Design a stack light with your choice of light pattern and color. Start with a base, then add up to five modules total—twist and lock them together. All components except for replacement bulbs meet NEMA 4X for protection from corrosion and washdowns.

Sound module must be placed in the top position.

LED bulbs last longer than incandescent bulbs and provide years of maintenance-free operation.

For technical drawings and 3-D models, click on a part number.

Mount these lights horizontally or vertically in places where a tower will not fit. The LED bulbs provide years of maintenance-free operation. Lights meet IP54 for use in environments with splashing water.

For technical drawings and 3-D models, click on a part number.

Choose from seven colors, including nontraditional colors such as magenta and turquoise, for a custom four-light stack light. Assign colors by pushing your machine's wire leads into the spring-clamp terminals in the light's base. As your operations change, update the colors by opening the base and rearranging the wire connections. Lights have LED bulbs for years of maintenance-free operation. They have clear lenses, which are helpful in bright environments where it can be difficult to see whether a light is on or off. They meet IP66 for protection from high-pressure washdowns.

The quick-connect four-pole M12 plug on these lights makes them easy to hook up and configure. Mount the male thread on the bottom of the light through a hole and then secure using the included nut and sealing gasket. Lights have LED bulbs for years of maintenance-free operation. They meet IP65 for protection from washdowns.

For technical drawings and 3-D models, click on a part number.

Give a signal with the push of a button. These lights have a control box with a button for activating each of the three light modules. The LED bulbs provide years of maintenance-free operation.The light modules meet IP54 and the control box meets IP20. They cannot be sold to the regions listed due to local energy efficiency requirements.

Mount the light by bolting the included bracket to a surface (fasteners not included) or clamping it over a surface such as an office partition or workstation. You can adjust the height of the light by using either the included 3 1/2” or 11 3/8” mounting poles.

Mount the control box using the included tape with adhesive on both sides. It connects to the light via a 4-ft. connecting cable.

For technical drawings and 3-D models, click on a part number.

These lights have LED bulbs for years of maintenance-free operation and can be wired as either continuous or flashing. The beep or buzzer alerts workers when they're outside a direct line of sight. Lights meet IP65 for protection from washdowns.

Replacement mounting pipes can be cut to length. Use them to lengthen the existing pipe or to replace it entirely.

For technical drawings and 3-D models, click on a part number.

No need for wiring—these lights plug-in with a two-prong plug. Also known as shop lights. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They emit a neutral white light often found in workspaces. A smooth, frosted lens disperses light evenly. Suspend from the ceiling with the included mounting hardware.