Filter by
OD
Lubrication
Material
Dynamic Thrust Load Capacity
Shape
Static Thrust Load Capacity
Power Source
Bearing Type
Static Moment Load Capacity
Static Radial Load Capacity
Mounting Hole Location
Finish
Dynamic Radial Load Capacity
Export Control Classification Number (ECCN)
DFARS Specialty Metals
REACH
RoHS
Mounting Hole Type
Performance
Maintenance-Free Turntable Bearings
![]() |
![]() |
Turntable Bearings with Gear Teeth |
With low-friction internal sleeves made of PTFE, these bearings never need lubrication. Also known as slewing-ring bearings, they’re used for slow, controlled rotation. You’ll often see them rotating hoists, robotic arms, and other heavy machinery. They have holes on both the inner and outer ring, so they’re easy to align and mount.
Note: Listed capacities only apply when bearings are mounted parallel to the ground. These bearings can be mounted in other orientations, but their capacities will be reduced.
Turntable Bearings with Gear Teeth—Bearings with gear teeth can be driven by a spur gear. For components to mesh correctly, they must have the same pressure angle and module.
Thrust Load Cap., lb. | Radial Load Cap., lb. | Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dynamic | Static | Dynamic | Static | Static Moment Load Cap., ft·lbf | OD, mm | ID, mm | Overall Ht., mm | Gear Module | Pressure Angle | Material | Type | Material | Plain Bearing Type | Mounting Fasteners Included | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Combined Radial, Thrust, and Moment Loads | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Turntable Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
890 | 3,350 | 130 | 500 | 70 | 80 | 20 | 24 | — | — | Anodized Aluminum | Plain | PTFE | Sleeve | No | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1,550 | 6,000 | 330 | 1,100 | 140 | 100 | 30 | 29 | — | — | Anodized Aluminum | Plain | PTFE | Sleeve | No | 000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2,200 | 8,950 | 560 | 1,750 | 440 | 150 | 50 | 33 | — | — | Anodized Aluminum | Plain | PTFE | Sleeve | No | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3,350 | 11,200 | 670 | 2,200 | 590 | 160 | 60 | 33 | — | — | Anodized Aluminum | Plain | PTFE | Sleeve | No | 000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3,550 | 12,350 | 1,100 | 3,550 | 1,100 | 185 | 100 | 34 | — | — | Anodized Aluminum | Plain | PTFE | Sleeve | No | 000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5,600 | 17,950 | 1,750 | 5,600 | 1,450 | 250 | 150 | 35 | — | — | Anodized Aluminum | Plain | PTFE | Sleeve | No | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6,700 | 22,450 | 2,200 | 7,850 | 2,800 | 300 | 200 | 38 | — | — | Anodized Aluminum | Plain | PTFE | Sleeve | No | 000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20,200 | 33,700 | 6,050 | 10,100 | 3,650 | 450 | 300 | 42 | — | — | Anodized Aluminum | Plain | PTFE | Sleeve | No | 0000000 | 00000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Turntable Bearings with Gear Teeth | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
890 | 3,350 | 130 | 500 | 70 | 88 | 20 | 26 | 2 | 20° | Anodized Aluminum | Plain | PTFE | Sleeve | No | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1,550 | 6,000 | 330 | 1,100 | 140 | 112 | 30 | 31 | 2 | 20° | Anodized Aluminum | Plain | PTFE | Sleeve | No | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2,200 | 8,950 | 560 | 1,750 | 440 | 160 | 50 | 33 | 2 | 20° | Anodized Aluminum | Plain | PTFE | Sleeve | No | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3,350 | 11,200 | 670 | 2,200 | 590 | 184 | 60 | 35 | 2 | 20° | Anodized Aluminum | Plain | PTFE | Sleeve | No | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3,550 | 12,350 | 1,100 | 3,550 | 1,100 | 196 | 100 | 36 | 2 | 20° | Anodized Aluminum | Plain | PTFE | Sleeve | No | 00000000 | 00000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5,600 | 17,950 | 1,750 | 5,600 | 1,450 | 256 | 150 | 38 | 2 | 20° | Anodized Aluminum | Plain | PTFE | Sleeve | No | 00000000 | 00000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6,700 | 22,450 | 2,200 | 7,850 | 2,800 | 308 | 200 | 42 | 2 | 20° | Anodized Aluminum | Plain | PTFE | Sleeve | No | 00000000 | 00000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20,200 | 33,700 | 6,050 | 10,100 | 3,650 | 462 | 300 | 44 | 3 | 20° | Anodized Aluminum | Plain | PTFE | Sleeve | No | 00000000 | 00000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Low-Profile Maintenance-Free Turntable Bearings
![]() |
At 16 mm tall, these bearings are about the height of your typical plastic water bottle cap, so they won’t bulk up your builds. They handle radial, thrust, and moment loads. Often used to oscillate heavy equipment, find them rotating hoists or spinning components on robotic arms. The internal sleeve moves smoothly and will never require lubrication. For easy alignment and mounting, these bearings have holes on both the inner and outer ring. They’re also known as slewing-ring bearings.
Note: Listed capacities only apply when bearings are mounted parallel to the ground. Otherwise, they reduce when bearings are tilted.
Thrust Load Cap., lb. | Radial Load Cap., lb. | Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dynamic | Static | Dynamic | Static | Static Moment Load Cap., ft·lbf | OD, mm | ID, mm | Overall Ht., mm | Material | Type | Material | Plain Bearing Type | Mounting Fasteners Included | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Combined Radial, Thrust, and Moment Loads | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
670 | 2,650 | 160 | 560 | 140 | 110 | 50 | 16 | Anodized Aluminum | Plain | PTFE | Sleeve | No | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
890 | 3,100 | 200 | 670 | 180 | 120 | 60 | 16 | Anodized Aluminum | Plain | PTFE | Sleeve | No | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1,100 | 4,450 | 330 | 330 | 330 | 160 | 100 | 16 | Anodized Aluminum | Plain | PTFE | Sleeve | No | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1,650 | 6,050 | 420 | 1,450 | 470 | 210 | 150 | 16 | Anodized Aluminum | Plain | PTFE | Sleeve | No | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2,000 | 7,850 | 560 | 1,750 | 640 | 260 | 200 | 16 | Anodized Aluminum | Plain | PTFE | Sleeve | No | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2,650 | 10,750 | 780 | 2,200 | 880 | 360 | 300 | 16 | Anodized Aluminum | Plain | PTFE | Sleeve | No | 0000000 | 00000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Food and Beverage Maintenance-Free Turntable Bearings
![]() |
Made of stainless steel and plastic, these bearings are FDA compliant for direct contact with food. Their low-friction internal sleeves never need to be lubricated. Often used to turn conveyors or spin mixers, these bearings are designed for slow, controlled rotation. They have holes on both the inner and outer ring, so they’re easy to align and mount. They’re also known as slewing-ring bearings.
Note: Listed capacities only apply when bearings are mounted parallel to the ground. These bearings can be mounted in other orientations, but their capacities will be reduced.
Thrust Load Cap., lb. | Radial Load Cap., lb. | Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dynamic | Static | Dynamic | Static | Static Moment Load Cap., ft·lbf | OD, mm | ID, mm | Overall Ht., mm | Material | Type | Material | Plain Bearing Type | Mounting Fasteners Included | Food Industry Std. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Combined Radial, Thrust, and Moment Loads | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
890 | 3,350 | 130 | 500 | 70 | 80 | 20 | 24 | Stainless Steel | Plain | Plastic | Sleeve | No | FDA Compliant 21 CFR 177.1550 | 0000000 | 000000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3,350 | 11,200 | 670 | 2,200 | 590 | 160 | 60 | 33 | Stainless Steel | Plain | Plastic | Sleeve | No | FDA Compliant 21 CFR 177.1550 | 0000000 | 00000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5,600 | 17,950 | 1,790 | 5,600 | 1,450 | 250 | 150 | 35 | Stainless Steel | Plain | Plastic | Sleeve | No | FDA Compliant 21 CFR 177.1550 | 0000000 | 00000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6,700 | 22,450 | 2,240 | 7,850 | 2,800 | 300 | 200 | 38 | Stainless Steel | Plain | Plastic | Sleeve | No | FDA Compliant 21 CFR 177.1550 | 0000000 | 00000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Static-Control Maintenance-Free Turntable Bearings
![]() |
Safe enough to rotate equipment in microchip and semiconductor manufacturing, these bearings prevent harmful static buildup. They’re made from stainless steel and have specially formulated PTFE sleeves that work together to drain static. Make sure your set up provides a path to the ground.
Also known as slewing-ring bearings, these bearings are great for turning heavy equipment in a slow and controlled way. Their sleeves are also slippery, so they move smoothly and don't require lubrication. For alignment and mounting, they have holes on both the inner and outer ring.
Note: Listed capacities only apply when bearings are mounted parallel to the ground. These bearings can be mounted in other orientations, but their capacities will be reduced.
Thrust Load Cap., lb. | Radial Load Cap., lb. | Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dynamic | Static | Dynamic | Static | Static Moment Load Cap., ft·lbf | OD, mm | ID, mm | Overall Ht., mm | Material | Type | Material | Plain Bearing Type | Mounting Fasteners Included | Performance | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Combined Radial, Thrust, and Moment Loads | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1,550 | 6,050 | 330 | 1,100 | 140 | 100 | 30 | 29 | Stainless Steel | Plain | PTFE | Sleeve | No | Antistatic | 00000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2,200 | 8,950 | 560 | 1,750 | 440 | 150 | 50 | 33 | Stainless Steel | Plain | PTFE | Sleeve | No | Antistatic | 00000000 | 00000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3,350 | 11,200 | 670 | 2,200 | 590 | 160 | 60 | 33 | Stainless Steel | Plain | PTFE | Sleeve | No | Antistatic | 00000000 | 00000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3,550 | 12,350 | 1,100 | 3,550 | 1,100 | 185 | 100 | 34 | Stainless Steel | Plain | PTFE | Sleeve | No | Antistatic | 00000000 | 00000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5,600 | 17,950 | 1,750 | 5,600 | 1,450 | 250 | 150 | 35 | Stainless Steel | Plain | PTFE | Sleeve | No | Antistatic | 00000000 | 00000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20,200 | 33,700 | 6,050 | 10,100 | 3,650 | 450 | 300 | 42 | Stainless Steel | Plain | PTFE | Sleeve | No | Antistatic | 00000000 | 00000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||