Filter by
Bristle Flexibility
DFARS Compliance
About Brushes
More
Low-Scratch Tube Brushes
Round Shank
Clean delicate surfaces inside tubes, pipes, and holes. The bristles won't leave behind debris that could cause rust on your workpiece.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | Stem | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Dia. | Flexibility | No. of Spirals | No. of Wires | Wire Material | O'all Lg. | Max. Speed, rpm | For Use With | 1-11 | 12-Up | |
Round Shank | |||||||||||||
Brass Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||||||
| 3/16" | 1/4" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 3/16" | 1/4" | 1 1/2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 4" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 1/4" | 5/16" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 5/16" | 1 1/2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 4" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 1/4" | 3/8" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 3/8" | 1 1/2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 4" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 1/4" | 7/16" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 7/16" | 2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 1/4" | 1/2" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 1/2" | 2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 1/4" | 9/16" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 5/8" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 11/16" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 9/16" | 2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 5/8" | 2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 11/16" | 2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 3/4" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 3/4" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 13/16" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 13/16" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 7/8" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 7/8" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 15/16" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 15/16" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 1" | 1" | 0.008" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 1" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 1 1/8" | 1" | 0.008" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 1 1/8" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 1 1/4" | 1" | 0.008" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 1 1/4" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
Tube Brushes
Round Shank
Remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | Stem | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Dia. | Flexibility | No. of Spirals | No. of Wires | Wire Material | O'all Lg. | Max. Speed, rpm | For Use With | 1-11 | 12-Up | |
Round Shank | |||||||||||||
Steel Bristles—For Use On Steel, Plastic | |||||||||||||
| 3/16" | 1/4" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 1/4" | 5/16" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 3/8" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 7/16" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 1/2" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 9/16" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 5/8" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 11/16" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 3/4" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 13/16" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 7/8" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 15/16" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 1" | 1" | 0.008" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 1 1/8" | 1" | 0.008" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 1 1/4" | 1" | 0.008" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 3/8" | 1 1/4" | 1 1/2" | 0.008" | Flexible | 1 | 2 | Galvanized Steel | 2 7/8" | 2,000 | Drills | 00000000 | 00000 | 00000 |
| 3/8" | 1 1/2" | 1 1/2" | 0.008" | Flexible | 1 | 2 | Galvanized Steel | 2 7/8" | 2,000 | Drills | 00000000 | 00000 | 00000 |
| 3/8" | 2" | 1 1/2" | 0.008" | Flexible | 1 | 2 | Galvanized Steel | 2 7/8" | 2,000 | Drills | 00000000 | 00000 | 00000 |
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||||||
| 3/16" | 1/4" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 5/16" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 3/8" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 7/16" | 1" | 0.004" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 1/2" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 9/16" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 5/8" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 1/4" | 11/16" | 1" | 0.005" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 3/4" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 13/16" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 7/8" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 15/16" | 1" | 0.006" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 1" | 1" | 0.008" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 1 1/8" | 1" | 0.008" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
| 5/16" | 1 1/4" | 1" | 0.008" | Flexible | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 0000 | 0000 |
Aggressive-Cleaning Tube Brushes
Round Shank
Use for tasks such as removing weld slag, heavy surface contamination, and large burs from tubes, pipes, and holes. These brushes typically have more bristles and more rigid stems than brushes for light cleaning.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | Stem | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Dia. | Flexibility | No. of Spirals | No. of Wires | Wire Material | O'all Lg. | Max. Speed, rpm | For Use With | 1-11 | 12-Up | |
Round Shank | |||||||||||||
Steel Bristles—For Use On Steel, Plastic | |||||||||||||
| 3/16" | 1/4" | 1 1/2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 4" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 000000 | 00000 |
| 1/4" | 5/16" | 1 1/2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 4" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 1/4" | 3/8" | 1 1/2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 4" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 1/4" | 7/16" | 2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 1/4" | 1/2" | 2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 5/16" | 9/16" | 2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 5/8" | 2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 11/16" | 2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 3/4" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 13/16" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 7/8" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 15/16" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 1" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 1 1/8" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 1 1/4" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||||||
| 3/16" | 1/4" | 1 1/2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 4" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 1/4" | 5/16" | 1 1/2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 4" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 1/4" | 3/8" | 1 1/2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 4" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 0000 |
| 1/4" | 7/16" | 2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 1/4" | 1/2" | 2" | 0.004" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 9/16" | 2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 5/8" | 2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 11/16" | 2" | 0.005" | Rigid | 2 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 3/4" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 13/16" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 7/8" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 15/16" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 1" | 2 1/2" | 0.010" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 1 1/8" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 5/16" | 1 1/4" | 2 1/2" | 0.006" | Rigid | 2 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
Sanding Tube Brushes
Round Shank and Flexible Bristles
Round Shank and Rigid Bristles
Abrasive grains are embedded in the entire length of the bristles to remove workpiece material as well as surface contamination in a single step. The nylon bristles won't leave behind debris that could cause rust on your workpiece and are recommended for use around acids and alkalies.
Flexible bristles are used to remove light-to-medium rust and stains and small burs.
Rigid bristles are used to remove weld slag, heavy surface contamination, and large burs.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | Stem | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Dia. | No. of Spirals | No. of Wires | Wire Material | O'all Lg. | Max. Speed, rpm | For Use With | Abrasive Material | Choose a Grit | 1-11 | 12-Up | |
Round Shank | ||||||||||||||
Flexible Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | ||||||||||||||
| 3/16" | 1/4" | 1" | 0.022" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 1/4" | 5/16" | 1" | 0.022" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 1/4" | 3/8" | 1" | 0.022" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 1/4" | 7/16" | 1" | 0.022" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 1/4" | 1/2" | 1" | 0.022" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 1/4" | 9/16" | 1" | 0.022" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 1/4" | 5/8" | 1" | 0.040" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 1/4" | 11/16" | 1" | 0.040" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 5/16" | 3/4" | 1" | 0.040" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 5/16" | 13/16" | 1" | 0.040" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 5/16" | 7/8" | 1" | 0.040" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 5/16" | 15/16" | 1" | 0.040" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 5/16" | 1" | 1" | 0.040" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 5/16" | 1 1/8" | 1" | 0.040" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 0000 | 0000 | |
| 5/16" | 1 1/4" | 1" | 0.040" | 1 | 2 | Stainless Steel | 3 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 0000 | |
Rigid Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | ||||||||||||||
| 3/16" | 1/4" | 2" | 0.022" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 1/4" | 5/16" | 2" | 0.022" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 1/4" | 3/8" | 2" | 0.022" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 320 (For Extra-Smooth Finish) | 00000000 | 00000 | 00000 |
| 1/4" | 3/8" | 2" | 0.040" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 1/4" | 7/16" | 2" | 0.022" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 320 (For Extra-Smooth Finish) | 00000000 | 00000 | 00000 |
| 1/4" | 7/16" | 2" | 0.040" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 1/4" | 1/2" | 2" | 0.022" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 320 (For Extra-Smooth Finish) | 00000000 | 00000 | 00000 |
| 1/4" | 1/2" | 2" | 0.040" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 1/4" | 9/16" | 2" | 0.022" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 320 (For Extra-Smooth Finish) | 00000000 | 00000 | 00000 |
| 1/4" | 9/16" | 2" | 0.040" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 5/16" | 5/8" | 2" | 0.040" | 1 | 4 | Galvanized Steel | 5" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 5/16" | 11/16" | 2 1/2" | 0.040" | 1 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 5/16" | 3/4" | 2 1/2" | 0.040" | 1 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 5/16" | 13/16" | 2 1/2" | 0.040" | 1 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 5/16" | 7/8" | 2 1/2" | 0.040" | 1 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 5/16" | 15/16" | 2 1/2" | 0.040" | 1 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 5/16" | 1" | 2 1/2" | 0.040" | 1 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 5/16" | 1 1/8" | 2 1/2" | 0.040" | 1 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
| 5/16" | 1 1/4" | 2 1/2" | 0.040" | 1 | 4 | Galvanized Steel | 5 1/2" | 2,000 | Drills, Grinders for Bits and Burs | Silicon Carbide | 00000000 | 00000 | 00000 | |
Tube Brushes for Closed-End Holes
Bristles at the top of these brushes clean the bottom of closed-end holes. The bristles are enclosed in a tube, which prevents them from flaring during use and allows you to alter their length. As the brush wears, trim the tube with a pipe cutter to expose more of the bristles.
Stainless steel bristles won't leave behind debris that could cause rust on your workpiece.
Brush | Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Dia. | Flexibility | O'all Lg. | Max. Speed, rpm | For Use With | Each | |
Round Shank | |||||||||
Steel Bristles—For Use On Steel, Plastic | |||||||||
| 1/4" | 1/4" | 3 3/4" | 0.010" | Flexible | 3 3/4" | 8,000 | Drills, Grinders for Bits and Burs | 000000 | 000000 |
| 3/8" | 3/8" | 3 3/8" | 0.010" | Flexible | 3 3/8" | 8,000 | Drills, Grinders for Bits and Burs | 000000 | 00000 |
Stainless Steel Bristles—For Use On Stainless Steel, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||
| 1/4" | 1/4" | 3 1/4" | 0.010" | Flexible | 3 1/4" | 8,000 | Drills, Grinders for Bits and Burs | 000000 | 00000 |
| 3/8" | 3/8" | 3 3/8" | 0.010" | Flexible | 3 3/8" | 8,000 | Drills, Grinders for Bits and Burs | 000000 | 00000 |
Flexible Tube Brushes for Closed-End Holes
Bend these brushes through curved holes and reach into corners. Bristles at the top clean the bottom of closed-end holes. A flexible spring surrounds the bristles to prevent them from flaring during use. As the brush wears, trim the spring.
Caution: Insert the brush into the workpiece before turning on your power tool. If used outside a hole, the brush could break off and become a dangerous projectile.