Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps. To install, weld the bottom plate onto the mounting surface.

Zinc-plated steel and zinc-phosphate-coated steel plates have good corrosion resistance. 304 stainless steel plates have excellent corrosion resistance.

Stacking clamps allow you to route multiple lines on top of each other. They include fasteners and a plate for attaching to regular clamps or other stacking clamps. Stacking clamps cannot be used alone.

For technical drawings and 3-D models, click on a part number.

Secure two pressurized hydraulic lines with a single clamp. Use the included rail nuts to mount these clamps onto rails (sold separately), no adhesive or welding required. They fit tightly around the lines to reduce vibration. To install, bolt or weld rails to the mounting surface, then attach clamps.

Zinc-plated steel plates have good corrosion resistance. 304 stainless steel plates have excellent corrosion resistance.

Note: Not for use with strut channel or strut-mount clamps. For strut mount clamps, see Vibration-Damping Strut-Mount Clamps.

For technical drawings and 3-D models, click on a part number.

Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. Fold the arm of the clamp closed before mounting.

For technical drawings and 3-D models, click on a part number.

Quickly mount parallel lines of pipe, hose, or tubing by clicking them into these clamps. They are UV-resistant and can be used outdoors.

For technical drawings and 3-D models, click on a part number.

Mount these brackets between two studs to support copper tubing for sink faucets and other water supply fixtures. Brackets have multiple mounting holes to fit a variety of stud-to-stud distances.

Style B brackets have four sets of holes, so they can support multiple tubing sizes. They support 11 lines of size 1/2 tubing, 5 lines of size 3/4 tubing, 3 lines of size 1 tubing, and 2 lines of 1 1/4 tubing. Made of copper-plated steel, they resist corrosion when used with copper tubing. Route tubing directly into the bracket—no inserts required.

Clamps hold guide rails in place or join ends of a rail together.

Use some clamps with threaded mounting rods or mounting brackets to hold guide rails in place. Styles B, D, M, Q, U, and W use a hex or carriage bolt. Carriage bolts are useful for mounting in tight spaces because there’s no need to hold them steady with a wrench or socket while fastening them. Styles C and V, as well as styles S and U that have a 3/8" mounting hole diameter, mount using a hex bolt. You’ll need access to both sides when fastening them in order to hold the bolt steady with a wrench or socket. Styles J and R have a hex-shaped hole that holds the bolt as you fasten the other side. Style T has a slotted mounting hole for making quick adjustments to guide rails.

For technical drawings and 3-D models, click on a part number.