Store and transport liquids in bulk in sanitary environments such as food and pharmaceutical plants. These tanks have a one-piece sloped bottom for easy and complete drainage, a highly polished surface, and continuously welded seams. By leaving no room for liquid to hang around after use, their design prevents bacterial growth. Made of stainless steel, they resist frequent washdowns with harsh sanitizers. They connect with quick-clamp fittings—also known as tri-clamp fittings—so they’re easily disassembled for regular cleaning. Also known as intermediate bulk containers (IBCs), these tanks take up less floor space than drums. They can also be stacked up to three high to save additional space, even when full. All meet National Fire Protection Agency Code 30 for use with flammable and combustible liquids.

For technical drawings and 3-D models, click on a part number.

These tanks are UV resistant for long-term outdoor service.

For technical drawings and 3-D models, click on a part number.

These tanks are typically used for storing fuel and waste oil.

500-gal. capacity tank has nonslip steps and hand grips for easy access to the top of the tank.

For technical drawings and 3-D models, click on a part number.

Provide extra protection for products that require double-wall containment, such as diesel and waste oil, solvents, and antifreeze. The tank's second wall forms a spill-control compartment that holds 110% of the primary compartment's storage capacity. They have an opening for venting in the primary compartment, an opening for leak detection in the secondary compartment, and two openings for emergency venting in the primary and secondary compartments.

For technical drawings and 3-D models, click on a part number.

The 52" × 52" grating is sized to hold an IBC tank. The grating is removable for easy cleaning.

Add a bucket (sold separately) to catch spills and drips when dispensing from the tank. Bucket has a spill capacity of 3 gallons; spills larger than 3 gallons are channeled into the well in the bottom of the pallet.

Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC). The nozzles are made of either polypropylene or aluminum and the hose is PVC to resist corroding from citric acid, ethanol, and other chemicals. However, the nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. The nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.

Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.

Aluminum nozzles resist wear and tear better than polypropylene nozzles.