The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.

Tapered on one end, these inserts are easy to guide into a hole during installation. The threaded rod on the other end creates an attachment point for components on plastic parts.

With the male threaded end on these inserts, mount components directly to plastic parts.

Made from brass, these inserts are electrically conductive, nonmagnetic, and have good corrosion resistance.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.

Made of 18-8 stainless steel, these inserts are stronger than brass inserts and less likely to corrode from mild chemicals and water. Install them into plastic to add durable threads.

70% lighter than stainless steel, these aluminum inserts are mildly corrosion resistant and nonmagnetic.

Use these inserts to install fine-thread screws in existing holes.

Integrate strong metal threads as you make parts through injection molding. These inserts become inseparable from your parts, forming a stronger bond in plastic than heat-set inserts and press-fit inserts.