Dimples hold the base tight to prevent it from swiveling.

Accommodate ties in any direction with these rings that swivel all the way around.

Also known as pad eyes, these rigid rings provide a strong, fixed anchor point.

Large holes in the base allow adhesive to flow through.

Use these rings to make a temporary anchor point on ferrous metal surfaces.

Permanently sew webbing onto these hooks.

Press the button to retract the webbing for easy storage.

Use this webbing in tie down and towing applications. It absorbs shock and will not scratch or damage the contact surface.

Each end of these straps has a hook and a movable ring—use them separately or together to create a soft loop in a choker configuration.

These tie downs meet D.O.T., California Highway Patrol, and CVSA requirements.

Bolt these tie downs directly to a surface or mount them with a hook, bracket, or cargo track fitting.

Position the ratchet buckle anywhere along the webbing to access the buckle more easily.

Pull rope through the automatic-locking buckle to tension; press the lever to release.

Shorten the length of the tie downs between the hooks.

These tie downs won't become brittle or hard after exposure to sunlight.

Shorten the length of the tie downs between the hooks.

Suitable for marine environments, these tie downs resist corrosion from salt water and chlorine.

With the strength of plastic and the stretch of rubber, these polyurethane rubber tie downs have excellent stretch recovery and won't become brittle.

Adjust the length by attaching the hook into a slot in the strap.

These rings pivot to secure loads in various directions.

The ring pivots to secure loads in various directions.

Adjust the location of the hook along the cord.

Attach these hooks to elastic cord to make a tie down.

This cord has excellent stretch recovery and won't become brittle.

Color-coded by the year and quarter of manufacture, this cotton-covered elastic cord meets MIL-C-5651.

These straps have holes on each end to accept a hook.

Strap is wider than cord to distribute pressure across the load.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

Weld these hooks into place to create a permanent lifting device.

Slide the clevis pin into these hooks to attach chain. A latch ensures rope, chain, and fittings won't detach from the hook when the load slackens.

The opening on these hooks fits large anchor points and allows chain to slide through when the hook is closed. They have a spring latch to ensure rope, chain, and fittings won't detach from the hook when the load slackens.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

For a more secure connection than standard hooks, the latch locks closed when a load is applied.

For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.

A ball-bearing swivel allows these hooks to rotate under load. Attach to chain by inserting the included pin through a link.

These rotate for easy positioning before a load is applied.

With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.

The latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Attach chain to the eye end of these hooks.

An unthreaded shank allows you to cut your own threads.

Often used in binding and tie-down applications, these hooks have a narrow opening to securely hold a single link of chain.