Hollow Rivets
Use these rivets to fasten soft material such as leather, fabric, and plastic. Installation requires access to both sides of the material. Use a hollow rivet tool (sold separately) and a hammer to flare out the hollow portion of the rivet.
Hollow-end rivets are also known as semi-tubular and brake-lining rivets. The bottom half of the body is hollow and because it is the only part of the rivet that expands during installation, they are often used as pivot points.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Internal Hole Dp. | Countersink Angle  | Material | Pkg. Qty. | Pkg. | |
9/64" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.159"-0.173" | 0.25" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 000000 |
| 0.19"-0.204" | 0.281" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.221"-0.235" | 0.313" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.221"-0.235" | 0.313" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.284"-0.298" | 0.375" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.284"-0.298" | 0.375" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.346"-0.36" | 0.438" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.346"-0.36" | 0.438" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.409"-0.423" | 0.5" | 0.156" | No. 23 | 0.313" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.409"-0.423" | 0.5" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.534"-0.548" | 0.625" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.659"-0.673" | 0.75" | 0.156" | No. 23 | 0.375" | 0.047" | 0.125" | 150° | Brass | 50 | 000000000 | 00000 |
3/16" Dia. | |||||||||||
| 0.128"-0.147" | 0.25" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.191"-0.209" | 0.313" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.253"-0.272" | 0.375" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 100 | 000000000 | 00000 |
| 0.316"-0.334" | 0.438" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.378"-0.397" | 0.5" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.378"-0.397" | 0.5" | 0.199" | No. 8 | 0.5" | 0.063" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.441"-0.459" | 0.563" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.503"-0.522" | 0.625" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.503"-0.522" | 0.625" | 0.199" | No. 8 | 0.5" | 0.063" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.628"-0.647" | 0.75" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.628"-0.647" | 0.75" | 0.199" | No. 8 | 0.5" | 0.063" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.753"-0.772" | 0.875" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.753"-0.772" | 0.875" | 0.199" | No. 8 | 0.5" | 0.063" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.878"-0.897" | 1" | 0.199" | No. 8 | 0.375" | 0.047" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
| 0.878"-0.897" | 1" | 0.199" | No. 8 | 0.5" | 0.063" | 0.188" | 150° | Brass | 50 | 000000000 | 00000 |
1/4" Dia. | |||||||||||
| 0.338"-0.363" | 0.5" | 0.265" | 17/64" | 0.5" | 0.063" | 0.25" | 150° | Brass | 25 | 000000000 | 0000 |
| 0.463"-0.488" | 0.625" | 0.265" | 17/64" | 0.5" | 0.063" | 0.25" | 150° | Brass | 25 | 000000000 | 00000 |
| 0.588"-0.613" | 0.75" | 0.265" | 17/64" | 0.5" | 0.063" | 0.25" | 150° | Brass | 25 | 000000000 | 00000 |
| 0.713"-0.738" | 0.875" | 0.265" | 17/64" | 0.5" | 0.063" | 0.25" | 150° | Brass | 25 | 000000000 | 00000 |
| 0.838"-0.863" | 1" | 0.265" | 17/64" | 0.5" | 0.063" | 0.25" | 150° | Brass | 25 | 000000000 | 00000 |
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Internal Hole Dp. | Countersink Angle | Material | Pkg. Qty. | Pkg. | |
9/64" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.147"-0.167" | 0.25" | 0.152" | No. 24 | 0.313" | 0.047" | 0.219" | 150° | Copper-Plated Steel | 50 | 000000000 | 000000 |
| 0.272"-0.292" | 0.375" | 0.152" | No. 24 | 0.313" | 0.047" | 0.313" | 150° | Copper-Plated Steel | 50 | 000000000 | 00000 |
Two-Piece Press-Fit Rivets for Leather and Fabric
Also known as slam rivets, the two heads provide a finished look on both sides of your material. Use a hammer or press to join the mating parts. Access to both sides of the material is required.
Stainless steel rivets are more corrosion resistant than nickel-plated steel and nickel-plated brass rivets.
For technical drawings and 3-D models, click on a part number.
| Dia. | For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Pkg. Qty. | Pkg. | |
Nickel-Plated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.13" | 0.188"-0.219" | 0.341" | 0.157" | No. 22 | 0.5" | 0.09" | 50 | 000000000 | 00000 |
| 0.134" | 0.177"-0.25" | 0.24" | 0.094" | 3/32" | 0.375" | 0.09" | 100 | 000000000 | 0000 |
Nickel-Plated Brass | |||||||||
| 0.134" | 0.025"-0.25" | 0.297" | 0.15" | 1/8" | 0.275" | 0.06" | 50 | 000000000 | 00000 |
| 0.15" | 0.06"-0.19" | 0.33" | 0.15" | 1/8" | 0.38" | 0.09" | 50 | 000000000 | 0000 |
Stainless Steel | |||||||||
| 0.15" | 0.138"-0.197" | 0.275" | 0.15" | 1/8" | 0.52" | 0.12" | 25 | 000000000 | 0000 |
Two-Piece Press-Fit Rivets for Wood
Also known as cutlery rivets, the two heads provide a finished look on both sides of your material. Use a hammer or press to join the mating parts. Access to both sides of the material is required.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Material | Pkg. Qty. | Pkg. | |
0.112" Dia. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.375"-0.563" | 0.375" | 0.125"-0.145" | 1/8" | 0.188" | 0.06" | Brass | 10 | 000000000 | 000000 |
0.149" Dia. | |||||||||
| 0.5"-0.75" | 0.5" | 0.165"-0.185" | No. 19 | 0.313" | 0.045" | Brass | 10 | 000000000 | 0000 |
| 0.625"-0.875" | 0.625" | 0.165"-0.185" | No. 19 | 0.313" | 0.045" | Brass | 10 | 000000000 | 00000 |