Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line. Clamps with wing nut tighten by hand. Clamps with safety wing nut won’t release from minor loosening or jostling. They have a leak-before-burst design, which means they’ll leak to relieve pressure if the seal fails instead of bursting and causing a safety hazard.

Clamps with bolt tighten with a wrench. They handle higher pressures than wing-nut clamps for a stronger, more secure hold. Double-bolt clamps meet ASME design standards for pressure vessels.

Clamps with recessed nut require a hex socket adapter to loosen the nut, preventing the clamp from tampering and accidental removal. They have a hole for lockout (padlock not included) to block unauthorized access, helping you meet Hazard Analysis and Critical Control Point (HACCP) programs and Good Management Practices (GMP). Both of these security measures reduce the risk of product contamination. These clamps have a leak-before-burst design, so rather than burst dangerously if the seal fails, they’ll safely relieve pressure by dripping instead.

304 stainless steel clamps have very good corrosion resistance.

316 stainless steel clamps are more corrosion resistant than 304 stainless steel clamps. Clamps with two-pin hinge apply more even pressure on gaskets than other clamps, causing less wear and tear on gaskets.

Nylon clamps are lightweight compared to stainless steel clamps.

Clamps that meet DIN 11864 or DIN 32676 adhere to international standards for sanitary quick-clamp fittings.

Weld these fittings to tubing for a permanent, flush connection that permits smooth flow through a line.

304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.

DIN EN 10357 fittings meet an international standard for butt-weld fitting specifications. This standard is common in the food and chemical industries.

For technical drawings and 3-D models, click on a part number.

Connect tubing in sanitary food processing areas with frequent washdowns. Certified by EHEDG (European Hygienic Engineering and Design Group) to meet sanitary design standards, these fittings have a smooth, polished surface with no pits or crevices where bacteria could grow. All edges are rounded and there are no horizontal ledges, so liquids drain and debris is easy to wash off. Rated IP69K, these fittings can handle the high pressures and temperatures of washdowns common in sanitary cleaning protocols. Made of stainless steel, they won’t corrode from water or harsh cleaners.

The seals on these fittings keep out water and contaminants. They also prevent metal-to-metal contact, which can create small gaps that trap bacteria. FDA compliant, the seals are safe for contact with food. Since they’re bright blue, they’re easy to spot if they fall off into your line.

These fittings have a single sleeve (ferrule) that bites into plastic tubing to make a seal—no heating, flaring, or soldering tools required. They’re also known as flareless fittings. Since they’re threaded, you can take apart their connections as needed for maintenance and repair.

For technical drawings and 3-D models, click on a part number.

Made of PTFE, these gaskets are chemically inert (except to molten alkali metal and elemental fluorine). They ensure a tight seal in quick-clamp stainless steel sanitary tube fittings.

Gaskets that meet DIN 32676 adhere to international standards for sanitary quick-clamp fittings.

For technical drawings and 3-D models, click on a part number.

When working in moist environments, these EPDM gaskets ensure a tight seal in quick-clamp stainless steel sanitary tube fittings.

Gaskets that meet DIN 32676 adhere to international standards for sanitary quick-clamp fittings.

For technical drawings and 3-D models, click on a part number.