Mounting Studs for Quick-Adjust Load-Securing Track
Stud with 1
Knurled Nut
Mount threaded accessories onto track. Adjust these studs by sliding them between slots on track.
Because they won’t slip, studs with a knurled nut offer more controlled adjustment than studs without a knurled nut.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Tie-Down Rings for Quick-Adjust Load-Securing Track
Ring with 1
Mounting Point
These rings pivot to let you secure loads in various directions. Use them with track as part of a system for load securing. Adjust by sliding them between slots on track.
The ring with two mounting points fits into two slots positions on the track; not for use with quick-adjust load-securing plates.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Inner Ring Wd. | Projection | End Fitting Material | For No. of Mounting Points | Each | |
Round Ring with 1 Mounting Point | ||||||
|---|---|---|---|---|---|---|
| 1,000 | 1 1/2" | 2" | Zinc-Plated Steel | 1 | 00000000 | 00000 |
Round Ring with 2 Mounting Points | ||||||
| 1,660 | 1 3/4" | 1 1/8" | Zinc-Plated Steel | 2 | 00000000 | 00000 |
D-Ring with 1 Mounting Point | ||||||
| 670 | 2 1/8" | 2 1/16" | Zinc-Plated Steel | 1 | 00000000 | 00000 |
Quick-Adjust Load-Securing Track
Slide fittings between slots on this track for quick adjustments. Also known as logistics track or L-track. Use track with straps, mounting studs, and other accessories as part of a system for load securing.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| Lg., ft. | Wd. | No. of Mounting Points | Mounting Fasteners Included | Mounting Hole Dia. | Ctr.-to-Ctr. Slot Lg. | Specifications Met | Each | |
Aluminum  | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 | 1 3/8" | 23 | No | 1/4" | 1" | MS33601 | 00000000 | 000000 |
| 4 | 1 3/8" | 47 | No | 1/4" | 1" | MS33601 | 00000000 | 00000 |
| 6 | 1 3/8" | 71 | No | 1/4" | 1" | MS33601 | 00000000 | 00000 |
| 8 | 1 3/8" | 95 | No | 1/4" | 1" | MS33601 | 00000000 | 00000 |
| 12 | 1 3/8" | 142 | No | 1/4" | 1" | MS33601 | 00000000 | 000000 |
Quick-Adjust Load-Securing Plates
When full lengths of track won't fit, use this plate to mount accessories that have a single mounting point. Use it with straps, mounting studs and other accessories that work with logistics or L-track load-securing systems.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| Dia. | No. of Mounting Points | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
Aluminum | |||||
|---|---|---|---|---|---|
| 1 3/4" | 1 | No | 3/16" | 00000000 | 000000 |
High-Tension Straps for Quick-Adjust Load-Securing Track
These straps have a ratchet buckle that tightens incrementally for maximum tension. They are also known as logistic straps.
Warning: Never use for lifting applications.
| Max. Lg., ft. | Fixed End Lg. | Capacity, lbs. | Color | End Fitting Material | Buckle Material | Each | |
Latex-Coated Polyester Fabric | |||||||
|---|---|---|---|---|---|---|---|
| 6 | 6" | 730 | Black | Aluminum | Zinc-Plated Steel | 00000000 | 000000 |
| 12 | 6" | 730 | Black | Aluminum | Zinc-Plated Steel | 00000000 | 00000 |
| 16 | 6" | 730 | Black | Aluminum | Zinc-Plated Steel | 00000000 | 00000 |
| 20 | 6" | 730 | Black | Aluminum | Zinc-Plated Steel | 00000000 | 00000 |
Hooks for Quick-Adjust Load-Securing Track
Slide these hooks into track to suspend items or attach a strap.
Warning: Never use for lifting applications.
Hook | End Fitting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Opening Wd. | Dia. | Style | No. of | Overall Wd. | Projection | Material | Color | For No. of Mounting Points | Each | ||
| 1 | 300 | 2 1/8" | 1/2" | J-Hook | 1 | 2 1/2" | 4" | Powder-Coated Steel | Black | 3 | 00000000 | 000000 |
| 2 | 300 | 10" | 3/8" | U-Hook | 1 | 2 1/2" | 11" | Powder-Coated Steel | Black | 3 | 00000000 | 00000 |
| 3 | 300 | 6 1/2" | 1/2" | L-Hook | 2 | 3 1/4" | 7" | Powder-Coated Steel | Black | 3 | 00000000 | 00000 |
| 4 | 300 | 4 1/8" | 3/8" | L-Hook | 3 | 14" | 4 1/4" | Powder-Coated Steel | Black | 3 | 00000000 | 00000 |
Cargo Nets for Quick-Adjust Load-Securing Track
Contain and organize bulky and oddly shaped loads with this net. Each corner has a tightening buckle and a track fitting that snaps into track to keep cargo from shifting inside vans, trucks, and trailers.
Warning: Never use for lifting applications.
Max. | Opening | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Material | Color | Lg. | Wd. | End Fitting Material | No. of Mounting Points | Distance Between Mounting Points | Each | |
| 80" | 60" | Polyester Fabric | Black | 13" | 9" | Aluminum | 8 | 26" | 00000000 | 0000000 |
Covers for Quick-Adjust Load-Securing Track
Block off unused track openings.
| Lg., ft. | Material | Color | Each | |
| 6 | PVC Plastic | Black | 0000000 | 000000 |
High-Tension Straps for Snap-In Load-Securing Track
These straps have a ratchet buckle that tightens incrementally for maximum tension. Also known as logistic straps, they have a fitting on at least one end that snaps securely into E-track to keep cargo from shifting inside vans, trucks, and trailers.
Straps with combination hook and ring form a loop around material.
Warning: Never use for lifting applications.
Buckle | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Lg., ft. | Fixed End Lg. | Wd. | Capacity, lbs. | Color | End Fitting Material | Hook Style | Ring Style | Lg. | Wd. | Material | Each | |
With One Track Fitting and One Combination Hook and Ring Fitting | ||||||||||||
Polyester Fabric | ||||||||||||
| 4 | 5" | 1" | 1,000 | Blue | Zinc-Plated Steel | Wire | D-Ring | 4 3/4" | 2 3/8" | Zinc-Plated Steel | 0000000 | 000000 |
| 4 | 5" | 1" | 1,000 | Blue | Zinc-Plated Steel | Latch | D-Ring | 4 3/4" | 2 3/8" | Zinc-Plated Steel | 0000000 | 00000 |
With Track Fittings on Both Ends | ||||||||||||
Polyester Fabric | ||||||||||||
| 12 | 4ft. | 2" | 1,000 | Yellow | Zinc-Plated Steel | __ | __ | 5 3/16" | 3 7/16" | Zinc-Plated Steel | 0000000 | 00000 |
| 16 | 4ft. | 2" | 1,000 | Gray | Zinc-Plated Steel | __ | __ | 5 3/16" | 3 7/16" | Zinc-Plated Steel | 0000000 | 00000 |
| 20 | 4ft. | 2" | 1,000 | Blue | Zinc-Plated Steel | __ | __ | 5 3/16" | 3 7/16" | Zinc-Plated Steel | 0000000 | 00000 |
Polyester Fabric with Reinforced Edges | ||||||||||||
| 12 | 4ft. | 2" | 1,000 | Yellow | Zinc-Plated Steel | __ | __ | 5 1/8" | 3 3/16" | Zinc-Plated Steel | 0000000 | 00000 |
| 16 | 4ft. | 2" | 1,000 | Yellow | Zinc-Plated Steel | __ | __ | 5 1/8" | 3 3/16" | Zinc-Plated Steel | 0000000 | 00000 |
| 20 | 4ft. | 2" | 1,000 | Yellow | Zinc-Plated Steel | __ | __ | 5 1/8" | 3 3/16" | Zinc-Plated Steel | 0000000 | 00000 |
Torque-Limiting Straps for Snap-In Load-Securing Track
Set the amount of tension on these straps to prevent damage from overtightening. They have a ratchet buckle that tightens incrementally. Also known as logistic straps, they have fittings on both ends that snap securely into track to keep cargo from shifting inside vans, trucks, and trailers.
Warning: Never use for lifting applications.
Quick-Tight Straps for Snap-In Load-Securing Track
Quickly increase and release tension over loads: lift the cam on the buckle, pull the webbing through, and release the cam to hold webbing in place. Also known as logistic straps, they have fittings on both ends that snap securely into track to keep cargo from shifting inside vans, trucks, and trailers.
Warning: Never use for lifting applications.
Buckle | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. Lg., ft. | Fixed End Lg., ft. | Wd. | Capacity, lbs. | Color | End Fitting Material | Lg. | Wd. | Material | Each | |
Polyester Fabric | ||||||||||
| 12 | 4 | 2" | 800 | Yellow | Zinc-Plated Steel | 2 15/16" | 2 7/16" | Zinc-Plated Steel | 0000000 | 000000 |
| 16 | 4 | 2" | 800 | Gray | Zinc-Plated Steel | 2 15/16" | 2 7/16" | Zinc-Plated Steel | 0000000 | 00000 |
| 20 | 4 | 2" | 800 | Blue | Zinc-Plated Steel | 2 15/16" | 2 7/16" | Zinc-Plated Steel | 0000000 | 00000 |
Polyester Fabric with Reinforced Edges | ||||||||||
| 12 | 4 | 2" | 800 | Yellow | Zinc-Plated Steel | 5 1/8" | 3 3/16" | Zinc-Plated Steel | 0000000 | 00000 |
| 16 | 4 | 2" | 800 | Yellow | Zinc-Plated Steel | 5 1/8" | 3 3/16" | Zinc-Plated Steel | 0000000 | 00000 |
| 20 | 4 | 2" | 800 | Yellow | Zinc-Plated Steel | 5 1/8" | 3 3/16" | Zinc-Plated Steel | 0000000 | 00000 |
Hooks for Snap-In Load-Securing Track
Snap these hooks into track to hang equipment or attach a strap as part of a system for load securing.
Warning: Never use for lifting applications.
Vertical Snap-In Load-Securing Track
Use this track, also known as E-track, to lay the groundwork for a tie-down system. Snap in straps, anchor points, and other accessories to keep cargo from shifting inside vans, trucks, and trailers.
For technical drawings and 3-D models, click on a part number.
Snap-In Load-Securing Plates
Also known as E-track, use these plates for a tie-down system in places where full lengths of track won't fit.
Snap straps, anchor points, and other accessories into Style A, B, and C plates.
Zinc-plated steel plates have mild corrosion resistance.
18-8 stainless steel plates have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Style | Capacity, lbs. | Lg. | Wd. | Color | Mounting Fasteners Included | Mounting Hole Lg. | Mounting Hole Wd. | Ctr.-to-Ctr. Slot Lg. | Each | |
Powder-Coated Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| A | Not Rated | 1" | 5 3/4" | Black | No | 5/16" | 5/16" | __ | 00000000 | 00000 |
Zinc-Plated Low-Carbon Steel | ||||||||||
| B | 1,000 | 1" | 4 1/2" | __ | __ | __ | __ | __ | 00000000 | 0000 |
Zinc-Plated Steel | ||||||||||
| A | Not Rated | 1" | 5 3/4" | __ | No | 5/16" | 5/16" | __ | 00000000 | 0000 |
| C | Not Rated | 5 1/4" | 6 3/8" | __ | Yes | 13/32" | 13/32" | 2" | 00000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| A | Not Rated | 1" | 5 3/4" | __ | No | 5/16" | 5/16" | __ | 00000000 | 0000 |
Horizontal Snap-In Load-Securing Track
Use this track, also known as E-Track, to lay the groundwork for a tie-down system. Snap in straps, anchor points, and other accessories to keep cargo from shifting inside vans, trucks, and trailers.
Galvanized steel track is corrosion resistant.
Aluminum track has excellent corrosion resistance and can easily be drilled through to mount.
For technical drawings and 3-D models, click on a part number.
Webbing Guides for Snap-In Load-Securing Track
This guide has a flat slot that accepts webbing and prevents it from twisting. It snaps into track for use in a load securing system.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| For Max. Webbing Wd. | Capacity, lbs. | End Fitting Material | Each | |
| 2" | 1,000 | Zinc-Plated Steel | 0000000 | 00000 |
Tie-Down Rings for Snap-In Load-Securing Track
These rings pivot to let you secure loads in various directions. Use them with track, straps, and other accessories to keep cargo from shifting inside vans, trucks, and trailers.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Cargo Nets for Snap-In Load-Securing Track
Contain and organize bulky and oddly shaped loads with this net. Each corner has a tightening buckle and a track fitting that snaps into track to keep cargo from shifting inside vans, trucks, and trailers.
Warning: Never use for lifting applications.
Max. | Opening | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Material | Color | Lg. | Wd. | End Fitting Material | No. of Mounting Points | Each | |
| 84 " | 48" | Polyester | Black | 10 3/4" | 12 7/8" | Zinc-Plated Steel | 4 | 00000000 | 0000000 |
Storage Bags for Snap-In Load-Securing Track
This bag snaps into track to create easy storage.
Warning: Never use for lifting applications.
| Lg. | Wd. | Material | Color | No. of Mounting Points | End Fitting Material | Each | |
| 24" | 14" | Vinyl Plastic | Gray | 2 | Zinc-Plated Steel | 00000000 | 000000 |
Couplings for Snap-In Load-Securing Track
Use this coupling to connect straps or convert end fittings from male to female. It has a single snap-in slot on each side.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | End Fitting Material | Each | |
| 1,000 | Zinc-Plated Steel | 00000000 | 000000 |
Webbing Tethers for Snap-In Load-Securing Track
Use these short lengths to tether material or with a coupling to add extra length to a ratchet strap.
Warning: Never use for lifting applications.
Wood-Beam Brackets for Snap-In Load-Securing Track
This bracket allows you to mount a wood 2×4 to track for economical load bracing.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| Each | ||
| 00000000 | 000000 |
Beams for Snap-In Load-Securing Track
These lightweight, aluminum beams snap into track between walls to brace a load or create a new level to maximize vertical space.
Note: Capacity is based on an evenly distributed load.
For technical drawings and 3-D models, click on a part number.