We will reply to your message within an hour.
Use these general purpose connectors indoors in high vibration applications. A quarter turn locks them together when mated to remain secure in high-vibration applications.
Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.
Protect computers and other sensitive equipment from signal interference; these receptaces are also known as isolated ground receptacles. They turn to lock together when mated to prevent accidental disconnection.
A good fit for tight spaces, these connectors are also known as NEMA midget plugs. They turn to lock together when mated to prevent accidental disconnection.
Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.
When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.
Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. These connectors turn to lock together when mated to prevent accidental disconnection.
Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion-resistant so they can be used in high-vibration marine environments.
A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.
A quarter turn locks these connectors in an outlet to remain secure in high-vibration applications and prevent accidental disconnection. They are not compatible with NEMA configurations.
Combine straight-blade and turn-lock styles in one receptacle for convenience.
Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.
These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
Keep personnel safe from electric shock with these cords.
Attach these splitters to an extension cord to power multiple devices from one cord.
Hardwire these cords to equipment.
Plug these cords into computers, lab equipment, and office machines that have IEC connections.
Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.
These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
Secure enclosure doors with these T-handle latches. All have a cam that rotates to keep doors closed.
Lift the handle and turn it a quarter-turn to latch, then push it down for a tight hold that resists vibration.
Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.
Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.
Fold the ring handle into the recess to stay out of the way when not in use.
With a flat inset grip, the handle is recessed to stay out of the way.
The T-handle lays flush in the recess, so you won’t bump into or catch your clothes on these latches. Also called quarter-turn latches, they have a cam that rotates 90° to secure enclosures.
Fold the handle into the recess to stay out of the way when not in use. Also known as compression cam latches, they create a tighter hold than traditional cam latches, making them useful for doors that have a seal.
Fold the ring handle into the recess to stay out of the way when not in use. Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal.
With a finger-grip knob, these latches fit where latches with handles won't.
Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.
Designed for use in 1/2" dia. through holes.
Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.
These latches are IP65 rated for protection against dust, dirt, and washdowns.
Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Designed for smaller-than-standard through holes, these latches are often used for securing doors and drawers.
Use these latches with three-point locking systems, such as those on filing cabinet doors.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.
Stop water from getting into your enclosure through the latch during low-pressure washdowns. These latches have a gasket that helps maintain your sealed enclosure's IP65 or NEMA rating.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use.
Prevent water, dust, and dirt from getting into a sealed enclosure through the latch. Press the button and the handle pops out; push the handle shut for a secure hold.
Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.
Grip and turn the ring handle to open and close doors and drawers, then fold it out of the way when you are done.
Raise the handle and it swings smoothly for easy latching and unlatching.
For protection against dust, dirt, and washdowns, these locks are IP65 rated.
These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
Mount these two-piece locks on sealed pressurized enclosures to gradually release pressure and control the swing of your door.
Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.
Open these locks with a slotted screwdriver. Select the turn direction when mounting the cam.
Install these locks on enclosure doors with smaller-than-standard diameter through holes. Also known as compression cam locks, these create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.
Secure cabinet doors and other fixtures that have smaller-than-standard-diameter through holes. A gasket prevents water, dust, and dirt from getting into an enclosure through the lock. These locks open with a slotted screwdriver, so they’re great for a facility where you don’t want a complicated keying system.
Designed for use in 1/4" or 1/2" dia. through holes.
The face of these locks has a red indicator that is visible when unlocked and hidden when locked. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments. These locks open with a slotted screwdriver, so they’re great for a facility where you don’t want a complicated keying system.
Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. All open with a slotted screwdriver.
A spring-loaded bushing keeps your door from vibrating open. These locks open and close with a slotted screwdriver, so they’re great if you want a simple keying system for your enclosure.
These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.
Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.
Secure cabinet doors and file drawers that have smaller than standard-diameter through holes. Offering more security than standard keyed cam locks, these have circular keys that are difficult to duplicate.
These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.
Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw.
Install these locks in smaller-than-standard-diameter through holes on cabinet doors and other fixtures.
Often used on cabinet doors and file drawers, these cam locks fit into a ¾” dia. hole, the most common through-hole size, and have an arm that swings to lock.
Meet U.S. postal service guidelines for mailbox locks.
Ideal for high-vibration environments, these locks create a tighter hold than standard cam locks.
Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.
These locks open with their own unique key as well as a master key.
These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.
Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants.
Designed for smaller-than-standard-diameter through holes, these locks are often used for securing cabinet doors and filing cabinet drawers.
Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Offering more security than standard keyed alike cam locks, they have circular keys that are difficult to duplicate.
Install these locks on cabinet doors and file drawers with a smaller-than-standard diameter through hole.
Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.
Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
These locks require a hex key to open.
Install these locks in smaller-than-standard-diameter through holes on cabinet doors and file drawers. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments.
Get the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn lock. These locks open with a female hex key (sold separately), so they match a keying system that’s common for industrial enclosures and other machinery but are more secure than locks that open with a male hex key or screwdriver.
Spot when these locks are open with just a glance—a red indicator shows they're unlocked. Also known as compression cam locks, their cam seals more tightly against a door or drawer than a standard cam to reduce rattling from vibration.
A gasket stops water from getting past these locks during high-pressure, high-temperature washdowns common in food processing plants. They lock with a hex key, so they’re great if you don’t want to keep a complicated keying system.
Install these locks in smaller-than-standard diameter through holes to secure enclosure doors and file drawers. They open with a hex key, so they’re great for a facility where you don’t need a complicated keying system.
Quickly spot if these locks are open—a red indicator appears on the lock face or a spring-loaded cover pops up when they’re unlocked. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.
A gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures
Mount these two-piece locks on sealed pressurized enclosures to gradually release pressure and prevent your door from bursting open.
Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. All open with a square key, so they're more secure than locks that open with a hex or slotted driver.
Prevent cabinet doors, drawers, and other enclosures with smaller-than-standard diameter through holes from vibrating open. Also known as compression cam locks, these locks create a tighter hold than standard cam locks, making them useful for doors that have a seal. These locks open with a square key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery.
Secure enclosures that have smaller-than-standard-diameter through holes. These locks open with a square key, so they’re more protected than locks that open with a hex or slotted driver.
Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All open with a square key, so they're more secure than locks that open with a hex or slotted driver.
A spring-loaded bushing keeps your enclosure door from vibrating open. These locks combine the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn cam lock.
Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.
Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All open with a triangle key, so they’re more secure than locks that open with a hex or slotted driver.
Open these locks with a triangle key—it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery.
Designed for smaller-than-standard-diameter through holes, these locks are often installed in cabinet doors. They open with a triangle key, so they’re more secure than locks that open with a hex or slotted driver.
An gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in labs.
The spring-loaded cover pops up when these locks are open, so you’re able to see from a distance when they're unlocked. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments. They open with a triangle key, so they match a keying system that's common for industrial enclosures and other machinery but are more secure than locks that open with a hex or slotted driver.
Designed for food-processing and hygienic applications, these locks are FDA compliant for direct contact with food. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.
In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.
The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key.
Lift the handle and turn it a quarter-turn to close, then push it down to reach full compression for a secure hold. Also known as compression cam locks, these locks create a tighter hold than standard cam locks on cabinet doors and file drawers in high-vibration environments, making them useful for doors that have a seal.
Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
These locks are IP65 rated for protection against dust, dirt, and washdowns.
Choose these locks if you need each one to open with a different key.
A key shutter on these locks keeps low-pressure washdowns and dust from entering the lock cylinder and causing damage. This helps you maintain an IP65 rating on sealed enclosures.
Open these locks with both a master key and their own unique key.
A master key opens all of these locks, which also have their own unique keys.
Open each of these locks with a different key.
Secure enclosure doors with these L-handle locks. Choose them if you need several locks that open with the same key.
Install these locks in smaller-than-standard-diameter through holes on cabinet doors and file drawers. They’re keyed alike, so they’re a good choice when you need several locks that open with the same key.
Help keep your sealed enclosure's contents safe from water damage—these locks help maintain an enclosure's IP or NEMA rating for low-pressure washdowns.
For a simplified keying system, these cam locks open and close with a slotted screwdriver. Also called quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures.
A hex key (not included) opens and closes these cam locks, simplifying your keying system. Also known as quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures.
When not in use, fold the handle into the recess to keep it out of the way. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.
With a molded inset grip, the handle remains recessed to stay out of the way.
For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down into the recess to create compression and minimize rattling from vibration. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.
A gasket helps keep dust and low-pressure washdowns from entering through these locks. This helps you maintain your sealed enclosure's IP or NEMA rating. Press the button to pop the handle out; push the handle shut for a secure hold. Also known as compression cam locks, the lever on these locks creates a tighter hold than traditional cam locks.
To help maintain a sealed enclosure's IP65 and NEMA 4 rating, these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. Press the button to pop the handle out; push the handle shut for a secure hold. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system.
Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.
Help maintain your sealed enclosure’s IP65 and NEMA 4 ratings—these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. Press the button to pop the handle out; push the handle shut for a secure hold. These locks close with a slotted screwdriver, so they’re ideal for keeping a simple keying system.
Press the button and the handle snaps open; push the handle shut for a secure hold.
Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. When you close them, a lever raises to tightly press your door or drawer shut with an attached screw.
Latch and lock doors and cabinets with these swing-handle cam locks, and unlock them with a four-number combination code.
Similar to locks on a hotel safe, each user sets a new combination.
Set a combination and reset it at any time.
Give multiple people access to secured items or equipment in washdown areas without requiring keys. A gasket prevents low-pressure washdowns, dust, and dirt from getting into an enclosure through the lock.
A gasket helps keep dust and water from washdowns or brief submersions from entering through the latch. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches.
It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch, making them useful for doors that have a seal.
Ideal for high-vibration environments, these latches create a tighter hold than standard cam latches on cabinet doors and file drawers. Add a padlock for extra security.
To fit in tight areas, these latches have a knob instead of a handle. Add a padlock for extra security.
Secure these latches with a padlock.
With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.
More secure than locks that open with a hex or slotted driver, these locks open with a square key. Add a padlock for extra security.
These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for low- or high-pressure washdowns. Often installed on electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door.
Multiple gaskets help keep dust and high-pressure washdowns from entering through these latches. This helps you maintain your sealed enclosure's IP or NEMA rating. Often installed on server cabinets and electrical panels, these latches have a handle that swings smoothly when you lift it to latch and unlatch the door.
Open these locks with a triangle key (sold separately)—it’s more secure than a hex key or screwdriver. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.
For a simple yet secure keying system, these locks open with a two-way key (sold separately), also called a double-bit key. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.
For extra security, these brackets mount to a cam lock or latch without a handle so you can add a padlock.
Grab these pull tabs to easily open a door or panel when your cam lock or latch doesn’t have a handle.
Stop dust, water, and other elements from getting into cam locks and latches that don’t have a handle.
Make it easy to open a door or panel when your miniature cam lock or latch doesn't have a handle.
Keep dust, water, and other elements out of miniature cam locks and latches that don’t have handles.
Hold doors, drawers, and hatches closed with the turn of a handle.
Turn the handle to keep doors, drawers, and hatches closed.
Twist these latches to hold small lightweight doors and panels closed.
Draw lightweight surfaces together with these latches.
Use these L-handle latches to draw lightweight surfaces together.
Lift and turn the handle 180° to open and close these latches.
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.
Lift and turn the handle 180° to open and close this lock.
Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.
Choose these keyed alike locks if you need several that open with the same key.
Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.
Use these latches alone for single-point latching, or add latch kits for more holding power.
The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.
Choose these locks if you need several that open with the same key.
Choose these keyed alike locks when you need several that open with the same key.
Choose these L-handle locks if you need several that open with the same key.
Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.
Choose these locks if you need to lock multiple drawers with the same key.
Open each of these drawer locks with a different key.
To ensure the correct fit on your drawer, these locks include two latch bolts.
These drawer locks open with their own keys and with a master key.
With thicker bodies and longer bolts, these locks resist prying to provide more security than other keyed alike deadbolt cabinet door locks.
To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.
Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.
Choose these locks if you need locks that each open with a different key.
Choose these locks if you need several locks that open with the same key.
Each of these cabinet locks opens with its own key.
Open multiple cabinet locks with the same key.
Open multiple cabinet locks with their own keys, as well as with a master key.
These knobs can lock with a button from the inside.
These handles can lock with a button from the inside.
Key and replace lock cores without dismantling the entire door handle. Also known as interchangeable-core handles.
Install your own compatible lock cylinders in these handles. The inside handle opens the door whether or not it is locked.
For frequently used doors, these handles last twice as long as standard key-locking door handles without lock cylinders.
Lock and unlock the outside handle with both a master key and a unique door key. The inside handle can always open the door.
The locks on these handles open with the same key. They can open from the inside handle whether locked or unlocked.
In addition to lasting twice as long as standard key-locking door handles, these mortise mount into a cutout in the door to withstand vandalism.
Lock and unlock the outside of these handles with their own unique keys. The inside handle can always open the door.
For frequently used doors, these handles last twice as long as standard master keyed key-locking door handles.
For frequently used doors, these handles last twice as long as standard keyed alike key-locking door handles.
For frequently used doors, these handles last twice as long as standard key-locking door handles.
These knobs open with a master key and their own keys. The inside knob opens the door whether it is locked or unlocked.
Install your own compatible lock cylinder to lock these knobs from the outside. The inside knob can always open the door.
Lock and unlock each of these knobs with the same key. The inside knob can always open the door.
These knobs can always be opened from the inside, while the locks on the outside each open with a different key.
For frequently used doors, these knobs last twice as long as standard key-locking door knobs.
The movement of the lever from opening and closing the door generates the power these handles need. They are programmable so you can assign different combinations to different people and restrict access when necessary.
These handles accept optional HID-compatible proximity cards or key fobs to regulate access for up to 2,000 employees. They are programmable so you can assign different combinations to different people and restrict access when necessary.
Open the outside handle with a combination or the included key; the inside handle is always unlocked.
The easy-to-read backlit screen turns on when touched and enters sleep mode when inactive to conserve battery life. Open the outside handle with a combination or the included key; the inside handle is always unlocked.
Gain access from the outside with a combination; the inside handle is always unlocked.
To gain access from the outside with a key as well as a combination, these handles accept an easy-change lock cylinder. The inside handle is always unlocked.
Unlock the outside knob with a combination; the inside knob is always unlocked.
Unlock these knobs with a master key and a key unique to that door. They are always locked from the outside, but doors can be opened from the inside knob.
Install a compatible lock cylinder to keep these knobs locked from the outside. You can always open them with the inside knob.
For frequently used doors, these handles last twice as long as standard keyed alike self-locking door handles.
Use the same key to open multiple handles. The outside handle is always locked, and the inside handle can always open the door.
These knobs are always locked from the outside. Unlock multiple knobs with the same key, or turn the inside knob to open.
For frequently used doors, these handles last twice as long as standard master keyed self-locking door handles.
The outside of these handles is always locked, and can be unlocked with a unique key. The inside handle can always open the door.
For frequently used doors, these handles last twice as long as standard self-locking door handles without lock cylinders.
For frequently used doors, these handles last twice as long as standard self-locking door handles.
Each of these knobs opens with its own key. The outside handle is always locked, but you can open the door from inside.
These handles are always locked from the outside, but open with a master key and their own keys.
For frequently used doors, these knobs last twice as long as standard self-locking door knobs.
Use any compatible lock cylinder with these handles. The outside handle is always locked, but you can open the door from the inside.
In addition to lasting twice as long as standard self-locking door handles, these mortise mount into a cutout in the door to withstand vandalism.
In addition to lasting twice as long as standard door knobs, these are made entirely of corrosion-resistant materials to stand up to washdown and marine environments.
In addition to lasting twice as long as standard door handles, these mortise mount into a cutout in the door to withstand vandalism.
Also known as passage handles, these do not lock.
For frequently used doors, these knobs last twice as long as standard door knobs.
For frequently used doors, these handles last twice as long as standard door handles.
Also known as passage knobs, these knobs do not lock.
Lock the outside knob with the button on the inside knob.
Lock the outside handle with the button on the inside handle.
For frequently used doors, these knobs last twice as long as standard button-locking door knobs.
For frequently used doors, these handles last twice as long as standard button-locking door handles.
Choose these knobs if you need to open multiple doors with the same key. They also lock and unlock with a button on the inside.
Choose these knobs if you want to use your own compatible lock cylinders.
For frequently used doors, these handles last twice as long as standard key- and button-locking door handles without lock cylinders.
For frequently used doors, these handles last twice as long as standard keyed alike key-and button-locking door handles.
These handles lock and unlock with a button on the inside or a key on the outside; they all share the same key.
For frequently used doors, these knobs last twice as long as standard key- and button-locking door knobs.
Lock and unlock these handles with a button on the inside or a key on the outside. Handles each open with a different key.
For frequently used doors, these handles last twice as long as standard master keyed key- and button-locking door handles.
These knobs lock and unlock with a button on the inside or their own unique keys.
Unlock these handles with a shared master key and a key unique to that door; they lock with a button on the inside handle.
Open these knobs with both a shared master key and key unique to that door, or use the button on the inside.
For frequently used doors, these handles last twice as long as standard key- and button-locking door handles.
Choose these handles if you want to use your own compatible lock cylinders.
Designed to withstand vandalism better than other deadbolt locks for double doors, these mortise mount into a cutout in the doors.
Enter a combination and turn the turnpiece to unlock these locks from the outside; they automatically lock when you close the door.
Gain access from the outside with a combination or an included key. These automatically lock when you close the door.
Enter a combination and turn the turnpiece to unlock these locks from the outside; turn the inside or outside turnpiece to manually relock them.
Often used on restroom doors, a message on the outside of the door changes when the lock is engaged or disengaged. Locks open with a turnpiece inside and an emergency access tool outside.
A guard over the latch prevents tampering.
Use the same key to lock and unlock multiple deadbolts, or use the turnpiece on the inside to open the door.
Lock and unlock the deadbolt with a turnpiece on the inside and a key on the outside. These locks each have different keys.
A slight push or pull on the lever opens your door.
Choose these locks if you need locks that each open with a different key and also open with a master key.
With these locks, users can select any locker that's not being used, create their own combination, and secure their items. Once they open the lock, it automatically resets for the next user.
Close the locker door and turn the dial to lock.
These locks automatically lock when the locker door is closed.
Press these wing head nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers.
Press these rounded head nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers.
Press these wing head nuts into the backside of a panel in applications where you have access to both sides of the panel. A quarter-turn locks and releases access panels, doors, and covers.
Press these rounded head nuts into the backside of a panel in applications where you have access to both sides of the panel. A quarter-turn locks and releases access panels, doors, and covers.
Rivet these wing head nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers.
These rounded head nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers.
These wing-head screws have a clip-on nut that allows you to mount them near the edge of a thin panel. Use them to lock and release access panels, doors, and covers with a quarter-turn.
These rounded head screws have a nut that clips onto the edge of a thin panel, allowing you to mount the screw near edges. A quarter-turn locks and releases access panels, doors, and covers.
Couplings have an identical claw-style head that connects to another twist-claw hose coupling with a quarter twist.
Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.
Also known as Chicago and universal couplings, these have identical claw-style heads and connect by being pushed together with a quarter twist.
Couplings are only compatible with other extra-large twist-claw hose couplings. Use with tools and equipment up to 2 pipe size.
These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.
Also known as Thor couplings, these have two locking points to give you twice the gripping power of standard grip-lock couplings. They consist of a plug and a socket that connect with a quarter twist.
Use these fittings with sand, steel shot, and other abrasive material. They have a unique claw-style head that connects to other abrasive-material hose fittings with a quarter twist.
Create lightweight adjustable structures. With telescoping aluminum rails, this framing is often used to make folding stands, extension poles, and sign frames.