We will reply to your message within an hour.
More
Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.
Pivot the head to access fasteners in tight spots.
No need to pull the socket off the tool—push a button to release.
Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.
Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.
Measure with an accuracy of ±2%.
Trust the precision of your measurements—these wrenches are accurate to ±1%.
These wrenches have an accuracy of ±2.0%.
The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.
A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.
Trust the precision of your measurements—these wrenches are accurate to ±2%.
Measure with an accuracy of ±7%.
These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.
Turn sockets from above when there's not room to swing a standard wrench handle.
When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.
Apply more torque than your wrench can deliver on its own. Use a multiplier with a torque wrench to ensure you do not exceed the maximum input torque.
Anchor these multipliers for added stability.
Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Set a desired torque within the range.
Adapters are set to a specific torque and cannot be adjusted.
A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.
Change heads to use these tools as an open-end, box, square drive, or hex-key wrench.