Holder, Hex Key, Compartmented Case, 0-9, A-Z, Ampersand (&), Dash (-), Forward Slash (/), Period (.), and Blank ( ) | 0000000 | 000000 | 0000000 | 00000 |