About Selecting Thermal Insulation
More
About Pressure Reductions for High-Temperature Braided Hose
More
About Duct Hose
More
About Hose
More
Extreme-Temperature Air and Steam Hose with Male Threaded Fittings
- Maximum Vacuum: 29" of Hg @ 72° F
- Temperature Range: -325° to 1,200° F
- Material: 316 Stainless Steel or 321 Stainless Steel
Braided stainless steel construction gives this hose moderate flexibility and makes it tough enough to handle extreme temperatures, as well as vibration.
Single-braided hose with 304 stainless steel NPT threaded fittings have a steel hex nut.
Extreme-Temperature Air and Steam Hose with Flanges
- Temperature Range:
316 Stainless Steel Hose: -325° to 1200° F
321 Stainless Steel Hose: -20° to 950° F - Maximum Vacuum: 29" of Hg @ 72° F
- Material: 316 Stainless Steel or 321 Stainless Steel
Braided stainless steel construction gives this hose moderate flexibility and makes it tough enough to handle extreme temperatures, as well as vibration. Bolt the flanged ends to pumps and tanks. You’ll need a gasket to seal the connection. Flanges that swivel until tightened are easy to align with bolt holes.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flange OD | ID | OD | Bend Radius | Bolt Circle Dia. | No. of Bolt Holes | Max. Pressure | 12" | 18" | 24" | 30" | 36" | 42" | 48" | 60" | 72" | 96" | 120" | |
316 Stainless Steel Hose with 316 Stainless Steel Flanged Fittings | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 × 4 | 9" × 9" | 4" | 5 1/8" | 22" | 7 1/2" × 7 1/2" | 8 | 275 psi @ 72° F | 0000000 | |||||||||||
321 Stainless Steel Hose with Steel Flanged Fittings | |||||||||||||||||||
| 4 × 4 | 9" × 9" | 4" | 5 1/8" | 22" | 7 1/2" × 7 1/2" | 8 | 285 psi @ 72° F | 000000 | |||||||||||
| Pipe Size | Flange OD | ID | OD | Bend Radius | Bolt Circle Dia. | No. of Bolt Holes | Max. Pressure | 18" | 24" | 30" | 36" | 42" | 48" | 60" | 72" | 96" | 120" | |
316 Stainless Steel Hose with 316 Stainless Steel Flanged Fittings | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 × 4 | 9" × 9" | 4" | 5 1/8" | 22" | 7 1/2" × 7 1/2" | 8 | 275 psi @ 72° F | 0000000 | ||||||||||
321 Stainless Steel Hose with Steel Flanged Fittings | ||||||||||||||||||
| 4 × 4 | 9" × 9" | 4" | 5 1/8" | 22" | 7 1/2" × 7 1/2" | 8 | 285 psi @ 72° F | 0000000 | ||||||||||
High-Temperature Rigid Metal Duct Hose for Fumes
- Rigid
- Compatible Clamps: U-Bolt Clamps
- Max. Temperature: Galvanized Steel: 750° F; Aluminum: 450° F; 304 Stainless Steel: 1500° F; 316 Stainless Steel: 1200° F
Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures. Hose is for use with smoke, welding fumes, and oil fumes.
304 stainless steel has very good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
High-Temperature Flexible Duct Hose for Dust
- Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Black
- Temperature Range: -60° to 300° F
The neoprene coating on this hose holds up under high heat. Hose meets UL 94 V-0 for flame retardance. It has a smooth interior for unrestricted flow. Hose is for use with lint, dust, and sawdust.
Warning: Hose should not be used for applications that generate a static charge.
For technical drawings and 3-D models, click on a part number.
Spiral | Per Ft. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Specifications Met | Max. Continuous Lg., ft. | 1-11 | 12-Up | |
Neoprene-Coated Fiberglass | ||||||||||||||
| 5" | 5 1/8" | 5" | 60% | 10 in. of Hg @ 72° F | 14 psi @ 72° F | 0.024" | Smooth | Left Hand | Metal | UL 94 V-0 | 12 | 00000000 | 000000 | 000000 |
Heat-Reflective Duct Hose for Air
- Flexible
- Compatible Clamps: Worm-Drive and Quick-Release Clamps
- Color: Silver
- Temperature Range: -65° to 625° F
A metalized polyester cover reflects heat so the temperature inside the hose won't rise. Hose has a smooth interior for unrestricted flow.
Spiral | Per Ft. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Max. Continuous Lg., ft. | 1-11 | 12-Up | |
Fiberglass Hose with Metalized Polyester Cover | |||||||||||||
| 5" | 5 1/8" | 3 1/2" | 25% | 14 in. of Hg @ 72° F | 28 psi @ 72° F | 0.027" | Smooth | Right Hand | Metal | 12 | 0000000 | 000000 | 000000 |
Flexible Rubber Foam Pipe Insulation
Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.
Slit tubes have an adhesive strip closure.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -295° to 220° F
- Heat Flow Rate: 0.25 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Black
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534
- Temperature Range: -295° to 220° F
- Heat Flow Rate: 0.25 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Black
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534
- Temperature Range: -295° to 220° F
- Heat Flow Rate: 0.25 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Black
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534
Economical Flexible Polyethylene Foam Pipe Insulation
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -295° to 200° F
- Heat Flow Rate: 0.270 Btu @ 75° F
- Density: 1.5 lbs./cu. ft.
- Color: See table
- Specifications Met: See table
Fiberglass Pipe Insulation
This common insulation material is typically used on hot and cold water lines and in process piping. To use outdoors, add metal jacketing.
Tubes, elbows, and tees are formed to provide the best fit on pipe and are the easiest to install. If your pipe is larger than the sizes we offer, choose a sheet/strip.
Tubes have an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal with reinforced insulation tape (sold separately).
For technical drawings and 3-D models, click on a part number.
- Temperature Range: 0° to 850° F
- Jacket Temperature Range: -20° to 150° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Yellow
- Jacket Color: White
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C547, ASTM C585
- Temperature Range: 0° to 1000° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 5 lbs./cu. ft.
- Color: Brown
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585
- Temperature Range: 0° to 1000° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 5 lbs./cu. ft.
- Color: Brown
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585
Chemical-Resistant Cellular Glass Pipe Insulation
Very rigid with a 0% water absorption rate, this insulation is unaffected by corrosive environments, organic solvents, and most acids. It is typically used in chemical-processing systems and underground lines. Insulation is flame resistant, meeting ASTM E84 0/0 for flame and smoke. Seal with tape (sold separately). Outdoor and underground use require metal jacketing (sold separately).
Tubes have a kraft paper jacket with an adhesive strip for sealing.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -450° to 900° F
- Jacket Temperature Range: -40° to 240° F
- Heat Flow Rate: 0.29 Btu @ 75° F
- Density: 7.5 lbs./cu. ft.
- Color: Black
- Jacket Color: White
- Specifications Met: ASTM C522 Grade 6, ASTM E84 0/0 for Flame and Smoke
Ultra-Insulating Low-Temperature Polyisocyanurate Foam Pipe Insulation
This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F. To use outdoors, add metal jacketing.
Tubes have a kraft paper all-service jacket (ASJ) that resists mold and mildew by allowing moisture to evaporate. They have an adhesive strip closure.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -295° to 300° F
- Jacket Temperature Range: -40° to 240° F
- Heat Flow Rate: 0.17 Btu @ 75° F
- Density: 2 lbs./cu. ft.
- Color: Green
- Jacket Color: White
- Specifications Met: ASTM E84 25/50 for Flame and Smoke
2" Wall Thick. | |||||||
|---|---|---|---|---|---|---|---|
| ID | For Pipe Size | For Copper Tube Size | Lg., ft. | Flexibility | R Value | Each | |
| 1 1/8" | 3/4 | 1 | 3 | Rigid | 11.8 | 00000000 | 000000 |
- Temperature Range: -295° to 300° F
- Heat Flow Rate: 0.17 Btu @ 75° F
- Density: 2 lbs./cu. ft.
- Color: Green
- Specifications Met: ASTM E84 25/50 for Flame and Smoke
2" Wall Thick. | ||||||
|---|---|---|---|---|---|---|
| ID | For Pipe Size | For Copper Tube Size | Flexibility | R Value | Each | |
| 1 1/8" | 3/4 | 1 | Rigid | 11.8 | 00000000 | 000000 |
- Temperature Range: -295° to 300° F
- Heat Flow Rate: 0.17 Btu @ 75° F
- Density: 2 lbs./cu. ft.
- Color: Green
- Specifications Met: ASTM E84 25/50 for Flame and Smoke
2" Wall Thick. | ||||||
|---|---|---|---|---|---|---|
| ID | For Pipe Size | For Copper Tube Size | Flexibility | R Value | Each | |
| 1 1/8" | 3/4 | 1 | Rigid | 11.8 | 00000000 | 000000 |