Titanium Wire | McMaster-Carr

Filter by

Material

For Joining

Shape

System of Measurement

Diameter

Length

Maximum Temperature

Specifications Met

DFARS Compliance

Tolerance Rating

Heat Treatment

REACH Compliance

RoHS Compliance

Hardness Rating

Appearance

Modulus of Elasticity

Hardness

Minimum Temperature

Container Net Weight

Tensile Strength

Container Type

Yield Strength

Mechanical Finish

Forward

How can we improve?

42 Products

Ultra-Corrosion-Resistant Grade 2 Titanium Wire

Temper Rating: Softened (Annealed)
Tensile Strength: 50,000 psi
Specifications Met: ASTM B863

Bend this wire and it will stay in place. Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical-processing equipment, heat exchangers, and marine hardware.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

			1/8 lb. Coil			1/4 lb. Coil
Dia.	Dia. Tolerance	Max. Temperature, °F	Lg., ft.		Each	Lg., ft.		Each
Matte
0.025"	-0.003" to 0.003"	500°	130	00000000	0000000	260	00000000	0000000
0.031"	-0.003" to 0.003"	500°	84	00000000	00000	165	00000000	000000
0.046"	-0.003" to 0.003"	500°	38	00000000	00000	76	00000000	000000
0.051"	-0.003" to 0.003"	500°	31	00000000	00000	62	00000000	000000
0.08"	-0.003" to 0.003"	500°	12	00000000	00000	25	00000000	000000
0.125"	-0.003" to 0.003"	500°	6	00000000	00000	12	00000000	000000

Ultra-Corrosion-Resistant Grade 2 Titanium Rods

Yield Strength: 40,000 psi
Hardness: Rockwell B65 (Medium)
Temper Rating: Softened (Annealed)
Specifications Met: ASTM B348

Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical processing equipment, heat exchangers, and marine hardware.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia.	Dia. Tolerance	Straightness Tolerance		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1/16"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	00000	00000	00000	00000	000000
1/8"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	0000	00000	00000	00000	00000
3/16"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	0000	00000	00000	00000	00000
1/4"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	00000	00000	00000	00000	00000
5/16"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	00000	00000	00000	00000	000000
3/8"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	00000	00000	00000	00000	000000
7/16"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	00000	00000	00000	000000	000000
1/2"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	00000	00000	000000	000000	000000
5/8"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	00000	00000	000000	000000	000000
3/4"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	00000	000000	000000	000000	000000
7/8"	-0.003" to 0.003"	1/16" per 5 ft.	00000000	00000	000000	000000	000000	000000

High-Strength Grade 5 Titanium Rods and Discs

Yield Strength: 120,000 psi
Hardness: Rockwell C30 (Hard)
Temper Rating: Softened (Annealed)
Specifications Met: ASTM B348

Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability. It's often used for turbine blades, fasteners, and spacer rings.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia.	Dia. Tolerance	Mechanical Finish	Straightness Tolerance		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1/8"	-0.003" to 0.003"	Ground	1/8" per 5 ft.	00000000	00000	000000	000000	000000	000000
3/16"	-0.003" to 0.003"	Ground	1/8" per 5 ft.	00000000	00000	00000	00000	00000	00000
1/4"	-0.003" to 0.003"	Ground	1/8" per 5 ft.	00000000	00000	00000	00000	00000	000000
5/16"	-0.003" to 0.003"	Ground	1/8" per 5 ft.	00000000	00000	00000	00000	000000	000000
3/8"	-0.003" to 0.003"	Ground	1/8" per 5 ft.	00000000	00000	00000	00000	000000	000000
1/2"	-0.002" to 0.002"	Ground	1/8" per 5 ft.	00000000	00000	00000	000000	000000	000000
5/8"	-0.002" to 0.002"	Ground	1/8" per 5 ft.	00000000	00000	00000	000000	000000	000000
3/4"	-0.002" to 0.002"	Ground	1/8" per 5 ft.	00000000	00000	000000	000000	000000	000000
7/8"	-0.002" to 0.002"	Ground	1/8" per 5 ft.	00000000	00000	000000	000000	000000	000000

TIG Welding Rods for Titanium

Often used in the aircraft and petrochemical industries, these welding rods join titanium alloys. They can weld in high-temperature applications that require chemical resistance.

For technical drawings and 3-D models, click on a part number.

						0.5 lbs.		1 lbs.
Dia.	Lg.	Welding Current Designation	Shielding Gas Required	Shielding Gas Included	Approximate Rods per Pound		Pkg.		Pkg.
ERTi-2
0.035"	36"	DCEN	Yes	No	180	00000000	0000000	00000000	0000000
0.045"	36"	DCEN	Yes	No	110	00000000	000000	00000000	000000
1/16"	36"	DCEN	Yes	No	50	0000000	00000	00000000	000000
3/32"	36"	DCEN	Yes	No	20	0000000	00000	00000000	000000
1/8"	36"	DCEN	Yes	No	10	00000000	00000	00000000	000000