Ultra-Strength Carbon Steel (AHSS) Round Tubes
- Yield Strength: 100,000 psi
- Hardness: Rockwell C26 (Hard)
- Heat Treatable: No
The same steel used in automobile bodies, this AHSS (advanced high-strength steel) allows you to fabricate high-strength parts using thinner material than you could with other types of steel. It is formable, weldable, and more economical than alloy steel. It's sometimes called HSLA (high-strength low-alloy) steel.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Hard Wear-Resistant 52100 Alloy Steel Tubes
- Yield Strength: See table
- Hardness: See table
- Heat Treatable: Yes
- Maximum Hardness After Heat Treatment: Rockwell C60
- Specifications Met: ASTM A295
Easier to machine than 52100 alloy steel rods, these extremely hard and wear-resistant tubes are often used to create bearings, bushings, and other cylindrical parts that are under constant stress. They’re also known as chrome steel.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| OD | OD Tolerance | ID | ID Tolerance | Yield Strength, psi  | Hardness | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.245" Wall Thickness (-0.0123" to 0.0123" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1.207" | -0.005" to 0.005" | 0.717" | -0.01" to 0.01" | 140,000 | Rockwell B100 | 0000000 | |||
0.309" Wall Thickness (-0.02" to 0.02" Tolerance) | |||||||||
| 1.315" | -0.004" to 0.016" | 0.697" | -0.043" to 0.055" | 140,000 | Rockwell B100 | 0000000 | |||
0.353" Wall Thickness (-0.0176" to 0.0176" Tolerance) | |||||||||
| 1.551" | -0.005" to 0.005" | 0.846" | -0.01" to 0.01" | 140,000 | Rockwell B100 | 0000000 | |||
0.382" Wall Thickness (-0.0191" to 0.0191" Tolerance) | |||||||||
| 2.071" | -0.006" to 0.006" | 1.253" | -0.01" to 0.01" | 140,000 | Rockwell B100 | 0000000 | |||
Easy-to-Form Marine-Grade 5086 Aluminum Tubes
- Yield Strength: 28,000 psi
- Hardness: Not Rated
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B210
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wall Thick. | Wall Thick. Tolerance | OD | OD Tolerance | ID | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 0.113" | -0.014" to 0.014" | 1.050" | -0.008" to 0.008" | 0.824" | 0.010" per ft. | 0000000 | |||
| 0.133" | -0.017" to 0.017" | 1.315" | -0.008" to 0.008" | 1.049" | 0.010" per ft. | 0000000 | |||
| 0.140" | -0.018" to 0.018" | 1.660" | -0.008" to 0.008" | 1.380" | 0.010" per ft. | 0000000 | |||
| 0.145" | -0.018" to 0.018" | 1.900" | -0.008" to 0.008" | 1.610" | 0.010" per ft. | 0000000 | |||
| 0.154" | -0.019" to 0.019" | 2.375" | -0.008" to 0.008" | 2.067" | 0.010" per ft. | 0000000 | |||
| 0.179" | -0.022" to 0.022" | 1.315" | -0.008" to 0.008" | 0.957" | 0.010" per ft. | 0000000 | |||
| 0.191" | -0.024" to 0.024" | 1.660" | -0.008" to 0.008" | 1.278" | 0.010" per ft. | 0000000 | |||
| 0.200" | -0.025" to 0.025" | 1.900" | -0.008" to 0.008" | 1.500" | 0.010" per ft. | 0000000 | |||
| 0.203" | -0.025" to 0.025" | 2.875" | -0.008" to 0.008" | 2.469" | 0.010" per ft. | 0000000 | |||
| 0.216" | -0.027" to 0.027" | 3.500" | -0.008" to 0.008" | 3.068" | 0.010" per ft. | 0000000 | |||
| 0.218" | -0.027" to 0.027" | 2.375" | -0.008" to 0.008" | 1.939" | 0.010" per ft. | 0000000 | |||
| 0.276" | -0.034" to 0.034" | 2.875" | -0.008" to 0.008" | 2.323" | 0.010" per ft. | 0000000 | |||
| 0.300" | -0.037" to 0.037" | 3.500" | -0.008" to 0.008" | 2.900" | 0.010" per ft. | 0000000 |
Ultra-Formable 260 Brass Round Tubes
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
Tubes with 0.014" and 0.45 mm wall thicknesses allow you to create telescoping tubes; each tube fits inside the next larger size.
- Yield Strength: Not Rated
- Hardness:
0.014" wall thick.: Not Rated
All other sizes: Rockwell B55 (Soft) - Temper:
0.014" wall thick.: H02 (1/2 Hard) to H03 (3/4 Hard)
All other sizes: H58 - Heat Treatable: No
- Specifications Met: ASTM B135
1 ft. Lg. | 3 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|---|
| OD | OD Tolerance Range | ID | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
0.014" Wall Thick. (-0.001" to 0.001" Tolerance) | ||||||||
| 1/16" | -0.002" to 0.002" | 0.035" | 3 | 00000000 | 00000 | 5 | 00000000 | 000000 |
| 3/32" | -0.002" to 0.002" | 0.066" | 3 | 0000000 | 0000 | 5 | 00000000 | 00000 |
| 1/8" | -0.002" to 0.002" | 0.097" | 1 | 0000000 | 0000 | 5 | 00000000 | 00000 |
| 5/32" | -0.002" to 0.002" | 0.128" | 1 | 0000000 | 0000 | 5 | 00000000 | 00000 |
| 3/16" | -0.002" to 0.002" | 0.16" | 1 | 0000000 | 0000 | 6 | 00000000 | 00000 |
| 7/32" | -0.002" to 0.002" | 0.191" | 1 | 0000000 | 0000 | 6 | 00000000 | 00000 |
| 1/4" | -0.002" to 0.002" | 0.222" | 1 | 0000000 | 0000 | 5 | 00000000 | 00000 |
| 9/32" | -0.002" to 0.002" | 0.253" | 1 | 0000000 | 0000 | 5 | 00000000 | 00000 |
| 5/16" | -0.002" to 0.002" | 0.285" | 1 | 0000000 | 0000 | 4 | 00000000 | 00000 |
| 11/32" | -0.002" to 0.002" | 0.316" | 1 | 0000000 | 0000 | 1 | 00000000 | 0000 |
| 3/8" | -0.002" to 0.002" | 0.347" | 1 | 0000000 | 0000 | 3 | 00000000 | 00000 |
| 13/32" | -0.002" to 0.002" | 0.378" | 1 | 0000000 | 0000 | 1 | 00000000 | 0000 |
| 7/16" | -0.002" to 0.002" | 0.41" | 1 | 0000000 | 0000 | 1 | 00000000 | 00000 |
| 15/32" | -0.002" to 0.002" | 0.441" | 1 | 0000000 | 0000 | 1 | 00000000 | 00000 |
| 1/2" | -0.002" to 0.002" | 0.472" | 1 | 0000000 | 0000 | 1 | 00000000 | 00000 |
| 17/32" | -0.002" to 0.002" | 0.503" | 1 | 0000000 | 0000 | 1 | 00000000 | 00000 |
| 9/16" | -0.002" to 0.002" | 0.535" | 1 | 0000000 | 0000 | 1 | 00000000 | 00000 |
| 19/32" | -0.002" to 0.002" | 0.566" | 1 | 0000000 | 0000 | 1 | 00000000 | 00000 |
| 5/8" | -0.002" to 0.002" | 0.597" | 1 | 0000000 | 0000 | 1 | 00000000 | 00000 |
| 21/32" | -0.002" to 0.002" | 0.628" | 1 | 0000000 | 0000 | 1 | 00000000 | 00000 |
| Each | Each | |||||||
0.032" Wall Thick. (-0.004" to 0.004" Tolerance) | ||||||||
| 3/16" | -0.004" to 0.004" | 0.124" | __ | 00000000 | 0000 | __ | 00000000 | 00000 |
| 1/4" | -0.004" to 0.004" | 0.186" | __ | 00000000 | 0000 | __ | 00000000 | 00000 |
| 5/16" | -0.004" to 0.004" | 0.249" | __ | 00000000 | 0000 | __ | 00000000 | 00000 |
| 3/8" | -0.004" to 0.004" | 0.311" | __ | 00000000 | 0000 | __ | 00000000 | 00000 |
| 1/2" | -0.004" to 0.004" | 0.436" | __ | 00000000 | 0000 | __ | 00000000 | 00000 |
| 1 3/8" | -0.004" to 0.004" | 1.311" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 2 1/4" | -0.004" to 0.004" | 2.186" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
0.049" Wall Thick. (-0.004" to 0.004" Tolerance) | ||||||||
| 3/16" | -0.004" to 0.004" | 0.09" | __ | 00000000 | 0000 | __ | 00000000 | 00000 |
| 1/4" | -0.004" to 0.004" | 0.152" | __ | 00000000 | 0000 | __ | 00000000 | 00000 |
| 5/16" | -0.004" to 0.004" | 0.215" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 3/8" | -0.004" to 0.004" | 0.277" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 5/8" | -0.004" to 0.004" | 0.527" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 3/4" | -0.004" to 0.004" | 0.652" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 7/8" | -0.004" to 0.004" | 0.777" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
0.065" Wall Thick. (-0.006" to 0.006" Tolerance) | ||||||||
| 1/4" | -0.004" to 0.004" | 0.12" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 5/16" | -0.004" to 0.004" | 0.183" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 3/8" | -0.004" to 0.004" | 0.245" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 7/16" | -0.004" to 0.004" | 0.308" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 1/2" | -0.004" to 0.004" | 0.37" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 5/8" | -0.004" to 0.004" | 0.495" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 3/4" | -0.004" to 0.004" | 0.62" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 7/8" | -0.004" to 0.004" | 0.745" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 1" | -0.004" to 0.004" | 0.87" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 1 1/8" | -0.004" to 0.004" | 0.995" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 1 1/4" | -0.004" to 0.004" | 1.12" | __ | 00000000 | 00000 | __ | 00000000 | 00000 |
| 1 3/8" | -0.004" to 0.004" | 1.245" | __ | 00000000 | 00000 | __ | 00000000 | 000000 |
| 1 1/2" | -0.004" to 0.004" | 1.37" | __ | 00000000 | 00000 | __ | 00000000 | 000000 |
| 1 5/8" | -0.004" to 0.004" | 1.495" | __ | 00000000 | 00000 | __ | 00000000 | 000000 |
| 1 3/4" | -0.004" to 0.004" | 1.62" | __ | 00000000 | 00000 | __ | 00000000 | 000000 |
| 1 7/8" | -0.004" to 0.004" | 1.745" | __ | 00000000 | 00000 | __ | 00000000 | 000000 |
| 2 1/2" | -0.004" to 0.004" | 2.37" | __ | 00000000 | 00000 | __ | 00000000 | 000000 |
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H02 (1/2 Hard) to H03 (3/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B135
300 mm Lg. | |||||
|---|---|---|---|---|---|
| OD, mm | OD Tolerance Range, mm | ID, mm | Pkg. Qty. | Pkg. | |
0.45 mm Wall Thick. (-0.025 to 0.025 mm Tolerance) | |||||
| 2 | -0.051 to 0.051 | 1.1 | 4 | 00000000 | 00000 |
| 3 | -0.051 to 0.051 | 2.1 | 4 | 00000000 | 0000 |
| 4 | -0.051 to 0.051 | 3.1 | 3 | 00000000 | 0000 |
| 5 | -0.051 to 0.051 | 4.1 | 3 | 00000000 | 0000 |
| 6 | -0.051 to 0.051 | 5.1 | 2 | 00000000 | 0000 |
| 7 | -0.051 to 0.051 | 6.1 | 2 | 00000000 | 0000 |
| 8 | -0.051 to 0.051 | 7.1 | 2 | 00000000 | 0000 |
| 9 | -0.051 to 0.051 | 8.1 | 1 | 00000000 | 0000 |
| 10 | -0.051 to 0.051 | 9.1 | 1 | 00000000 | 0000 |
Ultra-Formable 260 Brass Rectangular Tubes
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H02 (1/2 Hard) to H03 (3/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B135
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware. Each tube fits inside the next larger size for creating telescoping tubes.
Outside | Inside | 1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Pkg. Qty. | Pkg. | |
0.014" Wall Thick. (-0.001" to 0.001" Tolerance) | ||||||||
| 1/16" | -0.002" to 0.002" | 1/16" | -0.002" to 0.002" | 0.035" | 0.035" | 2 | 00000000 | 00000 |
| 3/32" | -0.002" to 0.002" | 3/32" | -0.002" to 0.002" | 0.066" | 0.066" | 2 | 00000000 | 0000 |
| 3/32" | -0.002" to 0.002" | 3/16" | -0.002" to 0.002" | 0.066" | 0.16" | 1 | 00000000 | 0000 |
| 1/8" | -0.002" to 0.002" | 1/8" | -0.002" to 0.002" | 0.097" | 0.097" | 1 | 0000000 | 0000 |
| 1/8" | -0.002" to 0.002" | 1/4" | -0.002" to 0.002" | 0.097" | 0.222" | 1 | 00000000 | 0000 |
| 5/32" | -0.002" to 0.002" | 5/32" | -0.002" to 0.002" | 0.128" | 0.128" | 1 | 0000000 | 0000 |
| 5/32" | -0.002" to 0.002" | 5/16" | -0.002" to 0.002" | 0.128" | 0.285" | 1 | 00000000 | 0000 |
| 3/16" | -0.002" to 0.002" | 3/16" | -0.002" to 0.002" | 0.16" | 0.16" | 1 | 0000000 | 0000 |
| 3/16" | -0.002" to 0.002" | 3/8" | -0.002" to 0.002" | 0.16" | 0.347" | 1 | 00000000 | 0000 |
| 7/32" | -0.002" to 0.002" | 7/32" | -0.002" to 0.002" | 0.191" | 0.191" | 1 | 0000000 | 0000 |
| 1/4" | -0.002" to 0.002" | 1/4" | -0.002" to 0.002" | 0.222" | 0.222" | 1 | 0000000 | 0000 |
Ultra-Formable 260 Brass Hex Tubes
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H02 (1/2 Hard) to H03 (3/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B135
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
High-Strength 330 Brass
- Yield Strength: 60,000 psi
- Hardness: Rockwell B75 (Medium)
- Temper: H80 (Full Hard)
- Heat Treatable: No
- Specifications Met: ASTM B135
Offering the highest yield strength of all our brass, 330 has a low lead content for a good balance of machinability and formability. It's used for fire station poles, pump cylinder lines, and plumbing accessories.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| OD | OD Tolerance Range | ID | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||
|---|---|---|---|---|---|---|
| 5/8" | -0.002" to 0.002" | 3/8" | 0000000 | |||
| 3/4" | -0.0025" to 0.0025" | 1/2" | 0000000 | |||
| 7/8" | -0.0025" to 0.0025" | 5/8" | 0000000 | |||
| 1" | -0.003" to 0.003" | 3/4" | 0000000 | |||
| 1 1/4" | -0.003" to 0.003" | 1" | 0000000 | |||
| 1 3/8" | -0.003" to 0.003" | 1 1/8" | 0000000 | |||
| 1 1/2" | -0.003" to 0.003" | 1 1/4" | 0000000 | |||
| 2" | -0.003" to 0.003" | 1 3/4" | 0000000 | |||
| 2 1/2" | -0.004" to 0.004" | 2 1/4" | 0000000 | |||
Super-Conductive 101 Copper Tubes
- Yield Strength: 30,000 psi
- Hardness: Rockwell F90 (Soft)
- Temper: H80 (Full Hard)
- Heat Treatable: No
- Specifications Met: ASTM B75, ASTM F68
With 99.99% copper content, 101 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| OD | OD Tolerance Range | ID | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.032" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 1/8" | -0.003" to 0.003" | 0.061" | Not Rated | 0000000 | |||
| 3/16" | -0.003" to 0.003" | 0.124" | Not Rated | 0000000 | |||
| 3/8" | -0.003" to 0.003" | 0.311" | 0.5" | 0000000 | |||
| 1/2" | -0.003" to 0.003" | 0.436" | 0.5" | 0000000 | |||
| 3/4" | -0.003" to 0.003" | 0.686" | 0.5" | 0000000 | |||
0.035" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||||
| 1/4" | -0.003" to 0.003" | 0.18" | 0.5" | 0000000 | |||
0.065" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||||
| 3/8" | -0.003" to 0.003" | 0.245" | 0.5" | 0000000 | |||
| 1/2" | -0.003" to 0.003" | 0.37" | 0.5" | 0000000 | |||
| 3/4" | -0.003" to 0.003" | 0.62" | 0.5" | 0000000 | |||
1/8" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||||
| 1" | -0.003" to 0.003" | 3/4" | 0.5" | 0000000 | |||
Weldable 122 Copper Tubes
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B251
The addition of phosphorus makes 122 copper easier to weld and braze than 110 copper. It has excellent resistance to corrosion caused by water, soil, and weather, making it the go-to material for plumbing and underground applications. It’s also used for storage tanks and chemical equipment. It's less electrically conductive than other copper. Each tube fits inside the next larger size for creating telescoping tubes.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
1 ft. Lg. | 6 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|
| OD | OD Tolerance Range | ID | Pkg. Qty. | Pkg. | Each | ||
0.014" Wall Thick. (-0.001" to 0.001" Tolerance) | |||||||
| 1/16" | -0.002" to 0.002" | 0.035" | 3 | 0000000 | 00000 | 0000000 | 00000 |
| 3/32" | -0.002" to 0.002" | 0.066" | 3 | 0000000 | 0000 | 0000000 | 0000 |
| 1/8" | -0.002" to 0.002" | 0.097" | 1 | 0000000 | 0000 | 0000000 | 00000 |
| 5/32" | -0.002" to 0.002" | 0.128" | 1 | 0000000 | 0000 | 0000000 | 00000 |
| 3/16" | -0.002" to 0.002" | 0.16" | 1 | 0000000 | 0000 | 0000000 | 00000 |
| 7/32" | -0.002" to 0.002" | 0.191" | 1 | 0000000 | 0000 | 0000000 | 00000 |
| 1/4" | -0.002" to 0.002" | 0.222" | 1 | 0000000 | 0000 | 0000000 | 00000 |