About Plastic and Rubber Tubing
More
About Metal Tubing
More
About Hose
More
Crack-Resistant Firm Plastic Tubing for Food and Beverage
This tubing offers superior impact and crack resistance—even at low temperatures. Made of FDA listed materials, it is suitable for use with food and beverage. It is made without plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through it. Tubing is semi-flexible, so it is good for gradual bends.
Polyethylene tubing can withstand lower temperatures and higher pressures than EVA tubing.
Semi-clear tubing gives you a limited view inside the line.
For technical drawings and 3-D models, click on a part number.
Smooth-Bore Seamless Stainless Steel Tubing
316 stainless steel offers excellent corrosion resistance.
Tubing that meets ASTM specifications adheres to international standards for dimensions and materials.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -325° to 1500° F
- Bending Method: Tube Bender
- For Use With: Hydraulic Fluid, Oil, Water, Natural Gas, Air
- Compatible Tubing Fittings: see table
Air Hose
Attach barbed fittings to this hose for use in low-pressure air applications. Hose has a smooth interior for unrestricted flow. It is reinforced with yarn for good strength. It won’t degrade when exposed to ozone or UV light.
Buna-N rubber hose has good abrasion and tear resistance.
For technical drawings and 3-D models, click on a part number.
Medium-Pressure Chemical Hose
Yarn reinforcement gives this hose good strength under pressure.
Buna-N hose has a slightly wider temperature range than nylon hose. Use it with diesel fuel, gasoline, and mineral spirits.
For technical drawings and 3-D models, click on a part number.
Polished Multipurpose 304 Stainless Steel
Polished to either a brushed or mirror-like finish, this material is widely used to fabricate decorative enclosures and industrial workstations. The sheets, strips, bars, and adhesive-back foil are covered with a protective peel-off film. 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Brushed #4 is often called a satin finish; it’s similar to a #3 finish, except the grain lines are finer. Rectangular and round tubes are polished on the outside.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength:
Inch Sizes: Not Rated
Metric Sizes: 24,000 psi - Hardness:
Inch Sizes: Rockwell B80 (Medium)
Metric Sizes: Rockwell B70 (Medium) - Heat Treatment: See table
- Heat Treatable: No
- Specifications Met:
Inch Sizes: ASTM A554
Metric Sizes: ASTM A269
Ultra-High-Temperature Quartz Glass Tubes
- Color: Clear
- Max. Temperature: 2000° F
- Fabrication: Annealed
Blistering temperatures won’t melt these quartz tubes, and rapid temperature shifts won’t cause them to crack. Even tougher than borosilicate, they can be used in furnaces and ovens heated up to 2000° F. These highly pure tubes are often used in laboratories because they won’t leach impurities into samples or contaminate chemical reactions. Quartz tubes are optically clear and have excellent UV transmission, making them ideal for UV purification systems.
For technical drawings and 3-D models, click on a part number.
12" Lg. | |||||
|---|---|---|---|---|---|
| OD | ID | Wall Thick. | Edge Fabrication | Each | |
Metric | |||||
| 15mm | 13.000mm | 1mm | Ground | 0000000 | 00000 |