2 3/8" Tubing | McMaster-Carr

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications. It’s made of FDA listed materials, so it’s suitable for use with food and beverage. Free of plasticizers like DEHP, it won’t impart tastes or odors to the fluid passing through it.

PVC tubing has harder walls than polyethylene tubing and can handle higher pressures. It meets NSF/ANSI Standard 51 for food contact. Tubing is rigid and will not bend. It is clear, so you can easily monitor flow.

For technical drawings and 3-D models, click on a part number.

Clear PVC Plastic

Clear PVC Plastic Tubing

Clear

Rigid
Compatible with Socket Connect Tube Fittings
Hard (Durometer 80D)
Temperature Range: -40° to 140° F
Specifications Met: FDA Compliant 21 CFR 175.300, NSF/ANSI 51

ID	OD	Wall Thick.	Max. Pressure	Max. Vacuum	Color		1 ft.	3 ft.	6 ft.
2 3/8"	2 1/2"	1/16"	50 psi @ 72° F	28 in. of Hg @ 72° F	Clear	00000000	000000	000000	000000

High-Temperature Coolant Hose

Temperature Range: -65° to 350° F
Material: Silicone Rubber
Color: Blue
For Clamp Type: Worm Drive

Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions. Hose with steel wire reinforcement resists kinking.

For technical drawings and 3-D models, click on a part number.

						Per Ft.
ID	OD	Max. Pressure	Internal Reinforcement	Max. Continuous Lg., ft.		1-11	12-Up
2 3/8"	2 3/4"	40 psi @ 72° F	Yarn	12	00000000	000000	000000
2 3/8"	2 3/4"	100 psi @ 72° F	Steel Wire	12	0000000	00000	00000

Coolant Hose

Temperature Range: 0° to 210° F
Material: Buna-N Rubber
Color: Black with Green Stripe
For Clamp Type: Worm Drive

Commonly known as radiator hose, this hose is for low-pressure coolant applications.

For technical drawings and 3-D models, click on a part number.

					Per Ft.
ID	OD	Max. Pressure	Max. Continuous Lg., ft.		1-24	25-Up
2 3/8"	2 7/8"	35 psi @ 72° F	25	00000000	000000	000000

Flexible Coolant Hose

Temperature Range: -20° to 210° F
Maximum Vacuum: 28" of Hg @ 72° F
Material: Buna-N Rubber with Neoprene Rubber Cover
Color: Black with Yellow Stripe
For Clamp Type: Worm Drive

With a tighter bend radius than other coolant hose, this hose can easily twist and turn around equipment.

For technical drawings and 3-D models, click on a part number.

						Per Ft.
ID	OD	Bend Radius	Max. Pressure	Max. Continuous Lg., ft.		1-24	25-Up
2 3/8"	2 7/8"	7 1/8"	30 psi @ 72° F	25	0000000	000000	000000

Extreme-Temperature Coolant Hose

Temperature Range: -65° to 500° F
Material: Silicone Rubber
Color: Red
For Clamp Type: Worm Drive

Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer. It’s designed to handle the heat of a turbocharged engine. The reinforcement also makes it last longer than standard silicone rubber coolant hose when exposed to extreme vibration.

For technical drawings and 3-D models, click on a part number.

ID	OD	Max. Pressure	Internal Reinforcement	Lg., ft.		Each
2 3/8"	2 5/8"	30 psi @ 72° F	Aramid Fabric	3	0000000	000000

Ultra-High-Vacuum Hose with Flanges

Often found in semiconductor manufacturing and other demanding industrial applications, this hose handles nearly perfect vacuum. Sharp edges on the flanges dig into a copper gasket (sold separately) as you bolt the flanges together, creating a tighter seal than fittings with a rubber gasket. This allows the hose to maintain the ultra-high vacuum necessary for vacuum coating, heat treating, leak testing, and analyzing gases. The flanges are commonly referred to as ConFlat (CF) and UHV fittings. Thanks to its ribbed interior, this hose is flexible enough to connect misaligned components. That's why it's also called a bellows. The ribbing reduces vibration between components, such as vacuum pumps, valves, and chambers. Both the hose and flanges are made of stainless steel, so they resist rusting.

One of the flanges rotates, so you can easily match up the bolt holes with another flange. Make sure your mating flanges are the same size as these flanges.

Bolt kits are required to make a complete connection.

For technical drawings and 3-D models, click on a part number.

Hose

Temperature Range: -200° to 900° F
Maximum Vacuum: 10 ^-13 torr @ 72° F
Material: 321 Stainless Steel
Fitting Material: 304 Stainless Steel

									Bolt Hole
For Tube OD	Flange OD	High-Vacuum Flange Size	High Vacuum Connection Type	ID	OD	Wall Thickness	Bend Radius	Bolt Circle Dia.	Dia.	No. of		Each
Fixed Flange × Rotating Flange
6" Lg.
2 1/2"	4 1/2"	63	CF	2 3/8"	3 1/4"	0.008"	4 1/4"	3 5/8"	21/64"	8	00000000	0000000
12" Lg.
2 1/2"	4 1/2"	63	CF	2 3/8"	3 1/4"	0.008"	4 1/4"	3 5/8"	21/64"	8	00000000	000000
24" Lg.
2 1/2"	4 1/2"	63	CF	2 3/8"	3 1/4"	0.008"	4 1/4"	3 5/8"	21/64"	8	00000000	000000
36" Lg.
2 1/2"	4 1/2"	63	CF	2 3/8"	3 1/4"	0.008"	4 1/4"	3 5/8"	21/64"	8	00000000	000000

Gaskets

For Tube OD	For Flange OD	Gasket Material	Specifications Met		Each
2 1/2"	4 1/2"	Copper	ASTM F68	0000000	00000

Bolt Kits

For Flange OD	For High-Vacuum Flange Size	Bolt Dia.	Thread Size	No. of Bolts Included	No. of Nuts Included	No. of Washers Included	Bolt Material		Each
4 1/2"	63	5/16"	5/16"-24	8	8	16	18-8 Stainless Steel	0000000	000000

High-Temperature Rigid Metal Duct Hose for Fumes

Rigid
Compatible Clamps: U-Bolt Clamps
Max. Temperature: Galvanized Steel: 750° F; Aluminum: 450° F; 304 Stainless Steel: 1500° F; 316 Stainless Steel: 1200° F

Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures. Hose is for use with smoke, welding fumes, and oil fumes.

Galvanized steel offers fair corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Galvanized Steel
ID	OD	Bend Radius	Interior Surface Texture		5 ft.	6 ft.	7 ft.	8 ft.	9 ft.	10 ft.	15 ft.	20 ft.	25 ft.
0.012" Material Thick.
2 3/8"	2 1/2"	8"	Ribbed	0000000	000000	000000	000000	000000	000000	000000	000000	000000	000000

Clear Scratch- and UV-Resistant Cast Acrylic Tubes

Color: Clear
Temperature Range: 0° to 150° F
Tensile Strength: 10,000-11,250 psi (Good)
Impact Strength: 0.3-0.4 ft.-lbs./in. (Poor)
Hardness: Rockwell M94-M100 (Hard)
For Use Outdoors: Yes
Specifications Met: See table

Fabricate containers, tanks, and lenses for light fixtures with these scratch- and UV-resistant cast acrylic tubes. Cast acrylic, which is comparable to Lucite and Plexiglas® Acrylic, is easier to machine than extruded acrylic. This material stands up to outdoor use better than polycarbonate and maintains clarity over time.

For technical drawings and 3-D models, click on a part number.

3/16" Wall Thick.
OD	OD Tolerance	ID	Lengths, ft.	Specifications Met		Per Ft.
2 3/4"	-0.020" to 0.020"	2 3/8"	1, 3, 5	ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB	00000000	000000

Clear Impact-Resistant Polycarbonate Tubes

Color: Clear
Temperature Range: -40° to 200° F
Tensile Strength: 8,900-9,500 psi (Good)
Impact Strength: 12-18 ft.-lbs./in. (Excellent)
Hardness: Rockwell R118 (Hard)
For Use Outdoors: No

Comparable to Lexan, Hyzod, Tuffak, and Makrolon, these polycarbonate tubes are half the weight of glass and maintain excellent impact resistance across a wide temperature range. Use them to make instrument gauge covers and display racks.

For technical drawings and 3-D models, click on a part number.

Round Tubes

1/16" Wall Thick. (-0.0045" to 0.0055")
OD	OD Tolerance	ID	ID Tolerance	Specifications Met		1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	4 ft. Lg.	8 ft. Lg.
2 1/2"	-0.020" to 0.020"	2 3/8"	-0.020" to 0.020"	FDA Compliant 21 CFR 177.1580, UL 94 HB	0000000	000000	000000	000000	000000	000000

Flexible Rubber Foam Pipe Insulation

Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.

Slit tubes have an adhesive strip closure.

For technical drawings and 3-D models, click on a part number.

Slit Tubes

Slit Tube

Temperature Range: -295° to 220° F
Heat Flow Rate: 0.25 Btu @ 75° F
Density: 4.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534

1/2" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each
Buna-N/PVC Foam
2 3/8"	2	6	Flexible	2	00000000	000000
3/4" Wall Thick.
Buna-N/PVC Foam
2 3/8"	2	6	Flexible	3	00000000	00000
1" Wall Thick.
Buna-N/PVC Foam
2 3/8"	2	6	Flexible	4	00000000	00000

White Acrylic Coating (1-qt. Can)	00000000	Each	000000
Contact Adhesive (16-fl. oz. Brush-Top Can)	00000000	Each	00000

90° Elbows

Elbow

Temperature Range: -295° to 220° F
Heat Flow Rate: 0.25 Btu @ 75° F
Density: 4.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534

1/2" Wall Thick.
ID	For Pipe Size	Flexibility	Tube Style	R Value		Each
Buna-N/PVC Foam
2 3/8"	2	Flexible	Slit	2	00000000	00000
3/4" Wall Thick.
Buna-N/PVC Foam
2 3/8"	2	Flexible	Slit	3	00000000	00000
1" Wall Thick.
Buna-N/PVC Foam
2 3/8"	2	Flexible	Slit	4	00000000	00000

White Acrylic Coating (1-qt. Can)	00000000	Each	000000
Contact Adhesive (16-fl. oz. Brush-Top Can)	00000000	Each	00000

Tees

Tee

Temperature Range: -295° to 220° F
Heat Flow Rate: 0.25 Btu @ 75° F
Density: 4.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534

1/2" Wall Thick.
ID	For Pipe Size	Flexibility	Tube Style	R Value		Each
Buna-N/PVC Foam
2 3/8"	2	Flexible	Slit	2	000000000	00000
3/4" Wall Thick.
Buna-N/PVC Foam
2 3/8"	2	Flexible	Slit	3	000000000	00000
1" Wall Thick.
Buna-N/PVC Foam
2 3/8"	2	Flexible	Slit	4	000000000	00000

White Acrylic Coating (1-qt. Can)	00000000	Each	000000
Contact Adhesive (16-fl. oz. Brush-Top Can)	00000000	Each	00000

Economical Flexible Polyethylene Foam Pipe Insulation

Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.

Slit tubes have an adhesive strip closure.

For technical drawings and 3-D models, click on a part number.

Unslit Tubes

Unslit Tube

Temperature Range: 0° to 180° F
Heat Flow Rate: 0.270 Btu @ 75° F
Density: 1.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM E84 25/50 for Flame and Smoke

3/8" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each
2 3/8"	2	6	Flexible	1.4	00000000	00000
1/2" Wall Thick.
2 3/8"	2	6	Flexible	2	00000000	00000
3/4" Wall Thick.
2 3/8"	2	6	Flexible	3	00000000	00000

Contact Adhesive (16-fl. oz. Brush-Top Can)	00000000	Each	000000
White Acrylic Coating (1-qt. Can)	00000000	Each	00000

Slit Tubes

Slit Tube

Temperature Range: -295° to 200° F
Heat Flow Rate: 0.270 Btu @ 75° F
Density: 1.5 lbs./cu. ft.
Color: See table
Specifications Met: See table

3/8" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	Specifications Met	R Value		Each
Black
2 3/8"	2	6	Flexible	ASTM E84 25/50 for Flame and Smoke, ASTM C1427 Type I	1.4	000000000	000000
1/2" Wall Thick.
Black
2 3/8"	2	6	Flexible	ASTM E84 25/50 for Flame and Smoke, ASTM C1427 Type I	2	000000000	00000
White
2 3/8"	2	6	Flexible	ASTM E84 25/50 for Flame and Smoke, ASTM C1427 Type I	2	000000000	00000
3/4" Wall Thick.
Black
2 3/8"	2	6	Flexible	ASTM E84 25/50 for Flame and Smoke, ASTM C1427 Type I	3	000000000	00000

Contact Adhesive (16-fl. oz. Brush-Top Can)	00000000	Each	000000
White Acrylic Coating (1-qt. Can)	00000000	Each	00000

Mineral Wool Pipe Insulation

These insulation tubes and sheets meet ASTM E84 standards for flame and smoke. They are typically used in process piping and mechanical systems and perform best at temperatures up to 600° F. To use outdoors, add metal jacketing.

For technical drawings and 3-D models, click on a part number.

Tubes

Temperature Range: 0° to 1200° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 8 lbs./cu. ft.
Color: Yellow
Specifications Met: See table

1" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	Specifications Met	R Value		Each
2 3/8"	2	3 1/4	Rigid	ASTM E84 0/0 for Flame and Smoke, ASTM C547	4.3	00000000	000000
1 1/2" Wall Thick.
2 3/8"	2	3 1/4	Rigid	ASTM E84 0/0 for Flame and Smoke, ASTM C547	6.5	00000000	00000
2" Wall Thick.
2 3/8"	2	3 1/4	Rigid	ASTM E84 0/0 for Flame and Smoke, ASTM C547	8.7	00000000	00000

Fiberglass Pipe Insulation

This common insulation material is typically used on hot and cold water lines and in process piping. To use outdoors, add metal jacketing.

Tubes, elbows, and tees are formed to provide the best fit on pipe and are the easiest to install. If your pipe is larger than the sizes we offer, choose a sheet/strip.

Tubes have an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal with reinforced insulation tape (sold separately).

Elbows and tees with PVC jacketing seal using reinforced HVAC tape (sold separately).

For technical drawings and 3-D models, click on a part number.

Tubes with Kraft Paper Jacketing

Tube

Temperature Range: 0° to 850° F
Jacket Temperature Range: -20° to 150° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 4.5 lbs./cu. ft.
Color: Yellow
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C547, ASTM C585

1/2" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each
2 3/8"	2	3	Rigid	2.2	0000000	00000
1" Wall Thick.
2 3/8"	2	3	Rigid	4.3	0000000	00000
1 1/2" Wall Thick.
2 3/8"	2	3	Rigid	6.5	0000000	00000
2" Wall Thick.
2 3/8"	2	3	Rigid	8.7	0000000	00000
3" Wall Thick.
2 3/8"	2	3	Rigid	13	00000000	00000

Reinforced Insulation Tape (3" × 30 ft.)

00000000

Each

000000

90° Elbows

Elbow

Temperature Range: 0° to 1000° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 5 lbs./cu. ft.
Color: Brown
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585

1" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
2 3/8"	2	Rigid	4.3	00000000	000000
1 1/2" Wall Thick.
2 3/8"	2	Rigid	6.5	00000000	00000
2" Wall Thick.
2 3/8"	2	Rigid	8.7	00000000	00000

90° Elbows with PVC Plastic Jacketing

Elbow

Temperature Range: 0° to 1000° F
Jacket Temperature Range: 0° to 150° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 6 lbs./cu. ft.
Color: Red
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke

			1" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
2 3/8"	2	Rigid	4.3	00000000	000000

Reinforced HVAC Tape (3" × 30 ft.)

00000000

Each

000000

Tees

Tee

Temperature Range: 0° to 1000° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 5 lbs./cu. ft.
Color: Brown
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585

1" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
2 3/8"	2	Rigid	4.3	00000000	000000
1 1/2" Wall Thick.
2 3/8"	2	Rigid	6.5	00000000	00000
2" Wall Thick.
2 3/8"	2	Rigid	8.7	00000000	00000

Tees with PVC Plastic Jacketing

Tee

Temperature Range: 0° to 1000° F
Jacket Temperature Range: 0° to 150° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 6 lbs./cu. ft.
Color: Red
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke

			1" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
2 3/8"	2	Rigid	4.3	00000000	000000

Foil, Paper

00000000

Each

000000

Lightweight Melamine Foam Pipe Insulation

Temperature Range: -40° to 350° F
Jacket Temperature Range: -40° to 240° F
Heat Flow Rate: 0.27 Btu @ 75° F
Density: 0.44 lbs./cu. ft.
Color: Gray
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke

Melamine has a lightweight construction that allows quick and easy installation. Use on cold and hot water piping and with refrigeration systems. Insulation has an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal seams with silicone sealant and join lengths with tape (both sold separately).

				1/2" Wall Thick.			1" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each	R Value		Each
Tubes with Kraft Paper Jacketing
2 3/8"	2	4	Rigid	3	000000000	000000	7.4	00000000	000000

Silicone Sealant (10.1-fl. oz. Cartridge)	0000000	Each	000000
Tape (2" × 108 ft.)	00000000	Each	00000

Clean Room Melamine Foam Pipe Insulation

Temperature Range: -40° to 350° F
Jacket Temperature Range: 0° to 140° F
Heat Flow Rate: 0.25 Btu @ 75° F
Density: 0.44 lbs./cu. ft.
Color: Gray
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems. The jacket has an adhesive strip closure. Seal seams with a silicone sealant and join lengths with tape (both sold separately).

For technical drawings and 3-D models, click on a part number.

					1" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	Environmental Rating	R Value		Each
Tubes with PVC Plastic Jacketing
2 3/8"	2	4	Rigid	Fed. Std. Class 100, ISO Class 5	7.4	00000000	000000

Silicone Sealant (10.1-fl. oz. Cartridge)	0000000	Each	000000
Tape (2" × 108 ft.)	00000000	Each	00000

Quick-Install Fiberglass Pipe Insulation

Hook-and-loop fasteners make it easy to install, remove, and reuse this flexible insulation. Use on steam, hot water, and process pipes and fittings.

For technical drawings and 3-D models, click on a part number.

Tubes

Tube

Temperature Range: -50° to 500° F
Heat Flow Rate: 0.24 Btu @ 75° F
Density: 10.5 lbs./cu. ft.
Color: Gray
Specifications Met: ASTM E84 0/0 for Flame and Smoke

				3/8" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each
2 3/8"	2	25	Flexible	1.7	00000000	0000000

Tees

Tee

Temperature Range: -50° to 500° F
Heat Flow Rate: 0.24 Btu @ 75° F
Density: 10.5 lbs./cu. ft.
Color: Gray
Specifications Met: ASTM E84 0/0 for Flame and Smoke

			3/8" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
2 3/8"	2	Flexible	1.7	000000000	000000

45° Elbows

45° Elbow

Temperature Range: -50° to 500° F
Heat Flow Rate: 0.24 Btu @ 75° F
Density: 10.5 lbs./cu. ft.
Color: Gray
Specifications Met: ASTM E84 0/0 for Flame and Smoke

			3/8" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
2 3/8"	2	Flexible	1.7	000000000	000000

90° Elbows

90° Elbow

Temperature Range: -50° to 500° F
Heat Flow Rate: 0.24 Btu @ 75° F
Density: 10.5 lbs./cu. ft.
Color: Gray
Specifications Met: ASTM E84 0/0 for Flame and Smoke

			3/8" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
2 3/8"	2	Flexible	1.7	000000000	000000

Unions

Union

Temperature Range: -50° to 500° F
Heat Flow Rate: 0.24 Btu @ 75° F
Density: 10.5 lbs./cu. ft.
Color: Gray
Specifications Met: ASTM E84 0/0 for Flame and Smoke

			3/8" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
2 3/8"	2	Flexible	1.7	000000000	000000

Chemical-Resistant Cellular Glass Pipe Insulation

Very rigid with a 0% water absorption rate, this insulation is unaffected by corrosive environments, organic solvents, and most acids. It is typically used in chemical-processing systems and underground lines. Insulation is flame resistant, meeting ASTM E84 0/0 for flame and smoke. Seal with tape (sold separately). Outdoor and underground use require metal jacketing (sold separately).

Tubes have a kraft paper jacket with an adhesive strip for sealing.

For technical drawings and 3-D models, click on a part number.

Tubes with Kraft Paper Jacketing

Tube

Temperature Range: -450° to 900° F
Jacket Temperature Range: -40° to 240° F
Heat Flow Rate: 0.29 Btu @ 75° F
Density: 7.5 lbs./cu. ft.
Color: Black
Jacket Color: White
Specifications Met: ASTM C522 Grade 6, ASTM E84 0/0 for Flame and Smoke

				1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each	R Value		Each
2 3/8"	2	2	Rigid	3.4	0000000	000000	6.9	0000000	000000

Underground Jacketing (24" × 5 ft.)	000000000	Each	000000
Joint Sealing Tape (4" × 10 ft.)	000000000	Each	00000

90° Elbows

Elbow

Temperature Range: -450° to 900° F
Heat Flow Rate: 0.29 Btu @ 75° F
Density: 7.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM C522 Grade 6, ASTM E84 0/0 for Flame and Smoke

				1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Flexibility	Choose a Pipe Fitting Connection Type	R Value		Each	R Value		Each
2 3/8"	2	Rigid	Socket Weld, Threaded	3.4	0000000	000000	6.9	00000000	000000

Underground Jacketing (24" × 5 ft.)	000000000	Each	000000
Joint Sealing Tape (4" × 10 ft.)	000000000	Each	00000

Tees

Tee

Temperature Range: -450° to 900° F
Heat Flow Rate: 0.29 Btu @ 75° F
Density: 7.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM C522 Grade 6, ASTM E84 0/0 for Flame and Smoke

				1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Flexibility	Choose a Pipe Fitting Connection Type	R Value		Each	R Value		Each
2 3/8"	2	Rigid	Socket Weld, Threaded	3.4	00000000	000000	__	000000	00
2 3/8"	2	Rigid	Threaded	__	000000	00	6.9	00000000	0000000

Underground Jacketing (24" × 5 ft.)	000000000	Each	000000
Joint Sealing Tape (4" × 10 ft.)	000000000	Each	00000

Ultra-Insulating Low-Temperature Polyisocyanurate Foam Pipe Insulation

This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F. To use outdoors, add metal jacketing.

Tubes have a kraft paper all-service jacket (ASJ) that resists mold and mildew by allowing moisture to evaporate. They have an adhesive strip closure.

For technical drawings and 3-D models, click on a part number.

Tubes with Kraft Paper Jacketing

Tube

Temperature Range: -295° to 300° F
Jacket Temperature Range: -40° to 240° F
Heat Flow Rate: 0.17 Btu @ 75° F
Density: 2 lbs./cu. ft.
Color: Green
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke

				1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each	R Value		Each
2 3/8"	2	3	Rigid	5.9	0000000	000000	11.8	00000000	000000

90° Elbows

Elbow

Temperature Range: -295° to 300° F
Heat Flow Rate: 0.17 Btu @ 75° F
Density: 2 lbs./cu. ft.
Color: Green
Specifications Met: ASTM E84 25/50 for Flame and Smoke

			1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each	R Value		Each
2 3/8"	2	Rigid	5.9	0000000	000000	11.8	00000000	000000

Tees

Tee

Temperature Range: -295° to 300° F
Heat Flow Rate: 0.17 Btu @ 75° F
Density: 2 lbs./cu. ft.
Color: Green
Specifications Met: ASTM E84 25/50 for Flame and Smoke

			1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each	R Value		Each
2 3/8"	2	Rigid	5.9	0000000	000000	11.8	00000000	000000