Center-Locating Punch Sets for Unthreaded Holes
Fit these through existing holes and mark the center of the hole in a second workpiece.
| Number of Pieces | Includes | Tolerance Rating | Lg. | Punch Material | Grip Texture | Container Type | Each | |
Inch | ||||||||
|---|---|---|---|---|---|---|---|---|
| 28 | Punches with 3/32" to 1/2" (in 1/64ths increments), 17/32" Point Dia. | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 0000000 |
| 33 | Punches with 1/2" to 1" (in 1/64ths increments) Point Dia. | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 000000 |
Metric | ||||||||
| 25 | Punches with 1 to 13 mm (in 0.5 mm increments) Point Dia. | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 000000 |
| 25 | Punches with 13 to 25 mm (in 0.5 mm increments) Point Dia. | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 000000 |
Letter | ||||||||
| 26 | Punches with A to Z Letters | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 000000 |
Wire Gauge | ||||||||
| 60 | Punches with 60 to 1 Wire Gauge Sizes | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 000000 |
Expandable Center-Locating Punch Sets for Unthreaded Holes
Insert these punches into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size; strike it with a hammer to mark the center.
Material | |||||||
|---|---|---|---|---|---|---|---|
| Number of Pieces | Includes | Handle | Punch | Grip Texture | Container Type | Each | |
| 3 | One punch for 1/4"-5/16", 6-8mm diameter (3 3/4" length) One punch for 5/16"-7/16", 8-11mm diameter (4 1/8" length) One punch for 7/16-5/8", 11-16mm diameter (4 1/2" length) | Steel | Steel | Knurled | Plastic Case | 0000000 | 0000000 |
Center-Locating Punch Sets for Unthreaded Closed-End Holes
Also known as blind-hole spotters, these punches fit into closed-end holes and mark the center of a complementary hole. Once the punch is fitted in a hole, place your workpiece against the punch and strike with a hammer to make an indentation.
Center-Locating Punch Sets for Threaded Holes
Also known as transfer screws, these punches can be used in any threaded hole to transfer the hole location. Use the handle to screw a punch into a hole. Place your workpiece against the punch and strike it with a hammer to mark the hole location.
| Number of Pieces | Includes | Punch Material | Grip Texture | Container Type | Each | |
Inch | ||||||
|---|---|---|---|---|---|---|
| 16 | Handle, Four punches each in the following sizes: 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14 | Steel | Smooth | Plastic Case | 0000000 | 000000 |
| 16 | Handle, Four punches each in the following sizes: 4-40, 6-32, 8-32, 10-24 | Steel | Smooth | Plastic Case | 0000000 | 00000 |
| 16 | Handle, Four punches each in the following sizes: 1/2"-13, 9/16"-12, 5/8"-11, 3/4"-10 | Steel | Smooth | Plastic Case | 0000000 | 00000 |
Metric | ||||||
| 16 | Handle, Four punches each in the following sizes: M3, M4, M5, M6 | Steel | Smooth | Plastic Case | 0000000 | 00000 |
| 16 | Handle, Four punches each in the following sizes: M14, M16, M20, M24 | Steel | Smooth | Plastic Case | 0000000 | 00000 |
| 16 | Handle, Four punches each in the following sizes: M6, M8, M10, M12 | Steel | Smooth | Plastic Case | 0000000 | 00000 |
Self-Aligning Center-Locating Punch Sets for Threaded Holes
Also known as transfer screws, these punches have a uniform shoulder height so you can quickly transfer multiple hole locations at once. Thread the punches into closed-end holes and tighten with pliers or a wrench, then strike the workpiece with a hammer to mark the holes.
| Number of Pieces | Includes | Shoulder Ht. | Punch Material | Grip Texture | Each | |
| 12 | Four punches each in the following sizes: 10-24, 10-32, 1/4"-20 | 0.02" | Steel | Smooth | 0000000 | 000000 |
| 12 | Four punches each in the following sizes: 1/4"-20, 5/16"-18, 3/8"-16 | 0.02" | Steel | Smooth | 0000000 | 00000 |
| 12 | Four punches each in the following sizes: 1/2"-13, 5/8"-11, 3/4"-10 | 0.02" | Steel | Smooth | 0000000 | 00000 |
| 12 | Four punches each in the following sizes: 7/16"-14, 1/2"-13, 5/8"-11 | 0.02" | Steel | Smooth | 0000000 | 00000 |
| 12 | Four punches each in the following sizes: 5/16"-18, 3/8"-16, 1/2"-13 | 0.02" | Steel | Smooth | 0000000 | 00000 |