We will reply to your message within an hour.
More
Open and close circuits quickly to minimize arcing and prevent contacts from sticking. These switches are often used as door-open indicators on appliances and enclosures.
With a rubber-encased housing and stainless steel bracket, these switches resist vibration and corrosion. They're rated IP68 for protection from dust and temporary submersion.
Enclosures protect these snap-acting switches from the environment.
Rated NEMA 4 , these enclosed switches have a sealed actuator for protection from washdowns.
Keep out dirt and moisture—the sealed housing on these switches is watertight and meets MIL-PRF-8805.
Rated IP67, these switches have an enclosure that shields their interior during temporary submersion. They open and close circuits quickly to prevent arcing and keep contacts from sticking.
Smaller than standard size snap-acting switches, these fit in tight spaces.
The smallest snap-acting switches we offer, these fit into the tiniest of spaces.
Actuate these switches with a fraction of the force of other subminiature switches for increased responsiveness. Among the smallest snap-acting switches we offer, they fit into the tiniest of spaces.
Built for tight spaces exposed to water, these switches have a housing that's less than 1" long and IP67 rated for protection from temporary submersion.
These switches actuate with the slightest push for a high degree of accuracy.
Sealed actuators prevent these switches from jamming, even when exposed to oil, sand, mud, or ice.
Often used on conveyor systems and bin filling operations, these switches have the rapid-closing action of a snap-acting switch but have a large actuator for sensing larger objects.
Start or stop equipment after a set number of rotations to avoid over-rotation.
Safely open or close a circuit near ignitable gases and dust—the housing on these switches seals in anything that could ignite flammable material.
These switches actuate with the slightest push for a high degree of accuracy. They're rated IP67 for protection from wet locations and temporary submersion.
Prevent equipment from automatically restarting—these switches must be manually reset each time they're actuated.
Rated NEMA 6P, 13, and IP67, these switches are protected from corrosion, oil/coolant spraying, washdowns, and temporary submersion.
Sealed actuators prevent these switches from jamming, even when exposed to sand, mud, or dirt. They're rated IP67 for protection from temporary submersion.
Shorter and thinner than other safety limit switches, these are sized to fit tight spaces.
Protect machinery and ensure the safety of personnel—these switches will open the circuit when actuated even if a spring fails or the contacts stick.
Rated IP67, these switches are protected from temporary submersion. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit.
Stack these slim switches together, or fit them into tight spaces. They're rated IP67 for protection from temporary submersion.
Secure these switches into panels using mounting nuts.
Prevent automatic doors from closing on a person or an object—these switches immediately turn machinery off when actuated with minimal force.
Sized for 4 mm or 6 mm panel cutouts, these switches are often used with circuit boards to control electronics.
Install in 10 mm dia. cutouts.
Add these switches to your abrasive blasting hose to prevent it from spraying if the operator loses control. Also known as deadman switches, they prevent injuries and reduce wasted material by springing back to the off position when the operator lets go.
Create one action with these valves, such as extending a cylinder.
Control these valves with one hand. Also known as 4/2 valves, they create two actions, such as extending and then retracting a double-acting cylinder.
Often used to extend and then retract a cylinder at different speeds, these valves create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Also known as 4-way and 5/2 valves.
Often used in testing and sampling applications, these valves open and close with the push of a button. They are designed for installation in tight spots. Use with water, oil, and air.