Wall-Mount Waste Containers
Mount these containers to the wall to avoid using valuable floor space.
Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, gal. | Wd. | Dp. | Ht. | Circumference | For Use Outdoors | Hardware Included | Number of Holes | Hole Dia. | Each | |
Stainless Steel  | |||||||||||
| B | 2 | 10 1/2" | 4 3/4" | 9" | 30 1/2" | No | No | 4 | 3/8" | 0000000 | 000000 |
Waste Containers for Sharp Objects
Dispose of razor blades and other sharp objects with these single-use, sealable containers. They are also known as sharps containers and are puncture resistant. Not for landfill disposal.
Biohazard containers can also be used for needles.
Styles D-F are leak resistant. The exterior can be sterilized with steam.
| Style | Capacity | Ht. | Wd. | Dp. | Message | Color | Autoclavable | Each | |
| E | 2 gal. | 10" | 10 1/2" | 7 1/4" | Biohazard | Red | Yes | 00000000 | 00000 |
Safety Containers for Oily Waste
For temporary storage of oil- and solvent-soaked towels and brushes, these containers protect flammable contents from potential fire sources and spontaneous combustion.
Safety Disposal Cans for Flammable Liquids
Store leftover hazardous liquids until they can be properly discarded. The spring-loaded, self-closing cap on these cans automatically vents to relieve excess vapor pressure, and a flame arrester protects against outside ignition.
Plastic cans are for aggressive chemicals and corrosives.
High-Temperature Rectangular Plastic Batch Cans
For technical drawings and 3-D models, click on a part number.
Bottom Inside | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, gal. | Wd. | Dp. | Ht. | Wd. | Dp. | Thick. | Color | Clarity | Lid Type | Max. Temp., °F | Space Saving Features | Features | Each | |
Polypropylene Plastic | ||||||||||||||
| 2 | 10 3/4" | 10 3/4" | 9 1/4" | 8" | 8" | 3/16" | White | Semi-Clear | Loose Fitting | 220° | Stackable | Seamless | 0000000 | 0000000 |
Rectangular Plastic Batch Cans
These batch cans come with loose fitting dust covers to protect contents from dust and debris.
Bottom Inside | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, gal. | Wd. | Dp. | Ht. | Wd. | Dp. | Thick. | Color | Clarity | Lid Type | Max. Temp., °F | Space Saving Features | Features | Each | |
Polyethylene Plastic | ||||||||||||||
| 2 | 10 1/4" | 10 1/4" | 9 1/4" | 7 3/4" | 7 3/4" | 3/16" | White | Semi-Clear | Loose Fitting | 140° | Stackable | Seamless | 0000000 | 000000 |
Food Industry Round Metal Batch Cans
Safety Cans
Also known as Type I safety cans, these have a single opening for both filling and pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; and a flame arrester.
Powder-coated steel cans are for petroleum-based liquids. Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.
Safety Cans with Built-In Spout
Also known as Type II safety cans, these have two openings—one for filling, one for pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; flame arrester; and a vacuum-release valve for controlled pouring.
Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.
Style C have a rotating spout that flips down for pouring and up for storage.
Pressurized Liquid Dispensing Tanks
Attach a compressed air source to pressurize liquids for dispensing and spraying. Tanks have a dip tube that draws liquid from the bottom of the tank. All tanks meet the ASME rating for pressure vessels.
304 stainless steel tanks have good corrosion resistance.
316 stainless steel tanks have excellent corrosion resistance.
Tanks that cannot be sold to the listed areas are restricted due to safety regulations.
For technical drawings and 3-D models, click on a part number.
Overall | Opening | Port | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, gal. | Max. Pressure @ 100°F, psi | Dia. | Ht. | Lg. | Wd. | Pipe Size | Thread Type | Gender | No. of | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | |
Tanks without Mounting Plate | ||||||||||||||
304 Stainless Steel | ||||||||||||||
| 2 | 142 | 9" | 12" | 4 7/8" | 5 7/8" | 1/4 | NPT | Female | 4 | -20° to 200° | ASME BPVC.VIII.1 | Canada | 00000000 | 0000000 |
| 2 | 205 | 9" | 11 1/2" | 3 1/4" | 3 7/8" | 1/4 | NPT | Female | 4 | -20° to 200° | ASME BPVC.VIII.1 | Canada | 00000000 | 000000 |
316 Stainless Steel | ||||||||||||||
| 2 | 132 | 9" | 12" | 4 7/8" | 5 7/8" | 1/4 | NPT | Female | 4 | -20° to 300° | ASME BPVC.VIII.1 | Canada | 00000000 | 000000 |
| 2 | 185 | 9" | 12" | 3 1/4" | 3 7/8" | 1/4 | NPT | Female | 4 | -20° to 300° | ASME BPVC.VIII.1 | Canada | 0000000 | 000000 |
Vacuum closure caps are required to use tanks in vacuum applications.