The handles are angled 90° from the blade so you can cut material from directly above tight spaces.

Make straight and curved cuts in sheet metal—these sets come with three tools for different cutting patterns. Also called aviation snips, they have a double hinge, so they cut with more force and require less effort to squeeze the handles than standard sheet metal cutters.

Snip tighter curves in smaller spaces than standard high-force cutters.

This cutter has two blades that cut a 1/8" wide strip—peel it back for smooth edges with little distortion.

Also known as bulldog snips, these have long handles and short blades for cutting through thick sheet metal with less effort than standard sheet metal cutters.

Made from aluminum bronze, the blade and handle on these cutters inhibit sparking and are FM approved. Use them for straight cuts.

Handles are angled to keep your hand away from the material as you cut straight lines and curves.

The unique shape of these cutters gives you 40% more power per cut than standard sheet metal cutters. When blades get dull, loosen a few screws to replace them.

Use to cut patterns in flat material with minimal material loss and less effort compared to manual cutters.

Convert your drill into a sheet metal cutter to make quick, low-effort cuts without a separate power tool.

Also known as scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut metal up to 1/64" thick with minimal material loss and edge distortion.

Make long, straight cuts around your facility—these cutters have a 12" blade and are light enough to move from bench top to bench top.

Move these lightweight cutters wherever you need to make clean, straight cuts through metal.