We will reply to your message within an hour.
Use this tubing in high-temperature applications up to 390° F.
A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.
Stretch it, bend it, compress it – this tubing will spring back to its original shape.
This tubing won’t degrade when exposed to the damaging effects of UV light.
Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.
Thick walls give this tubing excellent abrasion resistance.
Lightweight, spongy walls provide thermal insulation, so this tubing won’t produce condensation when cold air or fluid runs through it.
This self-extinguishing tubing meets UL 94 V-0 and UL 94 V-1 for flame retardance, so it delays the spread of flames to valuable equipment.
Multiple colors allow you to color-code your line for easy identification.
With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.
A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.
This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.
Static electricity will not build up in this tubing, so you can use it near sensitive equipment.
An inner liner releases silver ions to inhibit the growth of bacteria, mold, fungi, and other odor-causing microbes.
Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.
Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.
This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.
Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.
Safely power seat controls, horns, and other vehicle parts with compressed air.
This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.
To protect sensitive equipment, this tubing is made of nylon that’s specially formulated to let currents pass through, preventing static electricity buildup.
Made of moisture-resistant plastic, this tubing won't soften and lose strength, even in high-humidity environments.
Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t.
Run chemicals through this tubing at temperatures between -100° F and 500° F.
Ultraviolet light won’t cause this tubing to degrade or deteriorate.
A lightweight alternative to stainless steel, this tubing can handle extreme-pressure applications up to 1,000 psi.
Hard walls give this tubing excellent strength in high-pressure and vacuum applications.
Made of highly chemical-resistant materials, this tubing withstands harsh chemicals such as hydrochloric acid, sodium hydroxide, and sulfuric acid.
Use this resilient tubing in high-temperature chemical applications up to 400° F.
Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.
With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.
This tubing can withstand high-temperature chemical applications up to 400° F.
An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.
Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.
With a diameter of 2" or larger, this tubing has the girth to handle high-volume beverage and bulk food processing applications.
Hot food and beverage applications won’t harm this tubing—it can handle temperatures up to 390° F.
The smooth, nonabsorbing interior on this tubing resists material buildup, so it is easy to clean.
Lighter than other plastic and rubber tubing, but extremely tough, this tubing stands up to the wear and tear of daily use.
Conductive material embedded in the walls lets this tubing divert static buildup away from sensitive equipment when conveying dry materials such as flour, salt, and sugar. Tubing has a diameter of 4" or larger to handle bulk food processing applications.
Move high volumes of dry bulk food, powders, and pellets around your food processing plant while reducing the risk of contaminating the food.
Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.
This tubing offers superior impact and crack resistance—even at low temperatures.
This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.
Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.
This durable tubing won’t crack under stress—even when temperatures drop below freezing.
With the best oil resistance of all our fuel and lubricant tubing, this tubing won’t deteriorate or become brittle when exposed to oil—even with long-term use.
This tubing can handle the highest temperatures of all of our fuel and lubricant tubing. Use it in applications up to 450° F.
Hard walls give this tubing the strength to handle high-pressure fuel and gasoline applications.
This tubing has hard walls like copper tubing, but is lighter in weight and easier to install. It connects to fittings with no heat or soldering required. Tubing meets NSF/ANSI Standard 61 for drinking water.
A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.
Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.
Make lightweight connections without the hassle of matching the exact thread type—these fittings connect to NPT, NPTF, BSPP, BSPT, and other universal threads.
Made of brass, these fittings have good corrosion resistance.
These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.
The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.
Connect high-pressure brake lines with fittings that won’t crack in frigid temperatures. Often used on commercial trucks and trailers, these fittings meet Department of Transportation FMVSS 571 safety standards.
Connect air brake lines with fittings that won’t crack in sub-zero temperatures. They meet Department of Transportation FMVSS 571 safety standards, so they’re often used in commercial trucks and trailers.
Designed for use in welding applications, these fittings are flame retardant.
Ball bearings allow these fittings to rotate 360°, even after they are tightened. They have a special seal that reduces friction to allow for continuous rotation.
Made of EPDM, the gasket on these fittings stands up to the hot water found in heat exchangers and cooling systems. These fittings have stainless steel pipe threads, which are more durable than the plastic pipe threads found on other push-to-connect tube fittings.
Barbs grip onto tubing.
Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.
You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to hold the tubing in place.
Lighter in weight than their metal counterparts, these compression fittings are polypropylene.
Made of plastic, these couplings are lighter in weight than metal quick-turn couplings.
A built-in shut-off valve stops the flow when the coupling is separated, so there’s no need to worry about air or water spilling from your line. Couplings are plastic, which is lighter in weight than metal couplings.
Lighter in weight than their metal counterparts, these quick-disconnect couplings are made of acetal plastic. They are moisture resistant, so they won’t absorb water and lose strength, even in high-humidity environments.
A spring-free flow path allows more air or water to pass through these tube couplings at lower line pressures than other quick-disconnect couplings.
Slide tubing into these fittings and secure with a clamp. Use at low pressures up to 80 psi.
A smooth interior reduces friction and prevents product buildup, ensuring an unrestricted flow.
Also known as instant fittings, these connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.
These quick-disconnect couplings meet NSF/ANSI 169 for food equipment.
Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push. An internal gripping ring holds the tubing tight.
Fittings have a sleeve that bites into tubing as you tighten the nut to form a seal in applications up to 120 psi. Also known as flareless fittings.
Fittings have a barb that grips onto tubing. Use in applications up to 120 psi.
Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line.
These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.
Fittings can withstand temperatures up to 200° F.
Use these nuts with brass compression fittings to create a seal on plastic tubing. They meet NSF/ANSI 61 for use with drinking water.
Connect stainless steel tubing on one end and plastic tubing on the other end.
Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.
No clamps or banding are needed to secure fittings to this hose; the more you pull on the fittings, the tighter the hose will grip.
Transfer and spray water at low pressures.
Made of a PVC/Buna-N blend, this hose is lighter than standard EPDM water hose.
Made of a PVC and Buna-N blend, this hose is lighter in weight than standard EPDM water hose.
Lighter than standard EPDM water hose, this PVC/Buna-N hose connects to a male threaded fitting on one end and a female one on the other.
Certified to meet NSF/ANSI 61, this hose is safe for use in drinking water systems.
Made of high-purity PVC with 303 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.
Transfer and spray water at low pressure. This hose comes with brass fittings, which are softer than stainless steel fittings for easier threading.
Made of high-purity PVC with 316 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.
The blended rubber cover on this hose won't break down if exposed to oil, animal fats, or grease as you wash down equipment with hot water.
Wash down equipment in food-processing plants, dairies, and other facilities with hot water.
With fittings already attached, it’s easy to connect this hose to a washdown station and wash gun.
To prevent breaking down from contact with oil, animal fats, and grease as you wash down equipment with hot water, this hose is covered in blended rubber. It comes with fittings already attached, so it’s easy to connect to a washdown station and wash gun.
Also known as furnace door hose, this water hose has a resin-coated fiberglass cover that withstands intermittent heat up to 1,000° F and splashes of molten metal and glass.
Reach for this neoprene rubber hose to handle processes requiring high-pressure, high-temperature washdowns.
The steel wire reinforcement gives this hose extra strength in high-pressure conditions.
Power away dirt with this heavy duty rubber hose that's also known as pressure-washer hose.
The cover on this hose meets MSHA (Mine Safety and Health Administration) standards for flame resistance.
Offering excellent UV and ozone resistance, this rubber hose is a good fit for outdoor applications.
Bend and flex this hose in the coldest weather—down to -30° F.
Hose is made of lightweight, nonmarring PVC.
When your process requires hot water, reach for this rubber hose.
Hose blends the flexibility of PVC with the durability and abrasion resistance of rubber.
Safely transfer drinking water from a garden hose connection.
Let go of this hose and it retracts back to its original coiled form.
Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.
Keep your water running in temperatures down to -20° F.
Hose is designed to ensure water keeps flowing even if the hose kinks.
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.
Draw water out of pits, loading docks, and other areas prone to flooding through lines connected by cam-and-groove fittings.
Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.
Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.
Safely suction, transfer, and dispense drinking water.
With flanged ends that join with quick-clamp fittings, it’s easy to disconnect this hose for cleaning. It meets NSF/ANSI 61, a strict standard for drinking water systems, and is 3-A certified for its sanitary design.
Pull water out of wells, tanks, and other drinking water sources through lines connected by cam-and-groove fittings.
Drain water from one place to another. Hose lays flat and folds up for carrying and storage.
Certified to meet NSF/ANSI 61, this discharge hose is safe for use with drinking water. It lays flat when not in use, so you can roll it up for easy transport and storage.
Attach barbed fittings to this hose for use in low-pressure air applications.
Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting.
Hose is PVC, so it’s lighter and less cumbersome than rubber hose.
Identify your air lines by color.
An extra-strong yarn reinforcement gives this hose excellent durability to handle higher pressures than standard air hose.
Transfer compressed air that’s up to 500 psi—this hose has extra-strong yarn reinforcement for excellent durability.
The rubber cover meets MSHA (Mine Safety and Health Administration) standards for flame resistance, so this hose is often used to transfer highly compressed air in robotic welding systems.
Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.
Made of PVC, this hose stays flexible in temperatures as low as -65° F.
With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.
Create a retracting air line that meets your needs.
Hose is polyurethane so it stretches and flexes more than nylon retracting hose.
Made of thick, rigid nylon, this hose has excellent durability and the highest pressure rating of the retracting hose we offer.
Supply air to two power tools without worrying about your lines getting tangled.
Safely deliver compressed air to brakes in semitrucks, trailers, and other vehicles with this D.O.T. certified hose. Made of flexible nylon, it will bounce back to its coiled form even after long periods of use.
Bend this hose around obstructions and corners, and the aluminum tube reinforcement holds its shape.
Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.
A female fitting on one end swivels until tightened, making it easy to install without rotating the entire hose.
Heat chemicals to prevent them from freezing or becoming too thick. With a self-regulating heating wire, the liquid inside this hose stays warm and keeps flowing.
The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.
Yarn reinforcement gives this hose good strength under pressure.
Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.
Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.
Step on this hose and it springs back to its original shape.
You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.
Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.
Not only can this hose withstand high temperatures, it won't collapse in low-vacuum applications. It's also known as radiator hose.
Move coolant around tight turns in crowded spaces. Made of silicone, these elbows withstand high temperatures up to 350° F.
Commonly known as radiator hose, this hose is for low-pressure coolant applications.
With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.
Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer.
Blue for cold and red for hot—this hose is color coded so you won’t mix up your coolant supply lines. Use it in data centers to connect servers to a cooling manifold.
Bend this hose in any direction and it won’t kink, even when routed through tight spaces.
An EPDM cover guards this hose, so it won't tear if scraped or break down from ozone or UV light. Use it to move milk, syrup, meat, and other wet and food and beverages.
With a tough EPDM cover, this hose won’t wear down from rubbing or scraping, crack from ozone, or degrade from UV light. It has flanged ends that join with quick-clamp fittings, so you can easily access lines that carry milk, syrup, meat, and other wet food and drinks.
Blended with Buna-N, this hose remains flexible and won’t break down from oily or fatty food and beverages.
For easy access to lines that handle oily and fatty foods and beverages, this hose has flanged ends that join with quick-clamp fittings.
Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed.
Transport wet food and drink at high pressures with a hose connected by sanitary fittings.
Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.
Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed. Its fittings easily detach, giving you quick access to your line.
Easily access lines that move highly alcoholic or acidic wet food and beverages—this hose has flanged ends that join with quick-clamp fittings.
Suction, transfer, and dispense wet food and beverages with up to 99% alcohol concentrations.
The most durable dry-food hose we offer, this hose is made of gum rubber for excellent resistance to cuts and tears.
This hose meets CGA (Compressed Gas Association) standards for use with oxygen and acetylene gas.
Run natural and LP gas through this heavy duty hose that's flexible enough for routing through walls and ceilings.
Change the fuel source for your propane torch from a fuel cylinder to a propane tank. This hose is often used for extended-use applications, or when a propane tank can’t be moved.
Rated for low-pressure applications up to 500 psi, this hose works well as a return line in your hydraulic system.
Attach push-on barbed fittings to this hose for use in low-pressure hydraulic applications. No clamps are needed to secure fittings to the hose; the more you pull on the fittings, the tighter the hose will grip.
Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose.
Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. The fittings come attached, so this hose is ready to connect to a male threaded fitting on one end and a female one on the other.
Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. It comes with female threaded fittings already attached, so it’s ready to use right out of the box.
Made of nylon with a polyurethane cover, this hose is half the weight but 240 times better at resisting wear and tear than our standard rubber hydraulic hose. The male threaded fittings come already attached to save you time.
Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system. It comes with female threaded fittings already attached, so it’s ready to use right out of the box.
Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system.
Transfer fluid between pumps, cylinders, and other parts of your hydraulic system.
The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.
For frequent connections, this hose has a socket end that's faster to connect and disconnect than a threaded fitting. Thanks to two layers of blended rubber, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.
The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. The fittings come attached, so this hose is ready to connect to a male threaded fitting on one end and a female one on the other.
For frequent connections, this hose has a socket end that's faster to connect and disconnect than a threaded fitting. This hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose, thanks to its two layers of blended rubber.
The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. It comes with female threaded fittings already attached, saving you time.
When you need access to your line, don’t waste time threading and unthreading your fittings. This hose has a quick-disconnect fitting on both ends. It bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.
The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. To save you time, it comes with male threaded fittings already attached.
Prevent electrical shock and damage to equipment while moving hydraulic fluid near high voltages.
With four steel wire spirals for reinforcement, this hose handles rapid changes in pressure and flow without bursting.
Internally reinforced with four steel wire spirals, this hose resists bursting from rapid changes in pressure and flow. To save you time, this hose comes with female threaded fittings already attached.
To handle rapid changes in pressure and flow without bursting, this hose is reinforced with four steel wire spirals. It comes with male threaded fittings already attached, so it's ready to use right out of the box.
Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.
With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.
Commonly used to transfer gasoline, this hose is also known as curb pump hose.
Transfer fuel oil with a hose that stays flexible in subzero conditions.
Multi-spiral yarn reinforcement gives this hose strength to withstand pressures up to 250 psi.
Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment.
Hose has good oil-resistance, so it won’t deteriorate or become brittle when exposed to grease and lubricants.
This hose is made of tough gum rubber that stands up to sand, steel shot, and other abrasives.
Developed to stand up to mining slurries, including those containing coal, this hose can handle your most abrasive mixtures of water and solids.
A braided exterior protects this hose from abrasion and over-bending. Also known as bellows, the ribbed interior makes it flexible enough to connect high-vacuum components that aren't directly aligned.
More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.
Also known as air brake hose, this hose safely powers brakes in semitrucks, trailers, and other vehicles with compressed air.
Hook up this hose to a single-hose paint-spray system to transfer oil- and water-based paints.
To transfer air or oil- and water-based paints, attach this hose to a paint-spray system that has separate hoses for air and paint. Fittings swivel until tightened for easy installation. Fittings with spring guards prevent kinking.
Use hose to charge and test your air conditioning units.
Each hose is a different color so you can differentiate your lines.
Also known as pin-rack hose, this hose can be folded to fit in a rack.
Lightweight yet tough, this hose has an abrasion-resistant polyester cover.
Two heavy duty polyester covers protect this hose.
Differentiate your hose by color. The abrasion-resistant polyester cover on this hose comes in red, white, or yellow.
Avoid contamination as you supply a selective catalytic reduction (SCR) system with diesel exhaust fluid (DEF). Made of peroxide-cured EPDM with stainless steel fittings, this hose won’t leach contaminants into DEF.
Maintain the purity of diesel exhaust fluid (DEF) as you move it from tanker trucks to storage tanks. The fittings make it easy to connect and disconnect the line.
Connect this pipe to standard-wall plastic pipe fittings for a variety of residential and commercial low-pressure plumbing and water supply applications.
Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.
Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.
An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.
Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.
This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.
The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes.
This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.
A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.
CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.
Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.
Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.
Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.
Often used in place of aluminum for structural frames, machinery components, and robotics, these tubes are lighter in weight and almost as rigid.
Mount these lightweight tubes to flat surfaces in place of aluminum to create structural frames, machinery components, and robotics.
Fit these lightweight tubes inside each other to create adjustable tubes for structural framing, machinery components, and robotics.
Often used for structural framing, machinery components, and robotics, these carbon fiber tubes are as stiff as steel yet a fraction of the weight.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.
Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.
Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.
Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.
Garolite CE is often fabricated into parts where high strength is not required.
A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4.
Used in turbine bearings, downpipe gaskets, and other machinery, these Garolite tubes withstand heavy impacts and temperatures as high as 500° F.
Rated for temperatures down to -450° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.
More electrically insulating than Garolite XX, these tubes are often machined into insulating washers, bushings, transformer spacers, and parts of terminal boards.
An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.
Use these round GPO3 fiberglass tubes for electrical applications in humid environments.
Route and insulate wire using these square fiberglass tubes, which fit better along edges and around corners than round tubes.
Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.
Kevlar is a super-tough material that stands up to wear and abrasion.
Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure.
Made of PVC, this sleeving resists chemicals, oil, and acids. A track along its length locks together like a zip-close bag to tightly seal out water, dust, and debris better than other wrap-around sleeving.
Use this general purpose tubing to insulate and protect wire and cable.
The smallest heat-shrink tubing we offer, this tubing protects wire with a 0.017" and smaller diameter.
Extra-thick walls provide more protection against abrasion and tears than standard high-shrink-ratio tubing. This tubing shrinks down to 1/6th of its original ID, so it creates a tight seal over irregularly shaped objects.
This tubing creates a tight seal over irregularly shaped objects.
For better protection against abrasion, tears, and punctures, this tubing has thicker walls than standard tubing.
Identify ground wire with this green-and-yellow striped tubing.
Extra-thick walls provide better protection against abrasion and tears than standard moisture-seal tubing, as well as creating a water-resistant seal.
Create a water-resistant seal—this tubing has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface.
Made of PVC, this tubing resists chemicals, oil, and solvents. The adhesive lining creates a water-resistant seal when heated.
Create a tight, water-resistant seal over irregularly shaped components. When heated, this tubing shrinks down to about 1/6th of its original ID, while an adhesive lining melts and forms a barrier around your component.
Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.
Resistant to diesel fuel, gasoline, hydraulic fluid, and lubricating oil, this tubing is often used in vehicles.
Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. It has excellent resistance to chemicals, oil, and acids.
Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.
Made of woven polyolefin/polyester fabric, this tubing has excellent abrasion resistance so it can be dragged over rough surfaces without damage.
Insulate and protect high-voltage devices. This tubing withstands higher voltages than standard heat-shrink tubing because it’s made of a flame-retardant material with excellent electrical insulation properties.
Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.
Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.
Approved for contact with food, this tubing is FDA Compliant 21 CFR 177.1330.
A layer of conductive cloth protects wire and cable from signal interference caused by nearby equipment and devices.
After being cleaned with alcohol, this tubing is bagged and sealed in a clean room. It's certified for material quality and purity.
Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.
Keep general purpose tubing in a variety of sizes on hand.
Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.
Create a permanent seal without applying heat. This tubing is also known as cold-shrink tubing.
Use this wrap with heat-shrink tubing to create a moisture-resistant seal. Apply it like tape around wire and cable, then slide the tubing over the wrap. The wrap melts when tubing is heated and bonds to the underlying surface.
Seal the end of crimped connections, such as motor coils, to insulate and protect them from moisture and abrasion.
A different shrink ratio on each end allows this tubing to fit over cable assemblies and wire harnesses with large connections, or around connectors with a 90° elbow.
With a spiral-wound core, these end caps form a permanent seal on the end of your crimped wire or cable without heat or tools.
Protect wire and cable without disconnecting them from an assembly. For a water-resistant seal, this tubing has an adhesive lining that melts when heated to bond it to the underlying surface.
Protectively sheath materials, such as thermocouples, that move between hot and cold environments. Similar to nonporous alumina tubes, air and gas cannot pass through these mullite tubes.
Often used as a protective shield in thermocouples and other conditions with drastic climate changes, these SiAlON ceramic tubes won't deform, expand, or crack when repeatedly exposed to large temperature changes.
These mica tubes resist temperatures up to 930° F. Also called muscovite mica.
Adjust these tubes by twisting the two halves. A hexagonal end prevents rolling.
These tubes are easier to label and stack than round tubes. To adjust the length, push the ends of the tube together or pull them apart.
Made of recycled polyethylene, these shipping tubes are more sustainable than standard plastic shipping tubes. Push the ends together or pull them apart to adjust the length.
Made of recycled polyethylene, these shipping tubes are a sustainable alternative to other plastic shipping tubes. They won’t roll around, making them easier to label and stack than round tubes.
Don’t wait for grease to travel through a new service line—install this grease-filled tubing between the pump and a lubrication point to begin lubricating immediately.
Hook up faucets and other appliances to a water supply with these flexible hoses.
Drain water from washing machines and dishwashers.