Measure with an accuracy of ±2%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

No need to pull the socket off the tool—push a button to release.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Turn sockets from above when there's not room to swing a standard wrench handle.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Anchor these multipliers for added stability.

Set a desired torque within the range.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Turn the end of the handle to set torque, and the wrench makes an audible click when it reaches the setting.

Set the desired torque and the driver indicates when it's reached.

Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. When set torque is reached, these drivers slip to disengage and prevent overtightening.

Set includes a handle and six shafts. Remove and replace the shaft to use a different size or drive style.

Attach a socket to the 1/4" square drive tip to turn hex nuts and hex head screws. When set torque is reached, these drivers signal with an audible click.

Also known as impact-free torque screwdrivers, these tools minimize reaction force when the set torque is reached. They reduce user fatigue when installing many fasteners in a short period of time.

Turn the handle like a standard torque driver and the 90° offset head reaches fasteners in tight spots. Factory-set screwdrivers ensure you reach the same torque every time.

Rated for ISO Class 5 (Fed. Std. Class 100) clean rooms, these tools have a sealed handle to keep lubrication in and contaminants out. Factory-set screwdrivers ensure you reach the same torque every time.

Set torque and the clutch slips to prevent you from exceeding it.

Attach a socket to the 1/4" square drive tip. These tools have a dial that shows how torque measurements change as you turn the driver. Use to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.

A green light and a beep alert you when you've reached 90% of your set torque, and a steady tone sounds once you've hit your target. Set your torque in cNm, cm-Kg, or in.-lbs. and quickly check the LCD for real-time measurements along the way. A red light warns if you begin to overtighten.

Set torque and the clutch slips to prevent you from exceeding it.

Often used to install carbide inserts in cutting tools, these keys have a small handle that prevents you from generating too much torque when turning a fastener.

Accurate to within ±1%, these torque testers are often used to check the accuracy of torque wrenches and screwdrivers on assembly lines.

Finger-tighten the three-jaw chuck onto a torque wrench or screwdriver, then twist either the gauge or tool to check the tool’s accuracy.

Use these connectors to test male square drive tools on torque testers that have a male square drive.

Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers.

Monitor torque as you apply it—these testers mount between your torque tool and your fastener.

Measure and record manually applied torque. These sensors convert torque into an electrical signal that your computer or programmable logic controller (PLC) can read.