We will reply to your message within an hour.
An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.
The industry standard for general purpose food, beverage, and dairy applications, this tubing meets NSF/ANSI Standard 51 for food contact.
Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.
Silver ions are blended into the walls of this tubing to inhibit the growth of odor-causing microbes.
Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.
With a diameter of 2" or larger, this tubing has the girth to handle high-volume beverage and bulk food processing applications.
Hot food and beverage applications won’t harm this tubing—it can handle temperatures up to 390° F.
The smooth, nonabsorbing interior on this tubing resists material buildup, so it is easy to clean.
Lighter than other plastic and rubber tubing, but extremely tough, this tubing stands up to the wear and tear of daily use.
Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.
This tubing offers superior impact and crack resistance—even at low temperatures.
Tough and durable, this tubing resists abrasion and tearing.
Made from TPE plastic, this tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through.
Sized for vibrating sifters, screeners, hoppers, and packaging equipment, this tubing has a diameter of 4" or larger to handle a variety of bulk food processing applications.
This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.
Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.
Strong, yet pliable, this tubing is good for gradual bends and can handle repeated flexing.
This durable tubing won’t crack under stress—even when temperatures drop below freezing.
Not only is this tubing cured with platinum and free of plasticizers like DEHP, it can handle higher temperatures than any of our other high-purity soft tubing. Use in applications up to 450° F.
With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.
Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it.
The outside of this tubing is polished to a high-luster finish for a shiny appearance.
The interior and exterior are polished to a high-luster finish to resist particle buildup and allow for easy cleaning.
This premium-grade tubing is polished to a 20 Ra or 15 Ra finish on the inside to reduce particle buildup and allow for easy cleaning.
Take samples in sanitary environments—these tube fittings won’t contaminate your lines or force you to pause them.
Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage.
Fittings withstand temperatures up to 220° F.
A smooth interior reduces friction and prevents product buildup, ensuring an unrestricted flow.
Made of FDA listed materials, these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.
Also known as instant fittings, these connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.
Made of brass, these fittings withstand frequent washdowns in food-processing applications. They also adhere to NSF/ANSI safety standards, so they’re safe to use with food, beverages, and dairy.
Create corrosion-resistant connections in food and beverage lines with just a push. Also known as instant fittings, these fittings have an internal gripping ring and an O-ring that hold tight to tubing.
Connect hot food and beverage lines with just a push. Also known as instant fittings, they have an internal gripping ring and an O-ring that hold tight to tubing.
Made of PVDF (also known as Kynar), these fittings have excellent strength and can handle temperatures as high as 240° F or 270° F.
Tube supports slip inside tubing to prevent the walls from collapsing.
Use these nuts with high-temperature compression fittings for food and beverage to create a seal on plastic tubing.
These plastic compression fittings meet NSF/ANSI Standard 51 for food contact.
Use these nuts and sleeves with compression fittings for food and beverage to create a seal on plastic tubing.
Connect tubing in sanitary food processing areas with frequent washdowns. They have a single sleeve (ferrule) that bites into hard metal and plastic tubing to make a seal—no heating, flaring, or soldering tools required.
These quick-disconnect couplings meet NSF/ANSI 169 for food equipment.
Use these clamps with quick-clamp fittings for dairy to quickly connect and disconnect your line as needed.
Fittings have a barb that grips onto tubing. Use in applications up to 150 psi.
The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.
Polished to a 20 Ra finish, these fittings have an extra-smooth interior that prevents product buildup and inhibits bacteria growth.
Connect stainless steel tubing on one end and plastic tubing on the other end.
Add a push-to-connect junction to unthreaded ports for easy connections with tubing. To install, drill a stepped hole in your surface, push the fitting components into place, and insert your tubing.
Transport milk, syrup, meat, and other wet food and beverages through your line.
Move milk, syrup, meat, and other wet-food and drink products through lines connected by cam-and-groove fittings.
Made of platinum-cured silicone, this hose stays strong and flexible across a wide temperature range. Use it with juice, meat, milk, poultry, and syrup.
An EPDM cover guards this hose, so it won't tear if scraped or break down from ozone or UV light. Use it to move milk, syrup, meat, and other wet and food and beverages.
With a tough EPDM cover, this hose won’t wear down from rubbing or scraping, crack from ozone, or degrade from UV light. It has flanged ends that join with quick-clamp fittings, so you can easily access lines that carry milk, syrup, meat, and other wet food and drinks.
Blended with Buna-N, this hose remains flexible and won’t break down from oily or fatty food and beverages.
For easy access to lines that handle oily and fatty foods and beverages, this hose has flanged ends that join with quick-clamp fittings.
Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed.
Transport wet food and drink at high pressures with a hose connected by sanitary fittings.
Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.
Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed. Its fittings easily detach, giving you quick access to your line.
Easily access lines that move highly alcoholic or acidic wet food and beverages—this hose has flanged ends that join with quick-clamp fittings.
Suction, transfer, and dispense wet food and beverages with up to 99% alcohol concentrations.
These fittings are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. Secure barbed ends into plastic or rubber hose with a clamp.
To stand up to the harsh chemicals used to clean food-processing lines, these fittings are made of PVDF, also known as Kynar.
Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.
Couplings are compatible with quick-disconnect Plastic-shape plugs and sockets. They are designed for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 100 psi.
These couplings are compatible with International Standard ISO Series B-shape plugs and sockets. They are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 220 psi.
Connect to barbed plastic pipe fittings with a clamp. Pipe isn't as bendable as soft tubing, but can still bend around objects, resulting in fewer connection points in your line. Fewer connection points not only shortens installation time, but also allows for smoother flow through the line.
These short lengths of hose have a collar on each end to prevent the clamp from slipping off. FDA compliant for direct contact with food, they’re often used to move rice and grain.
Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.
PETG can be formed into complex shapes without sacrificing durability.
Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.
Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.
This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.
Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food.
Made of FDA-listed materials, these sights can be used with food and beverage. They have sanitary quick-clamp connections for easy disassembly and cleaning.