12" Tubing | McMaster-Carr

Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.

Flexible Duct Hose with Wear
Strip for Corrosive Fumes

Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.

Extreme-Temperature Flexible Duct
Hose with Wear Strip for Fumes

Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.

Flexible Duct Hose for Corrosive Fumes

A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.

Duct Hose and Fittings for Dust

Blo-R-Vac Flexible Duct Hose for Dust

A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.

High-Temperature Flexible Duct Hose for Dust

The neoprene coating on this hose holds up under high heat.

Flexible Duct Hose for Clean Environments

This white hose makes dirt and other contaminants easy to spot.

Blo-R-Vac Flexible Duct
Hose with Wear Strip for Dust

This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.

Flame-Resistant Flexible Duct
Hose with Wear Strip for Dust

In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.

Abrasion-Resistant Very Flexible Duct Hose for Dust

A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).

Very Flexible Duct Hose for Dust

The small bend radius makes this hose easy to wrap around corners and install in tight spaces.

Static-Control Very Flexible Duct Hose for Dust

The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.

Duct Hose and Fittings for Chips and Shavings

Blo-R-Vac Duct Hose for
Wood Chips and Plastic Pellets

A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.

Continuous-Flex Duct Hose for
Wood Chips and Plastic Pellets

The neoprene coating on this hose withstands continuous motion without weakening.

Flame-Resistant Duct Hose for
Wood Chips and Plastic Pellets

Hose meets UL 94 V-2 for flame retardance.

Abrasion-Resistant Duct Hose with Wear
Strip for Wood Chips and Plastic Pellets

Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.

Bend-and-Stay Metal Duct Hose
for Wood Chips and Plastic Pellets

Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.

Super-Abrasion-Resistant Metal Duct
Hose for Metal Chips and Shavings

Formed by metal interlocked strips, this hose has the strength to stand up to sharp, abrasive materials.

Puncture- and Abrasion-Resistant Duct
Hose for Metal Chips and Shavings

Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).

Static-Control Duct Hose for
Metal Chips and Shavings

SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.

Antistatic Duct Hose for Dry Food

Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.

Duct Hose and Fittings for Air

Bend-and-Stay Metal Duct Hose for Air

Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.

Insulated Duct Hose for Indoor Air

Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.

Insulated Bend-and-Stay Metal Duct Hose for Air

Bend this hose into position in heating and cooling applications where it’s important to maintain the temperature of the air inside the hose.

Insulated Blo-N-Vent Duct
Hose with Wear Strip for Air

A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.

Quick-Attach Duct Hose with Wear Strip for Air

The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.

High-Temperature Duct Hose with Wear Strip for Air

An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.

Blo-N-Vent Duct Hose for Air

Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.

Blo-N-Vent Duct Hose with Wear Strip for Air

A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.

Easy-Store Duct Hose for Air

The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.

High-Temperature Chimney Vents and Fittings

Built to withstand temperatures up to 1000° F, these vent pipes and fittings are for use with boilers, furnaces, stoves, and other equipment that is fired by coal, gas, oil, propane, or wood.

About Duct Hose

Plastic and Rubber Tubing for Flow

Large-Diameter Soft Rubber Tubing for Chemicals

Large-Diameter Soft RubberTubing for Food and Beverage

Vibration-Resistant Water Hose with Flanges

Vibration-Resistant Water Hose with Flanges

Duct Hose and Fittings for Fumes

High-Temperature Rigid Metal Duct Hose for Fumes

Bend-and-Stay Very FlexibleMetal Duct Hose for Fumes

Blo-R-Vac Very Flexible Duct Hose for Fumes

Easy-Store Very Flexible Duct Hose for Fumes

Retracting Very Flexible DuctHose with Wear Strip for Fumes

Economical Very Flexible Duct Hose for Fumes

High-Temperature Flexible Duct Hose for Fumes

Flexible Duct Hose with WearStrip for Corrosive Fumes

Extreme-Temperature Flexible DuctHose with Wear Strip for Fumes

Flexible Duct Hose for Corrosive Fumes

Duct Hose and Fittings for Dust

Blo-R-Vac Flexible Duct Hose for Dust

High-Temperature Flexible Duct Hose for Dust

Flexible Duct Hose for Clean Environments

Blo-R-Vac Flexible DuctHose with Wear Strip for Dust

Flame-Resistant Flexible DuctHose with Wear Strip for Dust

Abrasion-Resistant Very Flexible Duct Hose for Dust

Very Flexible Duct Hose for Dust

Static-Control Very Flexible Duct Hose for Dust

Duct Hose and Fittings for Chips and Shavings

Blo-R-Vac Duct Hose forWood Chips and Plastic Pellets

Continuous-Flex Duct Hose forWood Chips and Plastic Pellets

Flame-Resistant Duct Hose forWood Chips and Plastic Pellets

Abrasion-Resistant Duct Hose with WearStrip for Wood Chips and Plastic Pellets

Bend-and-Stay Metal Duct Hosefor Wood Chips and Plastic Pellets

Super-Abrasion-Resistant Metal DuctHose for Metal Chips and Shavings

Puncture- and Abrasion-Resistant DuctHose for Metal Chips and Shavings

Static-Control Duct Hose forMetal Chips and Shavings

Antistatic Duct Hose for Dry Food

Duct Hose and Fittings for Air

Bend-and-Stay Metal Duct Hose for Air

Insulated Duct Hose for Indoor Air

Insulated Bend-and-Stay Metal Duct Hose for Air

Insulated Blo-N-Vent DuctHose with Wear Strip for Air

Quick-Attach Duct Hose with Wear Strip for Air

High-Temperature Duct Hose with Wear Strip for Air

Blo-N-Vent Duct Hose for Air

Blo-N-Vent Duct Hose with Wear Strip for Air

Easy-Store Duct Hose for Air

High-Temperature Chimney Vents and Fittings

High-Temperature Chimney Vents and Fittings

Large-Diameter Soft Rubber
Tubing for Food and Beverage

Bend-and-Stay Very Flexible
Metal Duct Hose for Fumes

Retracting Very Flexible Duct
Hose with Wear Strip for Fumes

Flexible Duct Hose with Wear
Strip for Corrosive Fumes

Extreme-Temperature Flexible Duct
Hose with Wear Strip for Fumes

Blo-R-Vac Flexible Duct
Hose with Wear Strip for Dust

Flame-Resistant Flexible Duct
Hose with Wear Strip for Dust

Blo-R-Vac Duct Hose for
Wood Chips and Plastic Pellets

Continuous-Flex Duct Hose for
Wood Chips and Plastic Pellets

Flame-Resistant Duct Hose for
Wood Chips and Plastic Pellets

Abrasion-Resistant Duct Hose with Wear
Strip for Wood Chips and Plastic Pellets

Bend-and-Stay Metal Duct Hose
for Wood Chips and Plastic Pellets

Super-Abrasion-Resistant Metal Duct
Hose for Metal Chips and Shavings

Puncture- and Abrasion-Resistant Duct
Hose for Metal Chips and Shavings

Static-Control Duct Hose for
Metal Chips and Shavings

Insulated Blo-N-Vent Duct
Hose with Wear Strip for Air