An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

With a diameter of 2" or larger, this tubing has the girth to handle high-volume beverage and bulk food processing applications.

Lighter than other plastic and rubber tubing, but extremely tough, this tubing stands up to the wear and tear of daily use.

Move high volumes of dry bulk food, powders, and pellets around your food processing plant while reducing the risk of contaminating the food.

This tubing offers superior impact and crack resistance—even at low temperatures.

Made from TPE plastic, this tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through.

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.

Not only is this tubing cured with platinum and free of plasticizers like DEHP, it can handle higher temperatures than any of our other high-purity soft tubing. Use in applications up to 450° F.

The outside of this tubing is polished to a high-luster finish for a shiny appearance.

This premium-grade tubing is polished to a 20 Ra or 15 Ra finish on the inside to reduce particle buildup and allow for easy cleaning.

Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage.

Made of FDA listed materials, these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Also known as instant fittings, these connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Made of PVDF (also known as Kynar), these fittings have excellent strength and can handle temperatures as high as 240° F or 270° F.

Use these nuts with high-temperature compression fittings for food and beverage to create a seal on plastic tubing.

Tube supports slip inside tubing to prevent the walls from collapsing.

Connect tubing in sanitary food processing areas with frequent washdowns. They have a single sleeve (ferrule) that bites into hard metal and plastic tubing to make a seal—no heating, flaring, or soldering tools required.

Use these clamps with quick-clamp fittings for dairy to quickly connect and disconnect your line as needed.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Polished to a 20 Ra finish, these fittings have an extra-smooth interior that prevents product buildup and inhibits bacteria growth.

These fittings are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. Secure barbed ends into plastic or rubber hose with a clamp.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.

Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.

These short lengths of hose have a collar on each end to prevent the clamp from slipping off. FDA compliant for direct contact with food, they’re often used to move rice and grain.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

PETG can be formed into complex shapes without sacrificing durability.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.