Thread the stud directly into a component or secure with a nut for through-hole mounting.

Support and guide loads on angle rails in food, pharmaceutical, and other sanitary environments. Also known as yoke-style cam followers, these track rollers offer more mounting flexibility than threaded alternatives and are typically mounted on shafts and clevis rod ends.

Guide loads along angle rail tracks in food and pharmaceutical plants or other sanitary environments.

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer.

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system.

The soft rubber or plastic surface on these rollers creates less noise than the metal surfaces found on other track rollers.

Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight.

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer.

Made of 440C stainless steel, these shaft-mount track rollers resist corrosion in damp environments.

Install these rollers in worn-out mounting holes or where you don’t have access to the back of the mounting hole. The stud is tapered, so you can quickly secure them in place with a set screw instead of a nut on the back like traditional rollers.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Made of stainless steel, these track rollers and guide rails are more corrosion resistant than steel rollers and rails.