Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose. Use the attachment to adjust the spray pattern from mist to solid stream.

Wash gun has a rinse lever that allows you to instantly change from using the wash solution to rinsing with clean water. Set to mix 2 oz. of cleaner per gallon of water.

Foam gun creates thick foam. Gun mixes up to 12 oz. of foaming chemicals per gallon of water.

Control the flow while dispensing diesel fuel. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Nozzles with automatic shut-off will stop dispensing when the tank is full or if the nozzle falls from the tank. They have a built-in check valve that reduces spillage when withdrawing the nozzle from tank. Nozzles have an angled design, which reduces hose kinking for efficient fueling. They come with a plastic scuff guard to protect the nozzle from damage.

Nozzles with manual shut-off have a trigger to stop the flow. Do not leave the nozzle unattended when in use.

Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.

Style A is also known as a service-station-style nozzle. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. Attach an optional splash guard (sold separately) to protect your hands from spray.

Styles B and C are also known as truck-stop nozzles. They have higher flow rates than Style A to dispense large quantities of fuel quickly. Style C includes a splash guard to protect your hands from spray.

Style D has the largest spout and the highest flow rate of all the nozzles for use with trucks, buses, and other heavy-duty bulk fueling applications.

Use hold-open clip kits to replace a broken clip. Install with pliers.

For technical drawings and 3-D models, click on a part number.

Adjust the flow while dispensing liquid chemicals. Nozzles are polypropylene, which is lightweight with excellent chemical resistance. They shut off manually.

Style A has a lever to turn flow on and off. It has a higher flow rate and bigger spout than Style B to dispense large quantities of liquid chemicals into drums and tanks quickly.

Style B has a trigger to turn flow on and off. It has an angled design, which reduces hose kinking for efficient fueling. Nozzle has a barbed connection; twist hose onto the barbed end and secure with a clamp. Use to transfer citric acid, nitric acid, phosphoric acid, and sodium hydroxide from pumps and processing equipment.

Warning: Do not leave nozzles unattended when in use.

For technical drawings and 3-D models, click on a part number.

Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC). The nozzles are made of either polypropylene or aluminum and the hose is PVC to resist corroding from citric acid, ethanol, and other chemicals. However, the nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. The nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.

Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.

Aluminum nozzles resist wear and tear better than polypropylene nozzles.

Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down. To resist corroding from citric acid, ethanol, and other chemicals, these nozzles are made of either polypropylene or aluminum and the hose is PVC. These nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. These nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.

Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.

Aluminum nozzles resist wear and tear better than polypropylene nozzles.

These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles. Nozzles will shut off automatically when the tank is full or if the nozzle falls from the tank. They have a built-in check valve to reduce spillage when withdrawing the nozzle from tank. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. A plastic scuff guard protects the nozzle from damage. Attach an optional splash guard (sold separately) to protect your hands from spray. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.

Use hold-open clip kits to replace a broken clip. Install with pliers.

For technical drawings and 3-D models, click on a part number.

Nozzles allow you to control the flow while dispensing hydraulic fluid. They shut off manually, so you’ll have to release the trigger to stop the flow. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Style A has a larger spout and a higher flow rate than Style B to dispense large quantities of hydraulic fluid quickly.

Style B is UL listed. It has an angled design, which reduces hose kinking for efficient fueling.

Warning: Do not leave nozzles unattended when in use.

For technical drawings and 3-D models, click on a part number.

Dispense and control the flow of coolant with these nozzles. They have a built-in check valve to reduce spillage when withdrawing the nozzle from the tank. Nozzles shut off manually, so you’ll have to release the trigger to stop the flow. They are brass for good corrosion resistance.

Warning: Do not leave nozzles unattended when in use.

For technical drawings and 3-D models, click on a part number.