We will reply to your message within an hour.
The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.
Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.
A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench.
Ratchet mechanisms allow you to turn fasteners in tight spaces without removing and repositioning the tool.
An insulated handle protects against accidental contact with live electrical circuits. These wrenches are tested to 1,000 volts to meet IEC 60900.
An extra-long handle provides access to hard-to-reach fasteners and increases leverage.
The offset head gives you additional clearance to turn hard-to-reach fasteners.
The 25° offset heads give you additional clearance to turn hard-to-reach fasteners.
The long handle provides extra leverage—add an extension to increase it even more.
The head is offset 45° to provide clearance for reaching over obstructions.
The heads are angled to provide clearance around obstructions.
Also known as half-moon and obstruction wrenches, the shape lets you reach around obstacles and into machinery.
Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.
Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free.
Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.
The heads are offset to provide clearance for reaching over obstructions.
These wrenches are polished for a mirror-like finish.
The heads are offset 45° to provide clearance for reaching over obstructions.
The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.
Make maximum contact with all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.
Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.
Turn nuts on bolts and threaded rod, which can pass through the short end of the wrench. For additional leverage, slip a bar through the short end to create a T-handle.
Turn lug bolts on car and truck wheels. These wrenches have a different socket size at each end.
Pivot the socket end to access hard-to-reach fasteners.
These wrenches have one pivoting socket end and one open end.
Also known as a basin wrench, this tool has a pivoting head and spring-close jaws for working in tight spaces where it’s difficult to adjust a traditional wrench.
Extend the handle for additional reach.
The jaws on these wrenches are shaped to turn slip nuts, jam nuts, and large hex nuts.
Fit the thin head and long jaws into narrow spaces.
These tools have the heavy duty handle and adjustment mechanism of a pipe wrench and the smooth jaws of a traditional adjustable wrench.
These wrenches are made of stainless steel for excellent corrosion resistance.
A plastic-covered handle provides a comfortable grip.
The adjustment knurl won't turn when the wrench is being used, preventing accidental loosening of the jaws.
Press the lever to lock the jaw and keep these wrenches clamped on your work, leaving your hands free.
The handle is covered in plastic for a comfortable grip.
A ratchet mechanism in the head allows you to turn fasteners in tight spaces without removing and repositioning the wrench.
Reverse the movable jaw to convert from a smooth-jaw adjustable wrench to a serrated-jaw pipe wrench.
Flip the wrench over to use the raised section on the head as a hammer.
Also known as spud, structural, and construction wrenches, the pointed end of the handle aligns bolt holes during assembly.
Turn fasteners with the firm grip of a wrench and the adjustability of pliers.
The handles are covered in plastic for a comfortable grip.
Hold and turn pipe, tubing, and conduit with these heavy duty wrenches.
An extra-long handle provides leverage for turning heavy or stuck objects. These wrenches are also known as chain tongs.
Using your ratchet wrench as a handle, access hard-to-reach caps and plugs or grip objects of almost any shape.
Turn the adjustment screw and squeeze the handle to lock the chain in place; press the lever to release.
Pair these tools with your ratchet wrench to get more leverage.
The nonmarring strap grips plastic pipe, tubing, hand wheels, filters, and objects with highly polished surfaces.
While some wrenches require you hold the strap, these have a shackle that keeps the strap closed for extra turning force and quick adjustment.
Replace the strap on your strap wrench.
Pivot the head to clear obstructions and turn filters and other cylindrical objects in hard-to-reach areas.
Cut the supply of water or gas.
Turn off the main supply of water or gas at the point it enters your facility.
Shaped to grip a valve handle, these wrenches turn corroded or hard-to-reach toilet and sink valves without overtightening.
Install and repair sink drain traps and fittings.
In addition to standard and pop-up sink drains, these wrenches install and remove overflow outlets and toilet inlet connectors (also known as spuds).
Insert into a pipe or fitting and turn—the wrench grips the walls for easy installation and removal without marring the outside of the pipe.
Open and close the jaws with one hand. Press the lever and slide the bottom jaw to the desired position; tension keeps it in place.
Grip pipe and conduit as well as tighten and loosen fittings.
Replace nuts on pipe wrenches.
Replace springs in pipe wrenches.
There's no adjustment nut or button on these wrenches—a spring-loaded hinge automatically closes the top jaw around pipe.
Made of materials that are Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.
The jaws grip most round surfaces, even highly polished objects. Push down on the wrench and pull the handle toward you—the jaws will tighten around the workpiece.
Also known as monkey and auto wrenches, these grip large fasteners and other flat objects.
Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They are also known as railroad wrenches.
Use one end as a traditional pipe wrench and the other to loosen valve wheels. These are also known as engineers’ pipe wrenches.
Turn the end of the handle to set torque, and the wrench makes an audible click when it reaches the setting.
Also known as a can socket wrench, this tool opens telephone box fasteners and tightens nuts on binding posts.