McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    86 Products

    High-Strength Grade 5 Titanium Rods and Discs

    Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability. It's often used for turbine blades, fasteners, and spacer rings.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Rods
    Image of Product. Front orientation. Titanium. High-Strength Grade 5 Titanium Rods and Discs.
    Dia.
    Dia. Tolerance
    Mechanical
    Finish
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    1/2 ft.
    Long
    1 ft.
    Long
    2 ft.
    Long
    3 ft.
    Long
    6 ft.
    Long
    1/8"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    000000
    000000
    000000
    000000
    3/16"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    00000
    00000
    00000
    1/4"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    00000
    00000
    000000
    5/16"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    00000
    000000
    000000
    3/8"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    00000
    000000
    000000
    1/2"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    000000
    000000
    000000
    5/8"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    000000
    000000
    000000
    3/4"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    000000
    000000
    000000
    000000
    7/8"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    000000
    000000
    000000
    000000
    1"-0.0025" to 0.0025"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    000000
    000000
    000000
    1 1/4"-0.0025" to 0.0025"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    000000
    000000
    00000000
    1 1/2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    000000
    000000
    00000000
    1 3/4"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    000000
    00000000
    00000000
    2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    00000000
    00000000
    00000000
    2 1/4"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    00000000
    00000000
    00000000
    2 1/2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    00000000
    00000000
    00000000
    Discs
    Image of Product. Front orientation. Titanium. High-Strength Grade 5 Titanium Rods and Discs.
    1/2" Long
    1" Long
    Dia.
    Dia. Tolerance
    Mechanical
    Finish
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    Each
    Each
    2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B348———0000000000000000
    3"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000000000000000000000
    3 1/2"-0.005" to 0.005"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000000000000000000000
    4"0" to 0.062"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000000000000000000000
    5"0" to 0.078"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000000000000000000000

    Ultra-Corrosion-Resistant Grade 2 Titanium Rods

    Image of Product. Front orientation. Titanium. Ultra-Corrosion-Resistant Grade 2 Titanium Rods.
    Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical-processing equipment, heat exchangers, and marine hardware.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Dia.
    Dia. Tolerance
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    1/2 ft.
    Long
    1 ft.
    Long
    2 ft.
    Long
    3 ft.
    Long
    6 ft.
    Long
    1/16"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    00000
    00000
    00000
    00000
    000000
    1/8"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    0000
    00000
    00000
    00000
    00000
    3/16"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    0000
    00000
    00000
    00000
    00000
    1/4"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    00000
    00000
    00000
    00000
    00000
    5/16"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    00000
    00000
    00000
    00000
    000000
    3/8"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    00000
    00000
    00000
    00000
    000000
    7/16"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    00000
    00000
    00000
    000000
    000000
    1/2"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    00000
    00000
    000000
    000000
    000000
    5/8"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    00000
    00000
    000000
    000000
    000000
    3/4"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    00000
    000000
    000000
    000000
    000000
    7/8"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    00000
    000000
    000000
    000000
    000000
    1"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    000000
    000000
    000000
    000000
    000000
    1 1/4"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    000000
    000000
    000000
    000000
    00000000
    1 1/2"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    000000
    000000
    000000
    000000
    00000000
    1 3/4"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    000000
    000000
    000000
    00000000
    00000000
    2"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    000000
    000000
    00000000
    00000000
    00000000
    2 1/4"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    000000
    000000
    00000000
    00000000
    00000000
    2 1/2"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34800000000
    000000
    000000
    00000000
    00000000
    00000000

    Ultra-Corrosion-Resistant Grade 4 Titanium Rods

    Image of Product. Front orientation. Titanium. Ultra-Corrosion-Resistant Grade 4 Titanium Rods.
    These titanium rods are the strongest of the commercially pure titanium alloys, Grades 1 through 4, and resist corrosion better than Grade 5 titanium. However, they’re not as strong as Grade 5, and they won’t bend or form as easily as lower grades. Use them in chemical processing and marine environments. Nearly 99% pure, these rods won’t corrode from chlorides or oxidizing acids, such as hydrochloric and sulfuric acids. They also stand up to alkalis, such as hydroxide and ammonia. With more iron and oxygen than lower grade titanium, these rods are lightweight as well as strong. They also withstand impacts at low temperatures.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Dia.
    Dia. Tolerance
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    1/2 ft.
    Long
    1 ft.
    Long
    2 ft.
    Long
    3 ft.
    Long
    6 ft.
    Long
    1/8"-0.005" to 0.005"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B348000000
    00000
    000000
    000000
    000000
    000000
    3/16"-0.005" to 0.005"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B348000000
    00000
    00000
    00000
    00000
    00000
    1/4"-0.005" to 0.005"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B348000000
    00000
    00000
    00000
    00000
    000000
    3/8"-0.006" to 0.006"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B348000000
    00000
    00000
    00000
    000000
    000000
    1/2"-0.007" to 0.007"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B348000000
    00000
    00000
    000000
    000000
    000000
    3/4"-0.008" to 0.008"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B348000000
    00000
    000000
    000000
    000000
    000000
    1"-0.009" to 0.009"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B3480000000
    000000
    000000
    000000
    000000
    000000

    Easy-Weld Grade 9 Titanium

    Image of Product. Front orientation. Titanium. Easy-Weld Grade 9 Titanium.
    Grade 9 titanium has less aluminum and vanadium than Grade 5, so it's easier to weld but not as strong.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Wall
    Thk.
    OD
    OD
    Tolerance
    ID
    ID Tolerance
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Temper
    Rating
    Fabrication
    Specs. Met
    1 ft.
    Long
    3 ft.
    Long
    5 ft.
    Long
    0.016"1/4"0" to 0.004"0.218"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49450000000
    000000
    0000000
    0000000
    0.019"3/8"0" to 0.004"0.337"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49450000000
    00000
    000000
    000000
    0.02"1/4"0" to 0.004"0.21"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49450000000
    00000
    000000
    000000
    0.026"1/2"0" to 0.004"0.448"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49450000000
    00000
    000000
    000000
    0.028"3/8"0" to 0.004"0.319"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49450000000
    00000
    000000
    000000
    0.032"5/8"0" to 0.004"0.561"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49450000000
    00000
    000000
    000000
    0.039"3/4"0" to 0.004"0.672"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49450000000
    000000
    000000
    000000
    0.051"1"0" to 0.004"0.898"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49450000000
    000000
    000000
    000000

    Threaded Rods

    Anchor, connect, or hang components in a wide variety of applications, from mounting I-beams to suspending light fixtures.
    Titanium
    Image of Product. Front orientation. Threaded Rods. Threaded Rods.
    Ultra-Corrosion-Resistant Lightweight Grade 2 Titanium—The best of both worlds, these rods are lightweight like aluminum and more corrosion resistant than 316 stainless steel. Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9.
    Lg.,
    ft.
    Tensile Strength,
    psi
    Hardness
    Specs.
    Met
    Each
    Ultra-Corrosion-Resistant Lightweight Grade 2 Titanium
     
    8-32
    150,000Rockwell B80ASTM B348000000000000000
    350,000Rockwell B80ASTM B348000000000000000
     
    10-24
    150,000Rockwell B80ASTM B34800000000000000
    350,000Rockwell B80ASTM B348000000000000000
     
    1/4"-20
    150,000Rockwell B80ASTM B34800000000000000
    350,000Rockwell B80ASTM B348000000000000000
     
    5/16"-18
    150,000Rockwell B80ASTM B34800000000000000
    350,000Rockwell B80ASTM B348000000000000000
     
    3/8"-16
    150,000Rockwell B80ASTM B34800000000000000
    350,000Rockwell B80ASTM B348000000000000000
     

    Dowel Pins

    Precisely align machine parts and prevent movement during assembly. These dowel pins are machined to tight tolerances and have a uniform diameter for a snug fit. They can also be used as a pivot, shaft, or hinge to join moving components. Since dowel pins can be hard to remove, they are best suited for permanent fixtures that don't require frequent adjustments or disassembly.
    Lightweight Corrosion-Resistant Titanium
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Plain Head.
    Grade 2 Titanium—The best of both worlds, these pins are lightweight like aluminum and as corrosion resistant as 316 stainless steel. Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9. This makes them ideal for use in chemical-processing and water-treatment facilities since they stand up to strong acids and other harsh chemicals.
    Lg.
    Dia. Tolerance
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Each
    Grade 2 Titanium
     
    1/8" Diameter
    1/4"0.0001" to 0.0003"Not RatedNot Rated000000000000000
    5/16"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    3/8"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1/2"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    5/8"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    3/4"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1"0.0001" to 0.0003"Not RatedNot Rated00000000000000
     
    3/16" Diameter
    3/8"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1/2"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    5/8"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    3/4"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1"0.0001" to 0.0003"Not RatedNot Rated00000000000000
     
    1/4" Diameter
    1/2"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    5/8"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    3/4"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1 1/2"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    2"0.0001" to 0.0003"Not RatedNot Rated00000000000000
     
    back to top