McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    115 Products

    Fully Grooved Dowel Pins
    3D CAD models available

    With a tighter fit than standard dowel pins, these resist pulling from movement and vibration, even in imperfect holes. Three grooves pinch shut when installed, creating tension to lock in place. Also known as Type A pins.
    For the best fit, drill your hole slightly larger than the nominal diameter shown.
    Steel
    Image of Product. Front orientation. Dowel Pins. Fully Grooved Dowel Pins, Tapered Groove.

    Tapered Groove

    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Tapered Groove—Easier to install than pins with parallel grooves but less secure in high-vibration applications.
    Nominal
    Max.
    Lg.
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia. Tolerance
    Groove
    Type
    Breaking Strength,
    lbf
    Min.
    Hardness
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/32" Diameter
    1/4"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Tapered850Not Rated25000000000000000
    1/2"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Tapered850Not Rated2500000000000000
     
    1/8" Diameter
    1/2"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Tapered1,600Not Rated2500000000000000
    3/4"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Tapered1,600Not Rated2500000000000000
    1"0.125"-0.002" to 0"0.133"-0.003" to 0.003"Tapered1,600Not Rated2500000000000000
     
    5/32" Diameter
    1/2"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Tapered2,300Not Rated2500000000000000
    3/4"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Tapered2,300Not Rated2500000000000000
    1"0.156"-0.002" to 0"0.165"-0.003" to 0.003"Tapered2,300Not Rated2500000000000000
     
    3/16" Diameter
    1/2"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Tapered3,300Not Rated2500000000000000
    3/4"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Tapered3,300Not Rated2500000000000000
    1"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Tapered3,300Not Rated100000000000000
    1 1/2"0.188"-0.002" to 0"0.197"-0.003" to 0.003"Tapered3,300Not Rated1000000000000000
     
    1/4" Diameter
    3/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Tapered5,800Not Rated2500000000000000
    1"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Tapered5,800Not Rated2500000000000000
    1 1/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Tapered5,800Not Rated100000000000000
    1 1/2"0.25"-0.002" to 0"0.262"-0.003" to 0.003"Tapered5,800Not Rated1000000000000000
     
    5/16" Diameter
    3/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Tapered7,600Not Rated100000000000000
    1"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Tapered7,600Not Rated100000000000000
    1 1/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Tapered7,600Not Rated100000000000000
     
    3/8" Diameter
    1"0.375"-0.002" to 0"0.394"-0.003" to 0.003"Tapered11,000Not Rated1000000000000000
     

    Partially Grooved Dowel Pins
    3D CAD models available

    The grooved section secures these pins while the smooth portion is free to act as a pivot or hinge. The grooves pinch shut when installed, creating tension to lock in place. They fit tighter than standard dowel pins and resist pulling from movement and vibration, even in imperfect holes.
    For the best fit, drill your hole slightly larger than the nominal diameter shown.
    Half Grooved
    Image of ProductInUse. Front orientation. Dowel Pins. Partially Grooved Dowel Pins, Half Grooved.
    Image of Product. Back orientation. Dowel Pins. Partially Grooved Dowel Pins, Half Grooved, Parallel Groove.

    Parallel Groove

    The most versatile partially grooved pins, these are used in a range of applications, including as rod end linkages, stop pins, and locators. Also known as type H pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Parallel Groove—Fit tighter than pins with tapered grooves to stay in place under severe vibration. However, they require more force to insert.
    Nominal
    Max.
    Lg.
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia. Tolerance
    Groove
    Type
    Breaking Strength,
    lbf
    Min.
    Hardness
    Groove
    Lg.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/32" Diameter
    1/4"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/8"25000000000000000
    1/2"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/4"2500000000000000
     
    1/8" Diameter
    1/2"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated1/4"2500000000000000
    3/4"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated3/8"2500000000000000
    1"0.125"-0.002" to 0"0.133"-0.003" to 0.003"Parallel1,600Not Rated1/2"2500000000000000
     
    5/32" Diameter
    1/2"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated1/4"2500000000000000
    3/4"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated3/8"2500000000000000
    1"0.156"-0.002" to 0"0.165"-0.003" to 0.003"Parallel2,300Not Rated1/2"2500000000000000
     
    3/16" Diameter
    1/2"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/4"2500000000000000
    3/4"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated3/8"2500000000000000
    1"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/2"100000000000000
    1 1/2"0.188"-0.002" to 0"0.197"-0.003" to 0.003"Parallel3,300Not Rated3/4"1000000000000000
     
    1/4" Diameter
    3/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated3/8"2500000000000000
    1"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated1/2"2500000000000000
    1 1/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated5/8"100000000000000
    1 1/2"0.25"-0.002" to 0"0.262"-0.003" to 0.003"Parallel5,800Not Rated3/4"1000000000000000
     
    5/16" Diameter
    3/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated3/8"100000000000000
    1"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated1/2"100000000000000
    1 1/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated5/8"100000000000000
     
    3/8" Diameter
    1"0.375"-0.002" to 0"0.394"-0.003" to 0.003"Parallel11,000Not Rated1/2"1000000000000000
     
    Center Grooved
    Image of ProductInUse. Front orientation. Dowel Pins. Partially Grooved Dowel Pins, Center Grooved.
    Image of Product. Front orientation. Dowel Pins. Partially Grooved Dowel Pins, Center Grooved, Parallel Groove.

    Parallel Groove

    These pins lock in the middle, leaving two smooth ends free. They're often used to create a T-handle, such as on a valve stem to open and close it by hand. Also known as type E pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Parallel Groove—Fit tighter than pins with tapered grooves to stay in place under severe vibration. However, they require more force to insert.
    Nominal
    Max.
    Lg.
    Dia.
    Dia. Tolerance
    Dia.
    Dia. Tolerance
    Groove
    Type
    Breaking Strength,
    lbf
    Min.
    Hardness
    Groove
    Lg.
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/32" Diameter
    1/4"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/8"__25000000000000000
    1/2"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/4"__2500000000000000
     
    1/8" Diameter
    1/2"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated1/4"__2500000000000000
    3/4"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated3/8"__2500000000000000
    1"0.125"-0.002" to 0"0.133"-0.003" to 0.003"Parallel1,600Not Rated1/2"__2500000000000000
     
    5/32" Diameter
    1/2"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated1/4"__2500000000000000
    3/4"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated3/8"__2500000000000000
    1"0.156"-0.002" to 0"0.165"-0.003" to 0.003"Parallel2,300Not Rated1/2"__2500000000000000
     
    3/16" Diameter
    1/2"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/4"__2500000000000000
    3/4"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated3/8"__2500000000000000
    1"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/2"__100000000000000
    1 1/2"0.188"-0.002" to 0"0.197"-0.003" to 0.003"Parallel3,300Not Rated3/4"__1000000000000000
     
    1/4" Diameter
    3/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated3/8"__2500000000000000
    1"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated1/2"__2500000000000000
    1 1/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated5/8"__100000000000000
    1 1/2"0.25"-0.002" to 0"0.262"-0.003" to 0.003"Parallel5,800Not Rated3/4"__1000000000000000
     
    5/16" Diameter
    3/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated3/8"__100000000000000
    1"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated1/2"__100000000000000
    1 1/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated5/8"__100000000000000
     
    3/8" Diameter
    1"0.375"-0.002" to 0"0.394"-0.003" to 0.003"Parallel11,000Not Rated1/2"__1000000000000000
     
    2 mm Diameter
    12 mm2 mm-0.025 mm to 0 mm2.1 mm0 mm to 0.05 mmParallel600Rockwell B684 mmISO 874210000000000000
     
    2.5 mm Diameter
    24 mm2.5 mm-0.025 mm to 0 mm2.65 mm-0.05 mm to 0.05 mmParallel950Rockwell B688 mmISO 874210000000000000
     
    3 mm Diameter
    12 mm3 mm-0.025 mm to 0 mm3.1 mm-0.05 mm to 0.05 mmParallel1,400Rockwell B684 mmISO 874210000000000000
    14 mm3 mm-0.025 mm to 0 mm3.1 mm-0.05 mm to 0.05 mmParallel1,400Rockwell B684.66 mmISO 874210000000000000
    16 mm3 mm-0.025 mm to 0 mm3.1 mm-0.05 mm to 0.05 mmParallel1,400Rockwell B685.33 mmISO 874210000000000000
    22 mm3 mm-0.025 mm to 0 mm3.15 mm-0.05 mm to 0.05 mmParallel1,400Rockwell B687.33 mmISO 874210000000000000
    24 mm3 mm-0.025 mm to 0 mm3.15 mm-0.05 mm to 0.05 mmParallel1,400Rockwell B688 mmISO 874210000000000000
     
    4 mm Diameter
    16 mm4 mm-0.075 mm to 0 mm4.15 mm-0.05 mm to 0.05 mmParallel2,500Rockwell B685.33 mmISO 874210000000000000
    18 mm4 mm-0.075 mm to 0 mm4.15 mm-0.05 mm to 0.05 mmParallel2,500Rockwell B686 mmISO 874210000000000000
    24 mm4 mm-0.075 mm to 0 mm4.2 mm-0.05 mm to 0.05 mmParallel2,500Rockwell B688 mmISO 874210000000000000
     
    5 mm Diameter
    22 mm5 mm-0.075 mm to 0 mm5.2 mm-0.05 mm to 0.05 mmParallel3,950Rockwell B687.33 mmISO 8742100000000000000
    26 mm5 mm-0.075 mm to 0 mm5.2 mm-0.05 mm to 0.05 mmParallel3,950Rockwell B688.66 mmISO 8742100000000000000
    32 mm5 mm-0.075 mm to 0 mm5.25 mm-0.05 mm to 0.05 mmParallel3,950Rockwell B6810.66 mmISO 8742100000000000000
     
    6 mm Diameter
    28 mm6 mm-0.075 mm to 0 mm6.25 mm-0.05 mm to 0.05 mmParallel5,700Rockwell B689.33 mmISO 8742100000000000000
     
    8 mm Diameter
    32 mm8 mm-0.09 mm to 0 mm8.25 mm-0.05 mm to 0.05 mmParallel10,150Rockwell B6810.66 mmISO 874250000000000000
     
    Quarter Grooved
    Image of ProductInUse. Front orientation. Dowel Pins. Partially Grooved Dowel Pins, Quarter Grooved.
    Image of Product. Front orientation. Dowel Pins. Partially Grooved Dowel Pins, Quarter Grooved, Parallel Groove.

    Parallel

    Groove

    With a longer smooth end than half-grooved dowel pins, these are often used for thicker pivoting parts, such as levers and hinges. Also known as type C pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Parallel Groove—Fit tighter than pins with tapered grooves to stay in place under severe vibration. However, they require more force to insert.
    Nominal
    Max.
    Lg.
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia. Tolerance
    Groove
    Type
    Breaking Strength,
    lbf
    Min.
    Hardness
    Groove
    Lg.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/32" Diameter
    1/4"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/16"25000000000000000
    1/2"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/8"2500000000000000
     
    1/8" Diameter
    1/2"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated1/8"2500000000000000
    3/4"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated3/16"2500000000000000
    1"0.125"-0.002" to 0"0.133"-0.003" to 0.003"Parallel1,600Not Rated1/4"2500000000000000
     
    5/32" Diameter
    1/2"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated1/8"2500000000000000
    3/4"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated3/16"2500000000000000
    1"0.156"-0.002" to 0"0.165"-0.003" to 0.003"Parallel2,300Not Rated1/4"2500000000000000
     
    3/16" Diameter
    1/2"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/8"2500000000000000
    3/4"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated3/16"2500000000000000
    1"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/4"100000000000000
    1 1/2"0.188"-0.002" to 0"0.197"-0.003" to 0.003"Parallel3,300Not Rated3/8"1000000000000000
     
    1/4" Diameter
    3/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated3/16"2500000000000000
    1"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated1/4"2500000000000000
    1 1/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated5/16"100000000000000
    1 1/2"0.25"-0.002" to 0"0.262"-0.003" to 0.003"Parallel5,800Not Rated3/8"1000000000000000
     
    5/16" Diameter
    3/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated3/16"100000000000000
    1"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated1/4"100000000000000
    1 1/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated5/16"100000000000000
     
    3/8" Diameter
    1"0.375"-0.002" to 0"0.394"-0.003" to 0.003"Parallel11,000Not Rated1/4"1000000000000000
     

    Partially Grooved Dowel Pins with Notch
    3D CAD models available

    Slip a spring into the notch at the end of the pin. Often used in automated machinery such as conveyors and robotic arms, the pin anchors the spring in place to create tension between components. The grooved section pinches shut when installed to lock the pin in place. Grooved pins have a tighter fit than standard dowel pins and resist pulling from movement and vibration.
    For the best fit, drill your hole slightly larger than the nominal diameter shown.
    Half Grooved
    Image of ProductInUse. Front orientation. Dowel Pins. Partially Grooved Dowel Pins with Notch, Half Grooved.
    Image of Product. Front orientation. Dowel Pins. Partially Grooved Dowel Pins with Notch, Half Grooved.
    Also known as type G pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Parallel Groove—Fit tighter than pins with tapered grooves to stay in place under severe vibration. However, they require more force to insert.
    Nominal
    Max.
    Lg.
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia. Tolerance
    Groove
    Type
    Breaking Strength,
    lbf
    Min.
    Hardness
    Groove
    Lg.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/32" Diameter
    1/4"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/8"25000000000000000
    1/2"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/4"2500000000000000
     
    1/8" Diameter
    1/2"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated1/4"2500000000000000
    3/4"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated3/8"2500000000000000
    1"0.125"-0.002" to 0"0.133"-0.003" to 0.003"Parallel1,600Not Rated1/2"2500000000000000
     
    5/32" Diameter
    1/2"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated1/4"2500000000000000
    3/4"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated3/8"2500000000000000
    1"0.156"-0.002" to 0"0.165"-0.003" to 0.003"Parallel2,300Not Rated1/2"2500000000000000
     
    3/16" Diameter
    1/2"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/4"2500000000000000
    3/4"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated3/8"2500000000000000
    1"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/2"100000000000000
    1 1/2"0.188"-0.002" to 0"0.197"-0.003" to 0.003"Parallel3,300Not Rated3/4"1000000000000000
     
    1/4" Diameter
    3/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated3/8"2500000000000000
    1"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated1/2"2500000000000000
    1 1/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated5/8"100000000000000
    1 1/2"0.25"-0.002" to 0"0.262"-0.003" to 0.003"Parallel5,800Not Rated3/4"1000000000000000
     
    5/16" Diameter
    3/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated3/8"100000000000000
    1"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated1/2"100000000000000
    1 1/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated5/8"100000000000000
     
    3/8" Diameter
    1"0.375"-0.002" to 0"0.394"-0.003" to 0.003"Parallel11,000Not Rated1/2"1000000000000000
     
    back to top